BEHA TV2000IN User manual

Electric Patio Heater
For Wall Mounting
2000W 220-240V 50Hz
Operating Instructions
Thank you for choosing our Electric Patio Heater. You have
purchased a modern product of high quality that is also easy to
use. This owner’s manual is for model TV 2000 IN, and will provide
you with valuable information necessary for the proper care and
maintenance of your new product. Please take a few moments to
read the instructions carefully and familiarize yourself with all the
operational aspects of your new heater. Please keep this manual
for future reference.
SAFETY
To avoid fire or personal injury, please follow our safety rules.

• This patio heater is for outdoor use only.
• Do not use the patio heater for heating rooms indoors.
• Do not use the patio heater in places where there is dust, steam, gas, etc.
• Do not use/install near bathtubs, washing areas or swimming pools.
• The patio heater should not be used where animals are kept.
• The patio heater can be used by children from 8 years and up, people with
reduced physical, sensory or mental abilities, people with lack of experience
and knowledge if they are given supervision or instructions on the use of the
patio heater. The instructions must be given in a safe manner so that the
hazards involved are understood. Children should not play with the patio
heater. Cleaning and maintenance should not be done by children without
supervision.
• WARNING! Children under the age of 8 must be kept away from the patio
heater unless they are continuously monitored.
• WARNING! Avoid contact with the heating element when the patio heater is
in use, and for a certain period after it has been switched off, as it gets very
hot!
• The patio heater must not be used where gas, gasoline, paint or other
flammable goods are stored. Do not use in hazardous areas.
• Do not immerse the patio heater in water for cleaning.
• Do not cover the patio heater during use or shortly after it has been switched
off.
• Do not use a programmer, timer, remote control system or other device to
switch the patio heater on and off automatically, as this will be a fire hazard if
the heater is covered or incorrectly installed.
• The unit must be properly grounded when in use.
• The patio heater should not be placed directly above or below an outlet.
• The socket for the patio heater must be visible and accessible.
• If the patio heater gets damaged, it must be repaired by an authorized
repairman.
• Do not insert anything through the grid of the patio heater.
• To avoid overheating, do not cover the patio heater.

NOTE! Do not connect to the power supply if the patio heater or power
cord is damaged. If in doubt, contact your supplier.
• Remove all packaging before installing the unit. Do not connect to power
supply before you have finished mounting the heater.
• This patio heater must be mounted on the wall horizontally.
Mounting on wall:
• The patio heater must be attached to the wall with the wall bracket provided
to provide adequate ventilation.
• Attach the patio heater to the wall with the switch box facing down to the
floor.
Minimum distances
• 25 cm from side walls.
• 30 cm from the ceiling.
• 180 cm from the floor.
• The patio heater must be mounted in an open area away from any obstacles
that are affected by heat, such as furniture, curtains, glass walls or other
combustible objects (minimum distance in front of the heater is 2 meters).
• The indication for the different positions of the switch should be visible from
a distance of 1 meter.
• The patio heater must be connected to a grounded socket.
• Connect to power supply 220-240V 50Hz.
• Requires 16A fuse.

Mounting
Screw the wall bracket into the wall with 4 screws. The enclosed wall bracket
should be attached to the wall as shown in the picture.
Accessories
1 Wall Bracket
3 Screws M6x10 with nut
1 Wrench 6mm
1 Allen Key
4 Wood Screws

The angle can be adjusted with the Allen key.
Heating element
The heating element produces infrared short wave heat radiation. When the
patio heater is switched on, you will feel the heat immediately. The patio
heater only heats up objects, not air. When the patio heater is switched on,
the power will be greater than the nominal power of 2000W. The effect can
vary between 2200-2500W (just under 1 second) at the moment you switch it
on.
Electrical connection and use
Before connecting the patio heater, make sure that the rated voltage on the
heater is in accordance with the mains voltage at the location where it is
mounted.
220-240V 50 Hz.
The cord switch is used to turn on / off the patio heater. Step 1: OFF
Step 2: 2000W
Although the patio heater is splash proof (IP 55), it should not be exposed to
direct rain during use.
Always disconnect the plug from the socket when the patio heater is not in
use.

Care and maintenance
• Remove the power connection and let the patio heater cool before cleaning.
• Clean the outside of the patio heater with a damp cloth.
• Never use corrosive cleaning agents or place the patio heater in water.
• Repairs should only be carried out by a qualified repairman.
Specifications
• Power supply 220-240V 50Hz
• Nominal power 2000W
• Start-up power (less than 1 sec.) Max 2500W
• Protection class IP55
• Power cord 2M
• Net weight 1,8kg
• Insulation Class 1
• Dimensions 45,5 x 10 x 22,5
(L x H x D) cm 220-240V 50Hz 2000W Max 2500W IP55 2M 1,8kg Class 1
45.5 x 10 x 22.5