Bear Wood Furniture Montessori User manual

Bear Wood Furniture
Montessori Wardrobe
Assembly Instructions
Please ensure you’ve read our ‘Safety &
Usage’ document before you begin.
Please use the square pocket hole drill
bit provided with an adjustable
screwdriver. We advise you do not use
power tools as they can over tighten
the screws and damage the wood.

1. Lay out contents (Picture 1)
2. Pick either of the two side pieces (One with rounded corner) and lay marking side
up.
Note - Ensure the assembly surface is clean to avoid scratching the outside face.
3. Starting with piece (1), insert a screw into each hole, ensuring each piece is flush
together whilst screwing (Picture 2)
4. Repeat with pieces (2) and (3) adhering to the guide line, which the pieces just
sitting above the guide line.
5. Screw piece (4) and (5), matching the number on the side piece (Picture 3)
6. Insert the hanging rail into the drilled hole. Ensure this is securely slotted into the
drilled slot (Picture 4).
7. With help from a friend, flip your partially assembled wardrobe over onto the other
side piece, and roughly align the numbers, whilst focusing on the hanging rail
and inserting into the drilled slot (Picture 5).
8. Once the hanging rail is slotted in between the two side pieces, match and align
the numbers and lines and screw each piece into the 2nd side piece.
9. Ensure the numbers and lines all match, and then screw in the middle screws
(Picture 6).
10. Ensure all screws are tightly fasted, and stand your newly assembled wardrobe on
its feet (Picture 7).
11. Finally, use the wall brackets provided to fix the wardrobe to a wall or skirting
board to ensure the product can’t topple if climbed or knocked
(Pictures 8 & 9).
Please refer to our ‘Usage & Safety’ document for additional guidance. We hope you
enjoy your new bookshelf!
Contact us @bearwoodfurniture_ // [e-mail]

Picture 1
Picture 2
Picture 3
Picture 4

Picture 5 ^
Picture 6 (Below)
Picture 7 ^
Picture 8 ^ Picture 9 (Below)