Baumatic BHI650 User manual

BHI650
60cm Induction hob
BHI750
70cm Induction hob

Dear Customer,
Congratulations on purchasing your new product from Think Appliances.
To register your parts and labour warranty (some conditions apply please refer to your
warranty card for more details) please contact out Customer Care team on:
1800 444 357
Our Customer Care centre is there to ensure you get the most out of your appliance. For
example, should you want to learn more about recommended cooking temperatures, the
various cooking functions available, how to set and program your LED clock, and importantly
taking care of your appliance when cleaning, please call us because we are here to help you.
It is important that you read through the following use and care manual thoroughly to
familiarize yourself with the installation and operation requirements of your appliance to
ensure optimum performance.
We also carry a complete range of spare parts for all Think products. For all your spare parts
enquiries please contact our team at Pronto Parts on:
1300 306 973
Again, thank you for choosing an appliance brought to you by Think Appliances and we look
forward to being of service to you.
Kind regards
Management
Think Appliances

2
User Manual for your Baumatic
60/70 cm Induction hob with slider
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
BHI650/BHI750

3
Contents
Environmental note 4
Important safety information 5 – 8
Specifications 9 – 11
Product and aperture dimensions 9
Product specifications 9
Electrical details 10
Ceramic hob surface layout 10
Control panel layout 11
Using the ceramic hob 11 - 22
Before first use 11
Touch controls 12
Switching the hob on 12
Switching on a zone and setting a power level 13 – 14
Power levels 14
Switching off a zone 14 - 15
Switching the hob off 15
Residual heat indicator 15
Pan sensor 15 - 16
Cookware that is suitable for an induction hob 16
The boost function 16 - 17
The hob timer (minute minder) 17 – 18
The hob timer (linked to a cooking zone) 18 – 20
Cancelling a timer function 20
Locking the hob top 20 - 21
Safety cut-off 21
High temperature protection 21
Hob guidelines 21 - 22
Cleaning and maintenance 22 - 24
Cleaning the ceramic hob top 22 - 23
After each use 23
Cleaning table 23
Using a ceramic hob scraper 23 - 24
Using a specialist ceramic hob cleaner 24
Installation 24 - 30
Positioning 24 - 25
Unpacking the appliance 25
Installing the appliance 26– 27
Electrical connection 27 - 28
Connecting the mains supply cable 28
Replacing the mains supply cable 29
My appliance isn’t working correctly 29 - 31
Error codes 30 - 31
31
Contactdetails

4
Environmental note
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
oPlease discard all packaging material with due regard for the
environment.

5
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Service Department.
General Information
oThis appliance is designed for domestic household use and for
the cooking and frying of domestic foodstuffs.
oIMPORTANT: The adjacent furniture and all materials used in
the installation must be able to withstand a minimum
temperature of 85°C above the ambient temperature of the
room it is located in, whilst in use.
oCertain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
oAny damage caused by the appliance being installed in
contravention of this temperature limit, will be the liability of
the owner.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in the Conditions Of Guarantee. The foregoing does not
affect your statutory rights.
oThe use of this appliance for any other purpose or in any other
environment without the express agreement of Baumatic Ltd.
will invalidate any warranty or liability claim.
oYou should not use this appliance to store items on or as a work
surface.
oNo modifications to the appliance are permitted by Baumatic Ltd.
oYou should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be kept away
from the appliance, as they may fuse to the surface.
oRepairs may only be carried out by registered service
engineers or their authorised service agent.

6
Child Safety
oBaumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the appliance at any time. During and after use, all
surfaces will be hot.
oIf it is necessary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
oOlder children should only be allowed to utilise the appliance
when supervised.
General Safety
oThe appliance should only be installed and connected by a
suitably qualified person.
oCare should be taken to ensure that the units and work surfaces
that you build the appliance into, meet with the relevant
standards.
oIf you notice any scratches, splits or cracks in the ceramic glass,
you should immediately switch off the appliance and disconnect
it from your mains supply. Otherwise there is the risk of electric
shock occurring.
During use
oAny film or stickers that are present on the hob surface when it
is delivered should be removed before use.
oCare should be taken when utilising the appliance, otherwise
there is a risk of burns being caused.
oYou should not allow the electrical connection cables to come
into contact with the hob surface when it is hot or any hot
cookware.
oIf fat and oil overheats, then it can ignite extremely quickly. For
this reason, when cooking with fat and oil the appliance should
not be left unattended.
oMake sure that all of the cooking zones are switched off after
use.

7
oIMPORTANT: This ceramic induction hob fully complies
with current legislation regarding electro-magnetic
interference and is designed not to interfere with other
electronic appliances providing these comply with the
same legislation.
oAs the hob generates magnetic fields in its immediate
vicinity, pacemakers and active heart implants must be
designed to comply with relevant regulations. If in doubt,
you should consult the manufacturer of your device or
your doctor. In this respect, Baumatic can only guarantee
the conformity of our own product.
oIf an object made of metal, (e.g. saucepan lid, knife, fork
or spoon) is placed on a cooking zone that is switched on,
it can get hot.
Cleaning
oCleaning of the hob should be carried out on a regular basis.
oIMPORTANT: Before attempting to clean the appliance, it
should be disconnected from the mains and allowed to cool.
oGreat care should be taken whilst using this appliance and when
following the cleaning procedure.
oYou should not use a steam jet or any other high pressure
cleaning equipment to clean the appliance.
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions. Please see
the specific section of this booklet that refers to
installation.
Baumatic Ltd. declines any responsibility for injury or damage,
to person or property, as a result of improper use or incorrect
installation of this appliance.

8
Declaration of conformity
This appliance complies with the following European Directives:
-2006/95/CE General regulations / Low tension
-1935/2004/CE 90/128/EEC This appliance is suitable to come in
contact with food
-2004/108/CE Electromagnetic compatibility
oThe manufacturer declares that the hob is built using certified
materials and requires the appliance to be installed in
accordance with the standards currently in force. This appliance
must be used by a trained person for domestic purposes only.
To avoid damaging your appliance
oThe ceramic glass can be damaged by objects falling onto it.
oThe ceramic glass edge can be damaged by knocks from
cookware.
oCast iron and cast aluminium cookware with damaged bases
may scratch the ceramic surface if they are dragged across it.
oPans should be lifted on and off the hob surface and not
dragged.
oCooking zones should not be switched on without cookware
placed on it. Also the cookware should not be empty.
oFood or liquid that has high sugar content may damage the hob
top, if it comes into contact with the ceramic hob surface. Any
spillages should be wiped up immediately, however this may not
prevent the hob surface from becoming damaged.

9
Specifications
Product dimensions: Aperture dimensions:
Product specifications:
o1 x 2.30 kW induction zones with booster (2.60 kW) Ø 220 mm
o1 x 1.20 kW induction zones with booster (1.50 kW) Ø 140 mm
o Front touch slider control operation
o Safety lock
o 4 individual residual heat indicators
o 4 independent induction generators
o Electronic timer
o Pan compatibility detection
o Bevelled edges
Standard accessories
oCeramic hob scraper
565
495
Depth: 520 mm Depth: 495 mm
Width: 590/700 Width: 565 mm
mm
Height: 56.5 mm Height: 106.5 mm
590/700
o1 x 2.30 kW induction zones with booster (2.60 kW) Ø 200 mm
o1 x 1.20 kW induction zones with booster (1.50 kW) Ø 160 mm

10
Electrical details
Rated Voltage: 220 - 240 Vac 50 /60 Hz
Supply Connection: 30 A (double pole switched fused
outlet with 3mm contact gap)
Max Rated Inputs: 7.0 kW
Mains Supply Lead: 3 core x 6 mm² (not supplied)
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your hob is located on
the underneath of the appliance. Therefore it is a good idea to record
this information before you install your appliance.
Model Number ……………………………….
Serial Number ……………………………….
Date of Purchase ……………………………….
Ceramic hob surface layout
1) 1.20 kW induction zone with booster (1.50 kW) Ø 140 mm
2) 2.30 kW induction zone with booster (2.60 kW) Ø 220 mm
3) 1.20 kW induction zone with booster (1.50 kW) Ø 160 mm
4) 2.30 kW induction zone with booster (2.60 kW) Ø 200 mm
5) Control panel
6) Hob surface
1
23
4
6
5

11
Control panel layout
1) Cooking zone selection buttons
2) Timer button
3) Slider control
4) Booster button
5) Safety lock button
6) ON/OFF button
Using the ceramic hob
Before first use
IMPORTANT: You should clean the ceramic hob surface (see
“Cleaning and maintenance” section).
oYou should switch on one cooking zone at a time for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
oDo not burn off more than one zone at once.
oYou must place a saucepan filled half full with cold water on
each zone as you burn it off. Otherwise the induction zone will
not operate.
1
23456

12
Touch controls
oAll operations are performed by means of the touch controls that
can be found on the control panel.
oThe controls respond to touch so you do not need to add any
pressure.
oYou should use the ball of your finger not the tip when using the
controls.
oA beep will sound each time a touch is registered.
oYou should ensure that the controls are kept clean, dry and that
no objects such as utensils or cloths cover them. Even a thin film
of water may make the controls difficult to operate.
Switching the hob on
oWhen the hob is connected to a power supply, an audible signal
will sound. All of the cooking zone indicators will show “-”. The
hob has now entered stand-by mode.
oPress the ON/OFF button.

13
Switching on a zone and setting a power level
IMPORTANT: A zone must be selected within 1 minute of turning the
hob on.
oMake sure that the bottom of the pan and
the surface of the hob are clean and dry
before placing a suitable pan on the
cooking zone that you wish to use.
oPress the cooking zone selection button of
the cooking zone that you want to use. An
indicator next to the relevant button will
flash.
oSelect the power level for the cooking
zone that you have selected using the
slider control. If you do not choose a
heat setting within 1 minute of turning
the hob on, the hob will switch off
automatically.
oSliding the slider control to the right
will increase the power level while
sliding the slider control to the left will
decrease the power level. The power
level will show in the relevant display.
oYou can alter the power level at any time during cooking using
the slider control.
If the display flashes with the symbol shown opposite,
alternatively with the heat setting, this means that:
•You have not placed a pan on the correct cooking zone or,
•The pan you are using is not suitable for induction cooking or,
•The pan is too small or not properly centred on the cooking
zone.

14
oNo heating will take place unless there is a suitable pan on the
cooking zone. The display will automatically turn off after 2
minutes if no suitable pan is placed on it.
Power levels
oFor a general guide to cooking various foods at the different
power levels please refer to the table below.
oPlease note that this table should be viewed as a guide only and
that other factors such as cookware, weight and amount of food
and personal preference will all influence the power level
required.
Power
Level
Recommended Use
1 - 2 oDelicate warming of small amounts of food.
oMelting chocolate, butter and foods that burn
quickly.
oGentle simmering.
oSlow warming.
3 - 4 oReheating.
oRapid simmering.
oCooking rice.
5 - 6 oCooking pancakes.
7 - 8 oSautéing.
oCooking pasta.
9 oStir-frying.
oSearing.
oBringing soup to the boil.
oBoiling water.
Switching off a zone
oPress the cooking zone selection button of
the cooking zone that you want to switch off.
oSlide the slider control to the left to decrease
the power level until it reaches the lowest
position. The display should show power level
“0”.
oAfter a few seconds, the cooking zone will
switch off.

15
oAn “H” symbol will show in the cooking zone
indicator until the surface has cooled down to a
safe temperature (see the section on the
“residual heat indicator” for further information).
Switching the hob off
Once you have switched off all of the cooking zones, you should switch
the hob off.
oPress the ON/OFF button.
oIt is possible to turn the hob off at any time by
pressing the ON/OFF button.
Residual heat indicator
oAfter a zone is switched off, the corresponding
cooking zone indicator will show a letter “H”. This
means that the temperature of the zone is over
60°C and is therefore still high enough to cause
injury.
oIMPORTANT: The residual heat indicator will disappear if your
mains supply is cut. Care should be taken in case the surface
temperature is still high.
Pan sensor
Each zone has a sensor on it, so it can detect the presence of a pan.
oThe sensor is fine-tuned to detect a pan being placed on it. The
pan should be one size smaller than the nominal diameter of the
zone.
oIf after placing a pan on a cooking zone and
selecting that cooking zone, a “U” shaped symbol
appears on the cooking zone indicator, this means
that the pan is either the incorrect size or shape.
Or it could be made from a material that is inappropriate for use
on an induction zone hob.
oIf a cooking zone is selected but no pan is detected, the pan
sensor system will check for the presence of a pan

16
approximately every few seconds. If no pan is detected after 2
minutes the hob will automatically switch off
oYou should check that your pans are suitable for use on an
induction zone hob (see the pan manufacturer’s trademark or
instructions).
Cookware that is suitable for an induction hob
The table below shows cookware that is normally suitable for use on
an induction zone hob:-
Cookware Suitable
Steel, enamelled steel Yes
Cast iron Yes
Stainless steel Yes (if stated by the pan
manufacturer)
Aluminium, copper, brass No
Glass, ceramic, porcelain No
oThe bottom of the pans should be as flat and thick as possible.
oCertain types of cookware may result in a noise being made
when being used on an induction zone hob. This does not mean
that there is an appliance fault.
oIMPORTANT: You should make sure that all pans are placed in
the centre of the induction zone that you are using.
The boost function
To obtain a faster and more powerful heating speed, the booster
function can be used for any cooking zone.
oPress the cooking zone selection button of the
zone you wish to use.
oThen press the booster button. The relevant cooking zone
indicator will show “b” to indicate that the function has been
activated.

oThe boost function will operate the chosen cooking zone at
maximum power for 5 minutes. After this time, the cooking zone
will return to its original power setting.
oThe booster function can be used on every cooking zone.
The hob timer (minute minder)
Your hob has a timer which will countdown a period of time between 1
and 99 minutes. At the end of the countdown period an audible signal
will sound. oPress the ON/OFF button to turn the hob on. You
can use the minute minder even if you are not
selecting a cooking zone.
oPress the timer button to enter the minute
minder setting mode. The timer indicator will
show the default countdown time of “10”
minutes and the “0” digit will flash.
oSet the required countdown time (minutes) using the slider
control. As you slide the control to the right the time will
increase in 1 minute intervals. As you slide the control to the left
the time will decrease in 1 minute intervals.
oPress the timer button again and the
“1” digit will flash.
oSet the required countdown time
using the slider control. As you slide
the control to the right the time will increase in 10 minutes
intervals. As you slide the control to the left the time will
decrease in 10 minute intervals.
17

18
oWhen the required countdown time is shown in the display,
release all controls. The display will show the remaining time
before the countdown begins automatically.
oWhen the set countdown time has elapsed an
alarm will sound for 30 seconds and the timer
indicator will show “- -”.
The hob timer (linked to a cooking zone)
You are able to link a countdown time to a cooking zone so that when
the countdown time has elapsed the cooking zone will beep once
and switch off automatically.
oPress the ON/OFF button to turn the hob on.
oPress the cooking zone selection button of the
cooking zone that you want to use and place a
suitable pan on the selected cooking zone.
oSelect the power level for the cooking
zone that you have selected, using the
slider control.
oPress the timer button to enter the
countdown setting mode. The timer indicator
will show the default countdown time of “10”
minutes and the “0” digit will flash.
oSet the required countdown time (minutes) using the slider
control. As you slide the control to the right the time will
increase in 1 minute intervals. As you slide the control to the left
the time will decrease in 1 minute intervals.

19
oPress the timer button again and the “1”
digit will flash.
oSet the required countdown time using the slider control. As you
slide the control to the right the time will increase in 10 minutes
intervals. As you slide the control to the left the time will
decrease in 10 minute intervals.
oWhen the required countdown time is shown in the display,
release all controls. The display will show the remaining time
before the countdown begins automatically.
oA red dot will appear next to the power level
indicator of the relevant zone. When you set a
countdown time for several zones
simultaneously, a red dot will appear in all the relevant zone
indicators. The timer display will show the minimum countdown
and the corresponding red dot will flash.
oWhen the set countdown time has elapsed, the
relevant cooking zone will beep once
and switch off automatically. If countdown timers
for other cooking zones are set, the timer display will then show the
new minimum countdown and the corresponding red dot will flash.