Beckmann EMS-5 Series User manual

Coin machine
EMS-5x
Operating instructions
Version screw terminal (starting from 04/2016)
Beckmann mbH © 2016 02.03.2016
Tlf: 91795392 Blåbærdalen 30 6518 Kristiansund
e-mail: [email protected] www.tgelectronics.no

Operating instructions | EMS-5x | Beckmann mbH
Page 2

Operating instructions | EMS-5x | Beckmann mbH
All rights reserved. No part of this manual may be reproduced or copied in any way without
authorization of the Beckmann mbH.
The Beckmann mbH is not liable to the buyer or other persons for damages, losses, costs or
expenses, that are caused by the buyer or other persons by accident, misuse, unauthorized
changes, repair or innovations of the product. Furthermore the Beckmann mbH is not liable for
losses, costs, faults or consequential losses , that may emerge by using this product. The technical
data correspond to the current conditions. Misprints, errors or changes reserved.
Beckmann GmbH
Brandtstraße 1
33161 Hövelhof
Fon +49 (0) 52 57 - 98 23 – 0
Fax [phone] - 98 23 – 11
[e-mail]
www.beckmann-gmbh.de
Page 3
Tlf: 91795392 Blåbærdalen 30 6518 Kristiansund
e-mail: [email protected] www.tgelectronics.no

Operating instructions | EMS-5x | Beckmann mbH
Page 4

Operating instructions | EMS-5x | Beckmann mbH
Table of contents
1 Features.......................................................................................................6
1.1 Common features of the EMS-56 and EMS-57.........................................................................6
1.2 Special features of the EMS-56....................................................................................................... 6
1.3 Special features of the EMS-57....................................................................................................... 6
2 Safety recautions......................................................................................6
3 Installation and maintenance....................................................................7
3.1 Mounting............................................................................................................................................... 7
3.2 Electrical installation......................................................................................................................... 8
4 O eration....................................................................................................9
4.1 Selling time with the EMS-56......................................................................................................... 9
4.2 Selling time with the EMS-57......................................................................................................... 9
4.3 Door opener (optional feature ) EMS-56-TE/EMS-57-TE........................................................9
5 Programming............................................................................................10
5.1 eneral notes.................................................................................................................................... 10
5.2 Basic time (DIP-switches 1-6)....................................................................................................... 10
5.3 Minimum insertion.......................................................................................................................... 12
5.4 Time-factor......................................................................................................................................... 12
5.5 Switching seconds or minutes....................................................................................................12
6 Technical data...........................................................................................13
7 EC-Declaration of Conformity..................................................................14
8 Overview DIP-switch conguration........................................................16
Figure 1 : Dimensions........................................................................................................................................ 7
Page 5

Operating instructions | EMS-5x | Beckmann mbH
1 Features
1.1 Common features of the EMS-56 and EMS-57
•mechanical coin selector, available for dierent types of coins
•programmable minimum insertion (1 up to 4 coins)
•programming via DIP-switches
•from 1 seconds up to 640 minutes per coin selectable
•maximum time up to 99 days
•door opener for washing machines (optional)
1.2 S ecial features of the EMS-56
•one-digit LED-display
•number of inserted coins is displayed (time is not displayed)
1.3 S ecial features of the EMS-57
•three-digit LED-display
•remaining time is displayed
•24 V version available (optional)
2 Safety recautions
The coin operated timers of the EMS-56/57 series are built by the state of technology and the
generally accepted safety-related rules. Nevertheless there may occur risks for the user or other
persons as well as impairments of the device or other values. Use the device only under faultless
conditions, as well as due, safety- and risk-conscious regarding the user manual!
Especially eliminate faults, that may impair safety, immediately! Keep the user manual always on
site of the device! Pay attention - additional to the user manual- to the general valid legal and
other obligatory rules such as accident prevention and environmental protection! Do not make
any changes and/or modications without the authorization of the manufacturer. Spare parts have
to correspond to the manufacturer-dened standards. This is only guaranteed, if original spare
parts are used. Maintain the required or within this manual stated deadlines for repeating
maintenance intervals! Provide a safe and non-polluting disposal of plastic or electrical
replacement parts!
This coin operated timers are exclusive designed for managing dierent electric devices in rooms.
Any other or further use is not provided. The manufacturer is not liable for losses, that result from
misuse. A due use contains to heed the user guide and to observe the terms of service and
maintenance as well.
Page 6

Operating instructions | EMS-5x | Beckmann mbH
3 Installation and maintenance
3.1 Mounting
The unit is provided for xed wiring and assembly in rooms. For xing the device there are three
drillings with a diameter of 6 mm at the back side. It must be taken care, that the case is mounted
vertically, otherwise a proper operation of the coin selector may be reduced. The EMS-56/57 has to
be mounted at a solid wall in order to avoid heavy vibrations.
Figure 1 : Dimensions
Page 7

Operating instructions | EMS-5x | Beckmann mbH
3.2 Electrical installation
The installation of the EMS-56/57 is limited to the connection of the main power supply and the
switched outputs according to the connection survey:
CAUTION :
Arrange that the mounting is accomplished by an authorized electric company. The
electrical connection must be performed by an electrically skilled person
Electrically skilled and qualied personnel must be able to read and understand
electric circuit diagrams, to commission and maintain electrical systems, to wire
switch and control cabinets, to install controlling software, to ensure proper
functioning of electrical components and to identify possible hazards in the work
with electric and electronic systems.
Since this is a stationary device with a xed main power supply, an RCBO must be
installed on the installation side
Figure 2 : Connection diagram standard version 230V (left), special version 24V (right)
Requirements:
•main power supply is power-less
•RCBO is switched o
Technical data connection terminal:
Connection principle Eccentric-top
Insulation stripping length 9,00 mm
Connection data Single wire (solid) 2,50 mm²
Connection data Stranded wire (exible) 2,50 mm²
Connection data Stranded wire (with ferrules) 2,50 mm²
Rated torque/Screw size 0,5 Nm/M2,5
Page 8

Operating instructions | EMS-5x | Beckmann mbH
4 O eration
4.1 Selling time with the EMS-56
The EMS-56 only displays the number of inserted coins via one-digit. The customer will not receive
any direct information about the bought time. If a coin is inserted into the EMS-56, the display
shows “1”.The output however will only be released, if the minimum insertion has been reached. A
blinking display signals, that the minimum insertion has not been reached yet. The display will
increase by one until an amount of 9 coins is reached. Furthermore it is possible to insert more
coins until the maximum time of 99 days is reached. An insertion of more than 9 coins is indicated
by the red dot mark.
CAUTION:
Coins, that are inserted after the maximum time of 99 days
has already been reached, will not get rated.
During operation, the displayed number of paid coins will continously be decreased by one
according to the consumption (remaining number of coins less than nine). If the complete time
has run out, the display changes to “0” and the output will be disabled.
4.2 Selling time with the EMS-57
The EMS-57 displays the remaining time until the output will be blocked. If a coin is inserted, the
released time will be displayed. The output however will only be released, if the minimum
insertion is reached. A blinking display signals, that the minimum insertion has not been reached
yet. An insertion of further coins increases the displayed time by the programmed amount. This
may be repeated until the maximum time of 99 days is reached.
CAUTION:
Coins, that are inserted after the maximum time of 99 days
has already been reached, will not get rated.
During operation, the remaining time is shown in the display of the coin machine. During
operation, the available time is counted down – a ashing red dot indicates this countown status .
If the complete time has run out, the display changes to “0” and the output will be disabled.
4.3 Door o ener (o tional feature ) EMS-56-TE/EMS-57-TE
The door opener is available as an optional feature. Some washing machines or dryers need power
in order to open the door. In order to support this devices, the EMS-56-TE/EMS-57-TE is customized
with a push button at the front side. By pressing this button, the output will be released for 10
seconds.
Page 9

Operating instructions | EMS-5x | Beckmann mbH
5 Programming
5.1 General notes
CAUTION:
In order to program the EMS-56/57, the ISO housing within the EMS-56/57 has
to be opened . Since there is high voltage behind the cover, the main power
supply of EMS-56/57 must be power-less and RCBO must be switched o
10x DIP-switches for programming the EMS-5x are available on the electronic-PCB:
•A, DIP switches 1-6: Time base
•B, DIP switches 7-8: Minimum insertion
•C, DIP switch 9: Selecting time factor 1 or 10
•D, DIP switch 10: Selecting seconds or minutes
5.2 Basic time (DIP-switches 1-6)
The basic time indicates the time, that will be released per every single coin. The basic time can be
congured with DIP-switches 1-6. The resulting time base is the sum of all activated values + 1:
Page 10

Operating instructions | EMS-5x | Beckmann mbH
The following table shows all possible combinations:
Page 11

Operating instructions | EMS-5x | Beckmann mbH
5.3 Minimum insertion
The minimum insertion can be congured with the DIP-switches 7 and 8. The minimum insertion
indicates the minimum number of coins, that have to be inserted to activate the output.
5.4 Time-factor
In order to program time-periods of more than 64 seconds or minutes, you have to set the
DIP-switch 9 to “ON” to activate the time-factor. This will multiply the time by factor 10.
5.5 Switching seconds or minutes
If the congured amount is counted as seconds or minutes can be congured with DIP-switch 10:
Page 12

Operating instructions | EMS-5x | Beckmann mbH
6 Technical data
Standard version
230 V
Special version
24 V
Energy su ly 230 VAC 24 VAC
Contact Ratings
Load Resistive load (cos φ=1)
Rated load 16 A at 250 VAC
Rated carry current 16 A
Max. switching current 16A
Max. switching voltage 440 VAC
Max. switching ower 4.000 VA
General data
Power consum tion 3 W
O erating tem erature 0 to 40 °C
O erating humidity 30 to 70 %
Weight 3,5 kg
Dimensions (W x H x D) 162 x 260 x 110 mm
Page 13

Operating instructions | EMS-5x | Beckmann mbH
7 EC-Declaration of Conformity
Page 14

Operating instructions | EMS-5x | Beckmann mbH
Page 15

Operating instructions | EMS-5x | Beckmann mbH
8 Overview DIP-switch conguration
Page 16