Baumatic B46.1SS User manual

el 1
B46.1SS/B46.1TCSS/B60.3SS/
BT61.1SS/BT62.1SS/
BT62.1TCSS/BG67.1SS/
B68.1SS/B68.1TCSS/B17.8SS
Gas hobs

User Manual for your Baumatic
B46.1SS 60 cm 4 Burner gas hob
B46.1TCSS 60 cm 4 Burner gas hob with thermocouples
B60.3SS 60 cm 4 Burner gas hob with thermocouples
BT61.1SS 60 cm 4 Burner gas hob with thermocouples
BT62.1SS 60 cm 4 Burner gas hob
BT62.1TCSS 60 cm 4 Burner gas hob with thermocouples
BG67.1SS 70 cm 5 Burner gas hob with thermocouples
B68.1SS 70 cm 5 Burner gas hob
B68.1TCSS 70 cm 5 burner gas hob with thermocouples
B17.8SS 90 cm 5 burner gas hob with thermocouples
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
DD 27/01/10
2

3
Contents
Environmental note 4
Important safety information 5 – 7
Specifications 8 – 17
B46.1SS/B46.1TCSS 8
B60.3SS 9
BT61.1SS 10
BT62.1SS/BT62.1TCSS 11
BG67.1SS 12
B68.1SS/B68.1TCSS 13
B17.8SS 14
Electricaldetails 15
Gasdetails 15
Gas hob surface layout 15 - 17
Using the gas hob 17 - 20
Beforefirstuse 17
Switchingthehobon 17–18
Pushbutton ignition (B46.1SS) 18
Pushbutton ignition with flame failure device 18 - 19
(B46.1TCSS/B60.3SS/BT61.1SS)
Automatic ignition (B68.1SS/BT62.1SS) 19
Automatic ignition with flame failure device 19 – 20
(B17.8SS/B68.1TCSS/BG67.1SS/BT62.1TCSS)
Energysavingtips 20
Cleaning 20 - 22
Cleaning the hob top 21
Aftereachuse 21
Cleaning the hob burners 21
Maintaining the cast iron pan stands 22
Installation 22 - 33
Positioning 23-24
Unpacking the appliance 24
Installing the appliance 24 – 27
Gas connection 27
Ventilationrequirements 27-28
Gas Safety (Installation and Use) Regulations 28 - 29
Gas Adjustment (Conversion to LPG) 29 - 30
Minimum flow adjustment for hob gas taps 31
Gas tap maintenance 32 - 33
Electricalconnection 33
Replacing the mains supply cable 33
My appliance isn’t working correctly 34
Contactdetails 35

Environmental note
4
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
all packaging material with due regard for the
environment.
oPlease discard

5
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
ooklet, please contact the Baumatic Advice Line.
ehold use and for
ambient temperature of the
scolouration at
of this temperature limit, will be the liability of
Guarantee. The foregoing does not
t of Baumatic Ltd.
ld not use this appliance to store items on or as a work
kept away
atic service
b
General Information
This appliance is designed for domestic houso
the cooking and frying of domestic foodstuffs.
oIMPORTANT: The adjacent furniture and all materials used in
the installation must be able to withstand a minimum
temperature of 85°C above the
room it is located in, whilst in use.
oCertain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or di
temperatures below the guidelines given above.
oAny damage caused by the appliance being installed in
contravention
the owner.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of
affect your statutory rights.
oThe use of this appliance for any other purpose or in any other
environment without the express agreemen
will invalidate any warranty or liability claim.
oYou shou
surface.
oNo modifications to the appliance are permitted by Baumatic Ltd.
oYou should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be
from the appliance, as they may fuse to the surface.
oRepairs may only be carried out by Baum
engineers or their authorised service agent.

6
hild Safety
ce at any time. During and after use, all
surfaces will be hot.
se ensure that they are kept under close supervision
at all times.
uld only be allowed to utilise the appliance
when supervised.
eneral Safety
e installed and connected by a
GASSAFE registered installer.
uild the appliance into, meet with the relevant
standards.
uring use
hob surface when it
is delivered should be removed before use.
the appliance, otherwise
there is a risk of burns being caused.
t with the hob surface when it is hot or any hot
cookware.
ng with fat and oil the appliance should
not be left unattended.
sure that all of the cooking zones are switched off after
use.
C
oBaumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the applian
oIf it is necessary for younger family members to be in the
kitchen, plea
oOlder children sho
G
oThe appliance should only b
oCare should be taken to ensure that the units and work surfaces
that you b
D
oAny film or stickers that are present on the
oCare should be used when utilising
oYou should not allow the electrical connection cables to come
into contac
oIf fat and oil overheats, then it can ignite extremely quickly. For
this reason, when cooki
oMake

7
leaning
Cleaning of the hob should be carried out on a regular basis.
appliance, it
should be disconnected from the mains and cool.
using this appliance and when
following the cleaning procedure.
other high pressure
cleaning equipment to clean the appliance.
ion of this booklet that refers to
installation.
a result of improper
use or installation of this appliance.
ion
Vehicle, the requirements of N 721 MUST be followed.
t this appliance is
installed on any type of marine vessel.
eclaration of conformity
This appliance complies with the following European Directives:
89 EMC Directive inclusive of
92 Materials that can touch food.
N60335-1, EN60335-2, EN301-1 Safety Standards.
liance must be used by a
ained person for domestic purposes only.
C
o
oIMPORTANT: Before attempting to clean the
oGreat care should be taken whilst
oYou should not use a steam jet or any
Installation
This appliance must be correctly installed by a
GASSAFE registered installer, strictly in
accordance with the manufacturer’s instructions
and the relevant British Standards. Please see the
specific sect
oBaumatic Ltd. declines any responsibility for injury or
damage, to person or property, as
oIf the appliance is being used in a Leisure Accommodat
oBaumatic Ltd. DO NOT recommend tha
D
-73/23/EEC dated 19/02/1973 Low Voltage Directive.
-89/336/EEC dated 03/05/19
Amending Directive 92/31/EEC.
-93/68/EEC dated 22/07/1993 CE Marking Directive.
-89/109/EEC dated 25/01/19
-90/396/EEC Gas Products.
-E
The manufacturer declares that the hob is built using certified
materials and requires the appliance to be installed in accordance with
the standards currently in force. This app
tr

8
pecificationsS
B46
Width: 560 mm
rs
failure safety device on each burner (B46.1TCSS
oLPG conversion jets
.1SS/B46.1TCSS
Product dimensions: Aperture dimensions:
Height: 500 mm Height: 480 mm
Width: 585 mm
Depth: 35 mm
Product specifications:
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o1 x 1.00 kW auxiliary burner
oSide control operation
Pushbutton ignitiono
oEnamelled pan stands
Flameo
only)
Standard accessories:

9
60.3SS
roduct dimensions: Aperture dimensions:
Width: 560 mm
epth: 35 mm
roduct specifications:
rs
1 x 1.00 kW auxiliary burner
n
oFlame failure safety device on each burner
tandard accessories:
oLPG conversion jets
ptional extra:
oBTGRID Double-sided griddle plate
B
P
Height: 500 mm Height: 480 mm
Width: 585 mm
D
P
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oSide control operatio
oPushbutton ignition
oHeavy duty cast iron pan stands
S
O

10
T61.1SS
roduct dimensions: Aperture dimensions:
Width: 560 mm
eight: 35 mm
roduct specifications:
urner
rs
1 x 1.00 kW auxiliary burner
n
Flame failure safety device on each burner
tandard accessories:
ion jets
oWok stand
ptional extra:
oBTGRID Double-sided griddle plate
B
P
Depth: 500 mm Depth: 480 mm
Width: 585 mm
H
P
o1 x 3.30 kW triple crown (wok) b
o2 x 1.75 kW semi-rapid burne
o
oSide control operatio
oPushbutton ignition
oHeavy duty cast iron pan stands
o
S
oLPG convers
O

11
T62.1SS/BT62.1TCSS
roduct dimensions: Aperture dimensions:
Width: 560 mm
eight: 35 mm
roduct specifications:
urner
rs
1 x 1.00 kW auxiliary burner
tion
failure safety device on each burner (BT62.1TCSS
only)
tandard accessories:
ion jets
oWok stand
B
P
Depth: 500 mm Depth: 480 mm
Width: 585 mm
H
P
o1 x 3.30 kW triple crown (wok) b
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
oHeavy duty cast iron pan stands
oFlame
S
oLPG convers

12
G67.1SS
roduct dimensions: Aperture dimensions:
Width: 560 mm
eight: 35 mm
wok) burner
rs
1 x 1.00 kW auxiliary burner
tion
0 cm cut-out size (see above
Flame failure safety device on each burner
tandard accessories:
ion jets
oWok stand
B
P
Depth: 510 mm Depth: 480 mm
Width: 685 mm
H
o1 x 3.30 kW triple crown (
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
oEnamelled pan stands
oFits into a standard 6
dimensional drawing)
o
S
oLPG convers

13
68.1SS/B68.1TCSS
roduct dimensions: Aperture dimensions:
Width: 560 mm
eight: 35 mm
wok) burner
rs
1 x 1.00 kW auxiliary burner
tion
failure safety device on each burner (B68.1TCSS
0 cm cut-out size (see above
dimensional drawing)
tandard accessories:
ion jets
oWok stand
B
P
Depth: 510 mm Depth: 480 mm
Width: 685 mm
H
o1 x 3.30 kW triple crown (
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
oFlame
only)
oHeavy duty cast iron pan stands
oFits into a standard 6
S
oLPG convers

14
17.8SS
roduct dimensions: Aperture dimensions:
Width: 830 mm
eight: 40 mm
roduct specifications:
wok) burner
rs
1 x 1.00 kW auxiliary burner
on
Flame failure safety device on each burner
tandard accessories:
ion jets
oWok stand
ptional extra:
oBTGRID Double-sided griddle plate
B
P
Depth: 510 mm Depth: 480 mm
Width: 860 mm
H
P
o1 x 3.30 kW triple crown (
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oSide control operati
oAutomatic ignition
oHeavy duty cast iron pan stands
o
S
oLPG convers
O

15
lectrical details
Supply Connection: itched fused outlet with
ains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked)
as details
tive LPG G30 (28-30 mbar)
good idea to record
is information before you install your appliance.
odel Number ……………………………….
erial Number ……………………………….
ate of Purchase ……………………………….
as hob surface layout
46.1SS/B46.1TCSS/B60.3SS
r
ary burner
= Ignition button
E
Rated Voltage: 230 Vac 50 Hz
3 A (double pole sw
3mm contact gap)
Max Rated Inputs: 0.008 to 0.02 kW (depending on model)
M
G
Connection: Rp ½ (ISO R7)
Type: Natural Gas (20.9 mbar)
Alterna
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your hob is located on
the underneath of the appliance. Therefore it is a
th
M
S
D
G
B
A = 3.00 kW rapid burner
B = 1.75 kW semi-rapid burne
C = 1.00 kW auxili
D = Control panel
E

16
T61.1SS
r
ary burner
= Ignition button
T62.1SS/BT62.1TCSS
5 kW semi-rapid
0 kW auxiliary
D = Control panel
G67.1SS/B68.1SS/B68.1TCSS
r
5 kW semi-rapid
0 kW auxiliary
B
A = 3.30 kW wok burner
B = 1.75 kW semi-rapid burne
C = 1.00 kW auxili
D = Control panel
E
B
A = 3.30 kW wok burner
B = 1.7
burner
C = 1.0
burner
B
A = 3.30 kW wok burner
B = 3.00 kW rapid burne
C = 1.7
burner
D = 1.0
burner
E = Control panel

17
17.8SS
r
= 1.00 kW auxiliary burner
sing the gas hob
B
A = 3.30 kW wok burner
B = 3.00 kW rapid burner
C = 1.75 kW semi-rapid burne
D
U
Before first use
b surface (see
Cleaning and maintenance” section).
witching the hob on
symbols will appear on the control panel, next to each
ontrol knob:
IMPORTANT: You should clean the ho
“
S
The following
c
= gas off
arge flame: maximum setting
mall flame: minimum setting
is at the end of the anti-clockwise rotation
of the control knob.
ust be selected between the maximum
and minimum position.
L
S
oThe minimum setting
oAll operation positions m

18
oNever select a knob position between the maximum and off
oThe symbol on the control panel, next to the control knob will
perates.
oPress in and turn the appropriate control knob anti-clockwise to
oWhilst pressing in the control knob, press and hold down the
oThe ignition spark will operate, you should hold down the ignition
il the flame is at a suitable level. The
operating position MUST be at a position between the maximum
To switch the burner off, turn the control knob fully clockwise to
oIn case of power failure, the burners can be lit by carefully using
ushbutton ignition with flame failure safety device
ame failure safety device on each
urner, which is designed to stop the flow of gas to the burner head in
oPress in and turn the appropriate control knob anti-clockwise to
oWhilst pressing in the control knob, press and hold down the
You should hold down the ignition button for 20 seconds after
20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
position.
indicate which gas burner it o
Pushbutton ignition (B46.1SS)
the large flame symbol.
ignition button, which is located on the control panel.
button until the flame on the burner has lit.
oTo regulate the flame, you should continue turning the control
knob anti-clockwise unt
and minimum position.
o
the gas off position.
a match.
P
(B46.1TCSS/B60.3SS/BT61.1SS)
The appliance is fitted with a fl
b
the event of the flame going out.
the large flame symbol.
ignition button, which is located on the control panel.
o
the flame on the burner has lit.
oAfter this
symbols.

19
f position.
n be lit by carefully using
a match.
utomatic ignition (BT62.1SS/B68.1SS)
aximum position.
aximum and minimum setting symbols.
f position.
he appliance is fitted with a flame failure safety device on each
igned to stop the flow of gas to the burner head in
e event of the flame going out.
aximum position.
oAfter this 20 second interval, turn the control knob to your
the burner off, turn the control knob fully clockwise to
the gas off position.
oTo switch the burner off, turn the control knob fully clockwise to
the gas of
oIn case of power failure, the burners ca
A
To ignite a burner:
oPress in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
oIf you keep the control knob depressed, the automatic ignition
for the burner will operate.
oOnce the burner is lit, turn the control knob to your required
setting between the m
oTo switch the burner off, turn the control knob fully clockwise to
the gas of
oIn case of power failure, the burners can be lit by carefully using
a match.
Automatic ignition with flame failure safety device
(B17.8SS/B68.1TCSS/BG67.1SS/BT62.1SS)
T
burner, which is des
th
To ignite a burner:
oPress in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
oIf you keep the control knob depressed, the automatic ignition
for the burner will operate.
oYou should hold down the control knob for 20 seconds after the
flame on the burner has lit.
required setting between the maximum and minimum setting
symbols.
oTo switch

20
r failure, the burners can be lit by carefully using
a match.
Energy saving tips
N
oIn case of powe
PA SBURNERS
Minimum
diametre
M
d
aximum
iametre
Wok 220 mm 260 mm
Rapid 180 mm 220 mm
Semi-rapid 120 mm 200 mm
Auxiliary 80 mm 160 mm
oThe diametre of th spond to that
of the burner.
extend beyond the diametre of the
pan.
oUse flat bottomed pans only
keep a lid on the pan whilst cooking.
s centrally over the hob burners and
osition them so that the handles cannot get accidentally caught or
You should also make sure that the handle is not over one
of the other hob burner flames.
e bottom of the pan should corre
oThe burner flame must never
oWhen possible,
oCook vegetables with as little water as possible, to reduce
cooking times.
IMPORTANT: Always place pan
p
knocked off.
Cleaning
Cleaning operations must only be carried out when
the hob is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.