Baumatic Studio Solari AS26SS User manual

el 1
AS26SS/B26SS/B40/
B70.1BL/B71TCBL/
B72BL/B72TCBL/W/
B77BL/B77TCBL/B78BL/
PHG60
2 Gas hobs

User Manual for your Baumatic
AS26SS 90 cm 4 Burner gas glass hob with thermocouples
B26SS 90 cm 4 Burner gas glass hob with thermocouples
B40 Circular Ø 52 cm Frameless glass gas hob
B70.1BL 60 cm 4 Burner gas glass hob
B71TCBL 60 cm 4 burner gas glass hob with
thermocouples
B72BL 60 cm 4 burner gas glass hob
B72TCBL/W 60 cm 4 burner gas glass hob with
thermocouples
B77BL 70 cm 5 burner gas glass hob
B77TCBL 70 cm 5 burner gas glass hob with
thermocouples
B78BL 70 cm 5 Burner gas glass hob with thermocouples
PHG602 60 cm 4 burner gas glass hob with thermocouples
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
2
DD 08/01/10

3
Contents
Environmental note 4
Important safety information 5 – 7
Specifications 8 – 20
AS26SS/B26SS 8
B40 9
B70.1BL 10
B71TCBL 11
B72BL 12
B72TCBL/W 13
B77BL 14
B77TCBL 15
B78BL 16
PHG602 17
Electricaldetails 18
Gasdetails 18
Gas hob surface layout 18 - 20
Using the gas hob 20 - 22
Beforefirstuse 20
Switching the hob on 20 - 21
Automatic ignition (B70.1BL, B72BL, B77BL) 21
Automatic ignition with flame failure safety device 21 - 22
(AS26SS, B26SS, B40, B71TCBL, B72TCBL/W,
B77TCBL, B78BL, PHG602)
Energysavingtips 22
Cleaning 23 - 24
Cleaning the hob top 23
Aftereachuse 23
Cleaning the hob burners 23 - 24
Maintaining the cast iron pan stands 24
Installation 24 - 36
Positioning 25-26
Unpacking the appliance 26
Installing the appliance 26 – 29
Gas connection 29
Ventilationrequirements 29-30
Gas Safety (Installation and Use) Regulations 30 – 31
Gas Safety (Installation and Use) Regulations (B40 only) 31 - 32
Gas Adjustment (Conversion to LPG) 32 - 33
Minimum flow adjustment for hob gas taps 34
Gas tap maintenance 35 - 36
Electricalconnection 36
Replacing the mains supply cable 36
My appliance isn’t working correctly 37
Contactdetails 38

Environmental note
4
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
all packaging material with due regard for the
environment.
oPlease discard

5
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
ooklet, please contact the Baumatic Advice Line.
ehold use and for
ambient temperature of the
scolouration at
of this temperature limit, will be the liability of
Guarantee. The foregoing does not
t of Baumatic Ltd.
ld not use this appliance to store items on or as a work
kept away
atic service
b
General Information
This appliance is designed for domestic houso
the cooking and frying of domestic foodstuffs.
oIMPORTANT: The adjacent furniture and all materials used in
the installation must be able to withstand a minimum
temperature of 85°C above the
room it is located in, whilst in use.
oCertain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or di
temperatures below the guidelines given above.
oAny damage caused by the appliance being installed in
contravention
the owner.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of
affect your statutory rights.
oThe use of this appliance for any other purpose or in any other
environment without the express agreemen
will invalidate any warranty or liability claim.
oYou shou
surface.
oNo modifications to the appliance are permitted by Baumatic Ltd.
oYou should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be
from the appliance, as they may fuse to the surface.
oRepairs may only be carried out by Baum
engineers or their authorised service agent.

6
hild Safety
ce at any time. During and after use, all
surfaces will be hot.
se ensure that they are kept under close supervision
at all times.
uld only be allowed to utilise the appliance
when supervised.
eneral Safety
e installed and connected by a
GASSAFE registered installer.
uild the appliance into, meet with the relevant
standards.
uring use
hob surface when it
is delivered should be removed before use.
the appliance, otherwise
there is a risk of burns being caused.
t with the hob surface when it is hot or any hot
cookware.
ng with fat and oil the appliance should
not be left unattended.
sure that all of the cooking zones are switched off after
use.
C
oBaumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the applian
oIf it is necessary for younger family members to be in the
kitchen, plea
oOlder children sho
G
oThe appliance should only b
oCare should be taken to ensure that the units and work surfaces
that you b
D
oAny film or stickers that are present on the
oCare should be used when utilising
oYou should not allow the electrical connection cables to come
into contac
oIf fat and oil overheats, then it can ignite extremely quickly. For
this reason, when cooki
oMake

7
leaning
Cleaning of the hob should be carried out on a regular basis.
appliance, it
should be disconnected from the mains and cool.
using this appliance and when
following the cleaning procedure.
other high pressure
cleaning equipment to clean the appliance.
ion of this booklet that refers to
installation.
a result of improper
use or installation of this appliance.
ion
Vehicle, the requirements of N 721 MUST be followed.
t this appliance is
installed on any type of marine vessel.
eclaration of conformity
This appliance complies with the following European Directives:
89 EMC Directive inclusive of
92 Materials that can touch food.
N60335-1, EN60335-2, EN301-1 Safety Standards.
liance must be used by a
ained person for domestic purposes only.
C
o
oIMPORTANT: Before attempting to clean the
oGreat care should be taken whilst
oYou should not use a steam jet or any
Installation
This appliance must be correctly installed by a
GASSAFE registered installer, strictly in
accordance with the manufacturer’s instructions
and the relevant British Standards. Please see the
specific sect
oBaumatic Ltd. declines any responsibility for injury or
damage, to person or property, as
oIf the appliance is being used in a Leisure Accommodat
oBaumatic Ltd. DO NOT recommend tha
D
-73/23/EEC dated 19/02/1973 Low Voltage Directive.
-89/336/EEC dated 03/05/19
Amending Directive 92/31/EEC.
-93/68/EEC dated 22/07/1993 CE Marking Directive.
-89/109/EEC dated 25/01/19
-90/396/EEC Gas Products.
-E
The manufacturer declares that the hob is built using certified
materials and requires the appliance to be installed in accordance with
the standards currently in force. This app
tr

8
pecificationsS
AS26SS/B26SS
Product dimensions: Aperture dimensions:
Height: 350 mm Height: 335 mm
Width: 880 mm Width: 865 mm
rs
on each burner
n stands
oLPG conversion jets
Depth: 50 mm
Product specifications:
o1 x 3.50 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o1 x 1.00 kW auxiliary burner
oFront control operation
Automatic ignitiono
oWrap around designer frame
oFlame failure safety device
oRANA cast iron pa
Standard accessories:

9
40
idth: 520 mm Width: 500 mm
burner
o1 x 3.00 kW rapid burner
burner
Flame failure safety device on each burner
oIMPORTANT: Not suitable for installation above built-
to the location of the gas inlet.
oLPG conversion jets
B
Product dimensions: Aperture dimensions:
W
Height: 50 mm
Product specifications:
o1 x 3.50 kW triple crown (wok)
o1 x 1.75 kW semi-rapid
oFront control operation
oAutomatic ignition
o
oRANA design cast iron pan stands
under ovens due
Standard accessories:

B70.1BL
10
Depth: 480 mm
idth: 580 mm Width: 560 mm
2 x 1.75 kW semi-rapid burners
urner
Automatic ignition
n stands
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
Product specifications:
o1 x 3.00 kW rapid burner
o
o1 x 1.00 kW auxiliary b
oSide control operation
o
oRANA cast iron pa
Standard accessories:

B71TCBL
11
Depth: 480 mm
idth: 580 mm Width: 560 mm
2 x 1.75 kW semi-rapid burners
urner
Flame failure safety device on each burner
n stands
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
Product specifications:
o1 x 3.00 kW rapid burner
o
o1 x 1.00 kW auxiliary b
oSide control operation
oAutomatic ignition
o
oRANA cast iron pa
Standard accessories:

12
B72BL
Depth: 490 mm
idth: 580 mm Width: 560 mm
2 x 1.75 kW semi-rapid burners
rner
Automatic ignition
n stands
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
o1 x 3.50 kW wok burner
o
o1 x 1.00 kW auxiliary bu
oFront control operation
o
oRANA cast iron pa
Standard accessories:

B72TCBL/W
13
Depth: 490 mm
idth: 580 mm Width: 560 mm
2 x 1.75 kW semi-rapid burners
rner
Flame failure safety device on each burner
n stands
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
o1 x 3.50 kW wok burner
o
o1 x 1.00 kW auxiliary bu
oFront control operation
oAutomatic ignition
o
oRANA cast iron pa
Standard accessories:

14
B77BL
Depth: 490 mm
idth: 680 mm Width: 562 mm
2 x 1.75 kW semi-rapid burners
rner
Automatic ignition
n stands
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o
o1 x 1.00 kW auxiliary bu
oFront control operation
o
oRANA cast iron pa
Standard accessories:

B77TCBL
15
Depth: 490 mm
idth: 680 mm Width: 562 mm
2 x 1.75 kW semi-rapid burners
rner
oFlame failure safety device on each burner
n stands
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o
o1 x 1.00 kW auxiliary bu
oFront control operation
oAutomatic ignition
oRANA cast iron pa
Standard accessories:

16
B78BL
Depth: 490 mm
idth: 680 mm Width: 562 mm
2 x 1.75 kW semi-rapid burners
rner
RANA cast iron pan stands
lass with bevelled front edge
oLPG conversion jets
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o
o1 x 1.00 kW auxiliary bu
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
o
oTextured mirror g
Standard accessories:

17
HG60
Depth: 490 mm
idth: 580 mm Width: 560 mm
2 x 1.75 kW semi-rapid burners
rner
re safety device on each burner
RANA cast iron pan stands
oLPG conversion jets
P 2
Product dimensions: Aperture dimensions:
Depth: 510 mm
W
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o
o1 x 1.00 kW auxiliary bu
oFront control operation
oAutomatic ignition
oFlame failu
o
oFrameless
Standard accessories:

Electrical details
18
Rated Voltage:
t with
ax Rated Inputs: 0.008 to 0.02 kW (depending on model)
ains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked)
Alternative LPG G30 (28-30 mbar),
ur hob is located on
e underneath of the appliance. Therefore it is a good idea to record
pliance.
ate of Purchase ……………………………….
layout
r
er
= 1.00 kW auxiliary burner
= Control panel
230 Vac 50 Hz
Supply Connection: 3 A (double pole switched fused outle
3mm contact gap)
M
M
Gas details
Connection: Rp ½ (ISO R7)
Type: Natural Gas (20.9 mbar),
Town gas G110 – 120 (8 mbar) to order.
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of yo
th
this information before you install your ap
Model Number ……………………………….
Serial Number ……………………………….
D
Gas hob surface
AS26SS/B26SS
A = 1.75 kW semi-rapid burne
B = 3.50 kW wok burn
C
D

B40
19
3.00 kW rapid burner
urner
= Control panel
70.1BL/B71TCB
72BL/B72TCBL/
A = 3.50 kW wok burner
B =
C = 1.75 kW semi-rapid
b
D
B L
B W/PHG602

20
77BL/B77TCBL/
hob
B B78BL
Using the gas
Before
MPORTANT: You should clean the hob surface (see
“Cleaning and maintenance” section).
he following symbols will appear on the control panel, next to each
arge flame: maximum setting
Small flame: minimum setting
oThe minimum setting is at the end of the anti-clockwise rotation
oAll operation positions must be selected between the maximum
oNever select a knob position between the maximum and off
first use
I
Switching the hob on
T
control knob:
0 = gas off
L
of the control knob.
and minimum position.
position.