Bauhn HE210254 User manual

• CAUTION: No pars of the Selie Gimbal are user
serviceable. Do not disassemble any par of the remote
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme
temperatures during use, storage or transporation.
• If the battery is subjected to low air pressure at high
altitude.
• Replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of
some lithium battery types).
• Disposal of a battery into ire or a hot oven, or
mechanically crushing or cutting of a battery, can
result in an explosion.
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of lammable
liquid or gas.
• CAUTION: Do not ingest battery, chemical burn hazard
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours
and can lead to death
• Keep new and used batteries away from children
• If the battery comparment does not close securely,
stop using the product and keep it away from children
• If you think batteries might have been swallowed or
placed inside any par of the body, seek immediate
medical attention
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Never add any attachments and/or equipment without
the approval of the manufacturer
• Keep away from children
• Supervise young children to ensure they do not play
with the product
Safety Instructions Product Overview
Technical information
Usage Usage
1. Phone cradle
2. Wing nut
3. Extension pole
4. Bluetooth
remote
5. Tripod
6. LED indicator
light
7. Micro USB
charging por
8. Power button
9. Gimbal motor
10. Cradle lock
• Bluetooth 4.2
• Transmission distance: Up to 10m
• 450mAh lithium battery
• Input Rating: 5V d.c. 1A
Charging the gimbal
When battery in the gimbal is low the LED
indicator light will star lashing red. We
recommend that your charge your gimbal
fully before your irst use (approximately 3
hours for a full charge).
1. Connect the micro USB end of the cable
to the micro USB por and the other
end of the cable to a computer or a USB
adaptor (computer and USB adaptor
not included)
2. The indicator light will stay red to show
that the gimbal is charging
3. Once the gimbal is fully charged the
indictor light will turn of, unplug the
charging cable and your gimbal is ready
for use
Unfold the gimbal
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
Pairing your mobile device with the
Bluetooth remote
1. Press the remote button for 4 seconds
to turn the power on. A small LED light
will lash on the remote to indicate
pairing
2. Turn on Bluetooth on your mobile
phone, search and pair with “Gimbal
Selie”
NOTE: Make sure your mobile is visible to other
devices for the irst pairing
3. The LED indicator will stop lashing aer
pairing has been successful
NOTE:
• The remote control will automatically shut
down aer 5 minutes if not paired
• The remote control will automatically sleep
aer 10 mins without any operation and
auto shut down aer another 10 mins if
not used
• Long press the remote button to power of.
The LED indicator will lash 3 times then the
remote control will shut down
• Taking a photo: When the Bluetooth remote
is connected to the mobile phone, shor
press of the camera button and the blue
light will lash
USER GUIDE
HE210254
12/21
SELFIE GIMBAL
6
7
3
8
1
4
5
2
9
10

• CAUTION: No pars of the Selie Gimbal are user
serviceable. Do not disassemble any par of the remote
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme
temperatures during use, storage or transporation.
• If the battery is subjected to low air pressure at high
altitude.
• Replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of
some lithium battery types).
• Disposal of a battery into ire or a hot oven, or
mechanically crushing or cutting of a battery, can
result in an explosion.
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of lammable
liquid or gas.
• CAUTION: Do not ingest battery, chemical burn hazard
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours
and can lead to death
• Keep new and used batteries away from children
• If the battery comparment does not close securely,
stop using the product and keep it away from children
• If you think batteries might have been swallowed or
placed inside any par of the body, seek immediate
medical attention
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Never add any attachments and/or equipment without
the approval of the manufacturer
• Keep away from children
• Supervise young children to ensure they do not play
with the product
Safety Instructions Product Overview
Technical information
Usage Usage
1. Phone cradle
2. Wing nut
3. Extension pole
4. Bluetooth
remote
5. Tripod
6. LED indicator
light
7. Micro USB
charging por
8. Power button
9. Gimbal motor
10. Cradle lock
• Bluetooth 4.2
• Transmission distance: Up to 10m
• 450mAh lithium battery
• Input Rating: 5V d.c. 1A
Charging the gimbal
When battery in the gimbal is low the LED
indicator light will star lashing red. We
recommend that your charge your gimbal
fully before your irst use (approximately 3
hours for a full charge).
1. Connect the micro USB end of the cable
to the micro USB por and the other
end of the cable to a computer or a USB
adaptor (computer and USB adaptor
not included)
2. The indicator light will stay red to show
that the gimbal is charging
3. Once the gimbal is fully charged the
indictor light will turn of, unplug the
charging cable and your gimbal is ready
for use
Unfold the gimbal
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
Pairing your mobile device with the
Bluetooth remote
1. Press the remote button for 4 seconds
to turn the power on. A small LED light
will lash on the remote to indicate
pairing
2. Turn on Bluetooth on your mobile
phone, search and pair with “Gimbal
Selie”
NOTE: Make sure your mobile is visible to other
devices for the irst pairing
3. The LED indicator will stop lashing aer
pairing has been successful
NOTE:
• The remote control will automatically shut
down aer 5 minutes if not paired
• The remote control will automatically sleep
aer 10 mins without any operation and
auto shut down aer another 10 mins if
not used
• Long press the remote button to power of.
The LED indicator will lash 3 times then the
remote control will shut down
• Taking a photo: When the Bluetooth remote
is connected to the mobile phone, shor
press of the camera button and the blue
light will lash
USER GUIDE
HE210254
12/21
SELFIE GIMBAL
6
7
3
8
1
4
5
2
9
10

• CAUTION: No pars of the Selie Gimbal are user
serviceable. Do not disassemble any par of the remote
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme
temperatures during use, storage or transporation.
• If the battery is subjected to low air pressure at high
altitude.
• Replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of
some lithium battery types).
• Disposal of a battery into ire or a hot oven, or
mechanically crushing or cutting of a battery, can
result in an explosion.
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of lammable
liquid or gas.
• CAUTION: Do not ingest battery, chemical burn hazard
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours
and can lead to death
• Keep new and used batteries away from children
• If the battery comparment does not close securely,
stop using the product and keep it away from children
• If you think batteries might have been swallowed or
placed inside any par of the body, seek immediate
medical attention
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Never add any attachments and/or equipment without
the approval of the manufacturer
• Keep away from children
• Supervise young children to ensure they do not play
with the product
Safety Instructions Product Overview
Technical information
Usage Usage
1. Phone cradle
2. Wing nut
3. Extension pole
4. Bluetooth
remote
5. Tripod
6. LED indicator
light
7. Micro USB
charging por
8. Power button
9. Gimbal motor
10. Cradle lock
• Bluetooth 4.2
• Transmission distance: Up to 10m
• 450mAh lithium battery
• Input Rating: 5V d.c. 1A
Charging the gimbal
When battery in the gimbal is low the LED
indicator light will star lashing red. We
recommend that your charge your gimbal
fully before your irst use (approximately 3
hours for a full charge).
1. Connect the micro USB end of the cable
to the micro USB por and the other
end of the cable to a computer or a USB
adaptor (computer and USB adaptor
not included)
2. The indicator light will stay red to show
that the gimbal is charging
3. Once the gimbal is fully charged the
indictor light will turn of, unplug the
charging cable and your gimbal is ready
for use
Unfold the gimbal
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
Pairing your mobile device with the
Bluetooth remote
1. Press the remote button for 4 seconds
to turn the power on. A small LED light
will lash on the remote to indicate
pairing
2. Turn on Bluetooth on your mobile
phone, search and pair with “Gimbal
Selie”
NOTE: Make sure your mobile is visible to other
devices for the irst pairing
3. The LED indicator will stop lashing aer
pairing has been successful
NOTE:
• The remote control will automatically shut
down aer 5 minutes if not paired
• The remote control will automatically sleep
aer 10 mins without any operation and
auto shut down aer another 10 mins if
not used
• Long press the remote button to power of.
The LED indicator will lash 3 times then the
remote control will shut down
• Taking a photo: When the Bluetooth remote
is connected to the mobile phone, shor
press of the camera button and the blue
light will lash
USER GUIDE
HE210254
12/21
SELFIE GIMBAL
6
7
3
8
1
4
5
2
9
10

• CAUTION: No pars of the Selie Gimbal are user
serviceable. Do not disassemble any par of the remote
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme
temperatures during use, storage or transporation.
• If the battery is subjected to low air pressure at high
altitude.
• Replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of
some lithium battery types).
• Disposal of a battery into ire or a hot oven, or
mechanically crushing or cutting of a battery, can
result in an explosion.
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of lammable
liquid or gas.
• CAUTION: Do not ingest battery, chemical burn hazard
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours
and can lead to death
• Keep new and used batteries away from children
• If the battery comparment does not close securely,
stop using the product and keep it away from children
• If you think batteries might have been swallowed or
placed inside any par of the body, seek immediate
medical attention
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Never add any attachments and/or equipment without
the approval of the manufacturer
• Keep away from children
• Supervise young children to ensure they do not play
with the product
Safety Instructions Product Overview
Technical information
Usage Usage
1. Phone cradle
2. Wing nut
3. Extension pole
4. Bluetooth
remote
5. Tripod
6. LED indicator
light
7. Micro USB
charging por
8. Power button
9. Gimbal motor
10. Cradle lock
• Bluetooth 4.2
• Transmission distance: Up to 10m
• 450mAh lithium battery
• Input Rating: 5V d.c. 1A
Charging the gimbal
When battery in the gimbal is low the LED
indicator light will star lashing red. We
recommend that your charge your gimbal
fully before your irst use (approximately 3
hours for a full charge).
1. Connect the micro USB end of the cable
to the micro USB por and the other
end of the cable to a computer or a USB
adaptor (computer and USB adaptor
not included)
2. The indicator light will stay red to show
that the gimbal is charging
3. Once the gimbal is fully charged the
indictor light will turn of, unplug the
charging cable and your gimbal is ready
for use
Unfold the gimbal
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
Pairing your mobile device with the
Bluetooth remote
1. Press the remote button for 4 seconds
to turn the power on. A small LED light
will lash on the remote to indicate
pairing
2. Turn on Bluetooth on your mobile
phone, search and pair with “Gimbal
Selie”
NOTE: Make sure your mobile is visible to other
devices for the irst pairing
3. The LED indicator will stop lashing aer
pairing has been successful
NOTE:
• The remote control will automatically shut
down aer 5 minutes if not paired
• The remote control will automatically sleep
aer 10 mins without any operation and
auto shut down aer another 10 mins if
not used
• Long press the remote button to power of.
The LED indicator will lash 3 times then the
remote control will shut down
• Taking a photo: When the Bluetooth remote
is connected to the mobile phone, shor
press of the camera button and the blue
light will lash
USER GUIDE
HE210254
12/21
SELFIE GIMBAL
6
7
3
8
1
4
5
2
9
10

• CAUTION: No pars of the Selie Gimbal are user
serviceable. Do not disassemble any par of the remote
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme
temperatures during use, storage or transporation.
• If the battery is subjected to low air pressure at high
altitude.
• Replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of
some lithium battery types).
• Disposal of a battery into ire or a hot oven, or
mechanically crushing or cutting of a battery, can
result in an explosion.
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of lammable
liquid or gas.
• CAUTION: Do not ingest battery, chemical burn hazard
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours
and can lead to death
• Keep new and used batteries away from children
• If the battery comparment does not close securely,
stop using the product and keep it away from children
• If you think batteries might have been swallowed or
placed inside any par of the body, seek immediate
medical attention
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Never add any attachments and/or equipment without
the approval of the manufacturer
• Keep away from children
• Supervise young children to ensure they do not play
with the product
Safety Instructions Product Overview
Technical information
Usage Usage
1. Phone cradle
2. Wing nut
3. Extension pole
4. Bluetooth
remote
5. Tripod
6. LED indicator
light
7. Micro USB
charging por
8. Power button
9. Gimbal motor
10. Cradle lock
• Bluetooth 4.2
• Transmission distance: Up to 10m
• 450mAh lithium battery
• Input Rating: 5V d.c. 1A
Charging the gimbal
When battery in the gimbal is low the LED
indicator light will star lashing red. We
recommend that your charge your gimbal
fully before your irst use (approximately 3
hours for a full charge).
1. Connect the micro USB end of the cable
to the micro USB por and the other
end of the cable to a computer or a USB
adaptor (computer and USB adaptor
not included)
2. The indicator light will stay red to show
that the gimbal is charging
3. Once the gimbal is fully charged the
indictor light will turn of, unplug the
charging cable and your gimbal is ready
for use
Unfold the gimbal
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
Pairing your mobile device with the
Bluetooth remote
1. Press the remote button for 4 seconds
to turn the power on. A small LED light
will lash on the remote to indicate
pairing
2. Turn on Bluetooth on your mobile
phone, search and pair with “Gimbal
Selie”
NOTE: Make sure your mobile is visible to other
devices for the irst pairing
3. The LED indicator will stop lashing aer
pairing has been successful
NOTE:
• The remote control will automatically shut
down aer 5 minutes if not paired
• The remote control will automatically sleep
aer 10 mins without any operation and
auto shut down aer another 10 mins if
not used
• Long press the remote button to power of.
The LED indicator will lash 3 times then the
remote control will shut down
• Taking a photo: When the Bluetooth remote
is connected to the mobile phone, shor
press of the camera button and the blue
light will lash
USER GUIDE
HE210254
12/21
SELFIE GIMBAL
6
7
3
8
1
4
5
2
9
10

How to use the gimbal
1. Ensure that the phone cradle is not
locked, open clasp and place your
phone in the cradle and make sure that
your phone is in the centre
2. Aer clamping the phone and keeping
the phone in a neutral position, press
and hold the gimbal power button for 5
seconds to star up
a. The stabiliser will activate and
conigure itself
3. The gimbal can be used with the
extension pole either retracted or
extended (Best used with up to 3
telescopic rods extended (within
50cm))
4. Press and hold for 3 seconds to shut
down
Changing the orientation of the
phone in gimbal mode
1. Click the gimbal power
button once to rotate the
phone cradle clockwise
or double click to rotate
counter-clockwise
NOTE:
• Ensure the cradle is not
in the lock position before
using the gimbal.
• Do not force the gimbal
into into position. It will
automatically rotate for you
when you press the power
button.
How to open the tripod
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. At the handle, open the legs outwards
to their maximum for stability
5.
NOTE:
• Please ensure that the middle pole
is touching the ground to help with
stabilisation.
• We do not recommend extending the pole
height past the warning label as this could
cause the tripod to become unstable.
How to use as a selie stick
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. Extend pole
NOTE:
• You can change the direction of the phone
cradle if needed by unlocking the phone
cradle and manually moving it.
• DO NOT move the phone cradle when it
is locked as this can damage or break
the lock.
Reminder
• The selie gimbal is compatible with
Android 4.2.2, Android devices and iOS
5.0 or above on iPhone
• When using the phone clamp please
ensure that the phone is presses
against the back of the phone clamp
• Gimbal mode: best used with up to
3 telescopic rods extended (within
50cm)
• Selie stick mode: best used with up
to 5 telescopic rods extended (within
70cm)
• CAUTION: No pars of the Selie
Gimbal are user serviceable. Do not
disassemble any par of the remote
Repair and Refurbished Goods or
Parts Notice
AFTER SALES SUPPORT
1300 663 907
AUS
YEAR WARRANTY
1
SELFIE GIMBAL
[e-mail]
Unfortunately, from time to time, faulty products are
manufactured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining
user-generated data (such asles stored on a computer
hard drive, telephone numbers stored on a mobile
telephone, songs stored on a portable media player, games
saved on a games console or les stored on a USB memory
stick) during the process of repair, some or all of your stored
data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing goods,
we may replace them withrefurbished goods of the same
type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on1300 663 907 or write to us at:
Balco Brands Pty Ltd
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[e-mail]
MODEL: HE210254
PRODUCT CODE: XXX 12/2021
The product is guaranteed to be free from defects
in workmanship and parts for a period of 12
months from the date of purchase. Defects that
occur within this warranty period, under normal
use and care, will be repaired, replaced or
refunded at our discretion. The benets conferred
by this warranty are in addition to all rights and
remedies in respect of the product that the
consumer has under the Competition and
Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage.You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
REGISTER YOUR PURCHASE AT
www.aldi.com.au/en/about-aldi/product-registration/TO KEEP
UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Warranty Details
SELFIE GIMBAL
Usage Usage Usage

How to use the gimbal
1. Ensure that the phone cradle is not
locked, open clasp and place your
phone in the cradle and make sure that
your phone is in the centre
2. Aer clamping the phone and keeping
the phone in a neutral position, press
and hold the gimbal power button for 5
seconds to star up
a. The stabiliser will activate and
conigure itself
3. The gimbal can be used with the
extension pole either retracted or
extended (Best used with up to 3
telescopic rods extended (within
50cm))
4. Press and hold for 3 seconds to shut
down
Changing the orientation of the
phone in gimbal mode
1. Click the gimbal power
button once to rotate the
phone cradle clockwise
or double click to rotate
counter-clockwise
NOTE:
• Ensure the cradle is not
in the lock position before
using the gimbal.
• Do not force the gimbal
into into position. It will
automatically rotate for you
when you press the power
button.
How to open the tripod
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. At the handle, open the legs outwards
to their maximum for stability
5.
NOTE:
• Please ensure that the middle pole
is touching the ground to help with
stabilisation.
• We do not recommend extending the pole
height past the warning label as this could
cause the tripod to become unstable.
How to use as a selie stick
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. Extend pole
NOTE:
• You can change the direction of the phone
cradle if needed by unlocking the phone
cradle and manually moving it.
• DO NOT move the phone cradle when it
is locked as this can damage or break
the lock.
Reminder
• The selie gimbal is compatible with
Android 4.2.2, Android devices and iOS
5.0 or above on iPhone
• When using the phone clamp please
ensure that the phone is presses
against the back of the phone clamp
• Gimbal mode: best used with up to
3 telescopic rods extended (within
50cm)
• Selie stick mode: best used with up
to 5 telescopic rods extended (within
70cm)
• CAUTION: No pars of the Selie
Gimbal are user serviceable. Do not
disassemble any par of the remote
Repair and Refurbished Goods or
Parts Notice
AFTER SALES SUPPORT
1300 663 907
AUS
YEAR WARRANTY
1
SELFIE GIMBAL
[e-mail]
Unfortunately, from time to time, faulty products are
manufactured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining
user-generated data (such asles stored on a computer
hard drive, telephone numbers stored on a mobile
telephone, songs stored on a portable media player, games
saved on a games console or les stored on a USB memory
stick) during the process of repair, some or all of your stored
data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing goods,
we may replace them withrefurbished goods of the same
type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on1300 663 907 or write to us at:
Balco Brands Pty Ltd
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[e-mail]
MODEL: HE210254
PRODUCT CODE: XXX 12/2021
The product is guaranteed to be free from defects
in workmanship and parts for a period of 12
months from the date of purchase. Defects that
occur within this warranty period, under normal
use and care, will be repaired, replaced or
refunded at our discretion. The benets conferred
by this warranty are in addition to all rights and
remedies in respect of the product that the
consumer has under the Competition and
Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage.You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
REGISTER YOUR PURCHASE AT
www.aldi.com.au/en/about-aldi/product-registration/TO KEEP
UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Warranty Details
SELFIE GIMBAL
Usage Usage Usage

How to use the gimbal
1. Ensure that the phone cradle is not
locked, open clasp and place your
phone in the cradle and make sure that
your phone is in the centre
2. Aer clamping the phone and keeping
the phone in a neutral position, press
and hold the gimbal power button for 5
seconds to star up
a. The stabiliser will activate and
conigure itself
3. The gimbal can be used with the
extension pole either retracted or
extended (Best used with up to 3
telescopic rods extended (within
50cm))
4. Press and hold for 3 seconds to shut
down
Changing the orientation of the
phone in gimbal mode
1. Click the gimbal power
button once to rotate the
phone cradle clockwise
or double click to rotate
counter-clockwise
NOTE:
• Ensure the cradle is not
in the lock position before
using the gimbal.
• Do not force the gimbal
into into position. It will
automatically rotate for you
when you press the power
button.
How to open the tripod
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. At the handle, open the legs outwards
to their maximum for stability
5.
NOTE:
• Please ensure that the middle pole
is touching the ground to help with
stabilisation.
• We do not recommend extending the pole
height past the warning label as this could
cause the tripod to become unstable.
How to use as a selie stick
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. Extend pole
NOTE:
• You can change the direction of the phone
cradle if needed by unlocking the phone
cradle and manually moving it.
• DO NOT move the phone cradle when it
is locked as this can damage or break
the lock.
Reminder
• The selie gimbal is compatible with
Android 4.2.2, Android devices and iOS
5.0 or above on iPhone
• When using the phone clamp please
ensure that the phone is presses
against the back of the phone clamp
• Gimbal mode: best used with up to
3 telescopic rods extended (within
50cm)
• Selie stick mode: best used with up
to 5 telescopic rods extended (within
70cm)
• CAUTION: No pars of the Selie
Gimbal are user serviceable. Do not
disassemble any par of the remote
Repair and Refurbished Goods or
Parts Notice
AFTER SALES SUPPORT
1300 663 907
AUS
YEAR WARRANTY
1
SELFIE GIMBAL
[e-mail]
Unfortunately, from time to time, faulty products are
manufactured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining
user-generated data (such asles stored on a computer
hard drive, telephone numbers stored on a mobile
telephone, songs stored on a portable media player, games
saved on a games console or les stored on a USB memory
stick) during the process of repair, some or all of your stored
data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing goods,
we may replace them withrefurbished goods of the same
type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on1300 663 907 or write to us at:
Balco Brands Pty Ltd
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[e-mail]
MODEL: HE210254
PRODUCT CODE: XXX 12/2021
The product is guaranteed to be free from defects
in workmanship and parts for a period of 12
months from the date of purchase. Defects that
occur within this warranty period, under normal
use and care, will be repaired, replaced or
refunded at our discretion. The benets conferred
by this warranty are in addition to all rights and
remedies in respect of the product that the
consumer has under the Competition and
Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage.You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
REGISTER YOUR PURCHASE AT
www.aldi.com.au/en/about-aldi/product-registration/TO KEEP
UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Warranty Details
SELFIE GIMBAL
Usage Usage Usage

How to use the gimbal
1. Ensure that the phone cradle is not
locked, open clasp and place your
phone in the cradle and make sure that
your phone is in the centre
2. Aer clamping the phone and keeping
the phone in a neutral position, press
and hold the gimbal power button for 5
seconds to star up
a. The stabiliser will activate and
conigure itself
3. The gimbal can be used with the
extension pole either retracted or
extended (Best used with up to 3
telescopic rods extended (within
50cm))
4. Press and hold for 3 seconds to shut
down
Changing the orientation of the
phone in gimbal mode
1. Click the gimbal power
button once to rotate the
phone cradle clockwise
or double click to rotate
counter-clockwise
NOTE:
• Ensure the cradle is not
in the lock position before
using the gimbal.
• Do not force the gimbal
into into position. It will
automatically rotate for you
when you press the power
button.
How to open the tripod
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. At the handle, open the legs outwards
to their maximum for stability
5.
NOTE:
• Please ensure that the middle pole
is touching the ground to help with
stabilisation.
• We do not recommend extending the pole
height past the warning label as this could
cause the tripod to become unstable.
How to use as a selie stick
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. Extend pole
NOTE:
• You can change the direction of the phone
cradle if needed by unlocking the phone
cradle and manually moving it.
• DO NOT move the phone cradle when it
is locked as this can damage or break
the lock.
Reminder
• The selie gimbal is compatible with
Android 4.2.2, Android devices and iOS
5.0 or above on iPhone
• When using the phone clamp please
ensure that the phone is presses
against the back of the phone clamp
• Gimbal mode: best used with up to
3 telescopic rods extended (within
50cm)
• Selie stick mode: best used with up
to 5 telescopic rods extended (within
70cm)
• CAUTION: No pars of the Selie
Gimbal are user serviceable. Do not
disassemble any par of the remote
Repair and Refurbished Goods or
Parts Notice
AFTER SALES SUPPORT
1300 663 907
AUS
YEAR WARRANTY
1
SELFIE GIMBAL
[e-mail]
Unfortunately, from time to time, faulty products are
manufactured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining
user-generated data (such asles stored on a computer
hard drive, telephone numbers stored on a mobile
telephone, songs stored on a portable media player, games
saved on a games console or les stored on a USB memory
stick) during the process of repair, some or all of your stored
data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing goods,
we may replace them withrefurbished goods of the same
type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on1300 663 907 or write to us at:
Balco Brands Pty Ltd
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[e-mail]
MODEL: HE210254
PRODUCT CODE: XXX 12/2021
The product is guaranteed to be free from defects
in workmanship and parts for a period of 12
months from the date of purchase. Defects that
occur within this warranty period, under normal
use and care, will be repaired, replaced or
refunded at our discretion. The benets conferred
by this warranty are in addition to all rights and
remedies in respect of the product that the
consumer has under the Competition and
Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage.You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
REGISTER YOUR PURCHASE AT
www.aldi.com.au/en/about-aldi/product-registration/TO KEEP
UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Warranty Details
SELFIE GIMBAL
Usage Usage Usage

How to use the gimbal
1. Ensure that the phone cradle is not
locked, open clasp and place your
phone in the cradle and make sure that
your phone is in the centre
2. Aer clamping the phone and keeping
the phone in a neutral position, press
and hold the gimbal power button for 5
seconds to star up
a. The stabiliser will activate and
conigure itself
3. The gimbal can be used with the
extension pole either retracted or
extended (Best used with up to 3
telescopic rods extended (within
50cm))
4. Press and hold for 3 seconds to shut
down
Changing the orientation of the
phone in gimbal mode
1. Click the gimbal power
button once to rotate the
phone cradle clockwise
or double click to rotate
counter-clockwise
NOTE:
• Ensure the cradle is not
in the lock position before
using the gimbal.
• Do not force the gimbal
into into position. It will
automatically rotate for you
when you press the power
button.
How to open the tripod
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. At the handle, open the legs outwards
to their maximum for stability
5.
NOTE:
• Please ensure that the middle pole
is touching the ground to help with
stabilisation.
• We do not recommend extending the pole
height past the warning label as this could
cause the tripod to become unstable.
How to use as a selie stick
When the gimbal mode is turned of:
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
3. Lock the cradle
4. Extend pole
NOTE:
• You can change the direction of the phone
cradle if needed by unlocking the phone
cradle and manually moving it.
• DO NOT move the phone cradle when it
is locked as this can damage or break
the lock.
Reminder
• The selie gimbal is compatible with
Android 4.2.2, Android devices and iOS
5.0 or above on iPhone
• When using the phone clamp please
ensure that the phone is presses
against the back of the phone clamp
• Gimbal mode: best used with up to
3 telescopic rods extended (within
50cm)
• Selie stick mode: best used with up
to 5 telescopic rods extended (within
70cm)
• CAUTION: No pars of the Selie
Gimbal are user serviceable. Do not
disassemble any par of the remote
Repair and Refurbished Goods or
Parts Notice
AFTER SALES SUPPORT
1300 663 907
AUS
YEAR WARRANTY
1
SELFIE GIMBAL
[e-mail]
Unfortunately, from time to time, faulty products are
manufactured which need to be returned to the Supplier
for repair.
Please be aware that if your product is capable of retaining
user-generated data (such asles stored on a computer
hard drive, telephone numbers stored on a mobile
telephone, songs stored on a portable media player, games
saved on a games console or les stored on a USB memory
stick) during the process of repair, some or all of your stored
data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing goods,
we may replace them withrefurbished goods of the same
type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on1300 663 907 or write to us at:
Balco Brands Pty Ltd
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[email protected]om
MODEL: HE210254
PRODUCT CODE: XXX 12/2021
The product is guaranteed to be free from defects
in workmanship and parts for a period of 12
months from the date of purchase. Defects that
occur within this warranty period, under normal
use and care, will be repaired, replaced or
refunded at our discretion. The benets conferred
by this warranty are in addition to all rights and
remedies in respect of the product that the
consumer has under the Competition and
Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage.You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
REGISTER YOUR PURCHASE AT
www.aldi.com.au/en/about-aldi/product-registration/TO KEEP
UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Warranty Details
SELFIE GIMBAL
Usage Usage Usage