Behringer Ultrabass BA410 User manual

Version 1.1 September 2004
Users manual
ENGLISH
ULTRABASS BA410

2
ULTRABASS BA410
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this speaker cabinet near water.
) Clean only with dry cloth.
7) Before putting up the speaker cabinet, you will always have
to make sure that the ground surface is absolutely firm. A
surface that slightly vibrates is unsafe for the cabinet,
therefore: the cabinet should only be put up on firm, even
ground surfaces.
8) Do not put up your speaker cabinet near heat sources such
as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9) Only use attachments/accessories specified by the
manufacturer.
10) Use only with carts, stands, tripods, brackets or tables
specified by the manufacturer or sold with the cabinet. When
a cart is used, use caution when moving the cart/cabinet
combination to avoid injury.
11) Refer all servicing to qualified service personnel only.
Servicing is required when the cabinet has been damaged in
any way (e.g. when the power supply cord or plug have been
damaged), when liquid has been spilled into/onto the cabinet
or objects have fallen into the cabinet, the cabinet exposed
to rain or moisture, does not operate normally, or has been
dropped.
12) Please make sure that no objects or liquid reach the inside
of your cabinet through the openings.

3
ULTRABASS BA410
BA410
ULTRABASS
High-Performance 1,000-Watt Bass Cabinet with riginal 4 x 10" BUGERA Aluminum
Cone Speakers and 1" Horn Driver
sReinforced chamber, front-ported bass cabinet for 1,000 Watts of power handling
sriginal BUGERATM HARD ATTACK Aluminum Cone Speakers
sUltra-fast, direct response and incredible attack
sSwitchable 1" custom-made horn tweeter for high-end punch
sUnique tweeter remote control via footswitch or BEHRINGER MIDI F T C NTR LLER FCB1010
sInput and link outputs on 1/4" TS and professional speaker connectors (compatible with
NEUTRIK® SPEAK N®), impedance 4 hms
sRecessed carrying handles and integrated rollers for easy transportation
sShock proof metal grille, reinforced corners and rugged carpet covering
sExceptionally rugged construction for long life and durability
sConceived and designed by BEHRINGER Germany
NEUTRIK® and SPEAK N® are registered trademarks of their respective owners and are not affiliated with
BEHRINGER®.

4
ULTRABASS BA410
FOREWORD
Dear Customer,
welcome to the team
of ULTRABASS users,
and thank you very
much for express ng
your conf dence n us
by purchas ng the
ULTRABASS BA410 .
Wr t ng th s foreword for
you g ves me great
pleasure, because t
represents the culm -
nat on of many months of
hard work del vered by
our eng neer ng team to
ach eve a very amb t ous
goal: to create an
outstand ng bass
cab net, whose str k ng
sound, features and
qual ty workmansh p offer a max mum n flex b l ty and
performance. The task of des gn ng th s new loudspeaker system
certa nly meant a great deal of respons b l ty, wh ch we assumed
by focus ng on you, the d scern ng mus c an. Meet ng your
expectat ons also meant a lot of work and n ght sh fts. But t was
fun, too. Develop ng a product usually br ngs a lot of people
together, and what a great feel ng t s when all who part c pated
n such a project can be proud of what theyve ach eved.
It s our ph losophy to share our enjoyment w th you, because
you are the most mportant member of the BEHRINGER team.
W th your h ghly competent suggest ons for new products youve
made a s gn f cant contr but on to shap ng our company and
mak ng t successful. In return, we guarantee you uncomprom s ng
qual ty as well as excellent techn cal and aud o propert es at an
extremely reasonable pr ce. All of th s w ll enable you to g ve free
re n to your creat v ty w thout be ng hampered by budget
constra nts.
We are often asked how we manage to produce such h gh-
qual ty equ pment at such unbel evably low pr ces. The answer s
qu te s mple: ts you, our customers! Many sat sf ed customers
mean large sales volumes enabl ng us to get better purchas ng
terms for components, etc. Isnt t only fa r to pass th s benef t on
to you? Because we know that your success s our success too!
I would l ke to thank all of you who have made the
ULTRABASS BA410 poss ble. You have all made your own
personal contr but ons, from the developers to the many other
employees at th s company, and to you, the BEHRINGER user.
My fr ends, ts been worth the effort!
Thank you very much,
Ul Behr nger
TABLE OF CONTENTS
1. INTRODUCTION ........................................................ 5
1.1 Sh pment ......................................................................... 5
1.2 In t al operat on ............................................................... 5
1.3 Warranty ......................................................................... 5
2. CONTROL ELEMENTS AND CONNECTIONS ......... 5
3. APPLICATIONS ......................................................... 6
4. INSTALLATION ......................................................... 8
4.1 Aud o connect ons .......................................................... 8
5. SPECIFICATIONS ..................................................... 8
6. WARRANTY .............................................................. 9
WARNING!
+The BA410 can generate extremely high volume levels.
Please bear in mind that high sound pressure can not
only fatigue but also permanently damage your hearing.
Always make sure to adjust your speaker cabinet to an
appropriate volume level.
1. INTR DUCTI N

5
ULTRABASS BA410
2. C NTR L ELEMENTS AND C NNECTI NS
2. CONTROL ELEMENTS AND
CONNECTIONS
Fig. 2.1.: Control elements and connections
You can connect a footsw tch (e.g. MIDI FOOT
CONTROLLER FCB1010) to th s 1/4" TS connector to
remotely enable/d sable the tweeter. When the tweeter s
enabled, you get a harder, more d rect sound (Hard Attack).
When the tweeter s d sabled, the ent re sound spectrum s
reproduced only on the bass speakers (Soft Attack).
The loudspeakers of the ULTRABASS ser es feature a
1/4" TS connector n the INPUT/LINK sect on as well as two
profess onal speaker connectors (compat ble w th
NEUTRIK® SPEAKON®). All connectors are w red n parallel,
wh ch means that all three connect ons are dent cal n the r
funct on. Therefore, you can connect a second speaker to
the l nk connector output w thout go ng d rectly to the
ampl f er. Th s way, you can ut l ze short cables and w ll
requ re no add t onal connectors on your amp.
+Connecting several ULTRABASS cabinets via the link
connector reduces the input impedance: if you connect
two identical speakers, the impedance is reduced to
one half of the original value, with three speakers to a
third, and so on. Therefore, always keep in mind the
impedance value of your amplifier to avoid causing
damage by overloading. Ideally, the impedance of your
speakers corresponds to the impedance of your
amplifier. If the speaker has a higher impedance than
the amplifier, this will have no negative consequences
on the amp, but it wont be able to pass its full power to
the speaker. See chapter 4. INSTALLATION for more
information.
+Attention! Never connect two amps to one BA410.
Otherwise, you may destroy both your amps and your
speakers.
Th s table shows the correct polar ty of the connectors:
Plus pole (POS) = T p (TIP) on the stereo jack or 1+ on the
profess onal speaker connector.
M nus pole (NEG) = Sleeve (SLV) on the stereo jack or
1- on the profess onal speaker connector.
+Please observe the illustrations 4.1 and 4.2.
SERI L NUMBER. Please take a few m nutes and send us
the completed warranty card w th n 14 days of the date of
purchase; fa lure to do so may vo d future warranty cla ms.
You may also reg ster onl ne at www.behr nger.com.
1. INTRODUCTION
Thank you for express ng your conf dence n our products by
purchas ng the BEHRINGER ULTRABASS BA410. The BA410
s a prem um, unusually powerful bass cab net that was spec ally
developed for deep and respons ve sound reproduct on.
The spec al BUGERATM alum num cone speakers used n the
BA410 guarantee amaz ngly d rect attack and mpuls ve bass.
Add to that the unbel evable power of 1,000 Watts, the outstand ng
workmansh p and good tranpsortab l ty thanks to the ntegrated
rollers. All these character st cs make the ULTRABASS BA410
an absolutely h gh-value, dependable compan on on the stage,
n the stud o or n your pract ce room.
1.1 Shipment
The BA410 was carefully packed at the assembly plant to assure
secure transport. Should the cond t on of the cardboard box
suggest that damage may have taken place, please nspect the
un t mmed ately and look for phys cal nd cat ons of damage.
+Damaged equipment should NEVER be sent directly to
us. Please inform the dealer from whom you acquired
the unit immediately as well as the transportation
company from which you took delivery. Otherwise, all
claims for replacement/repair may be rendered invalid.
+Always use the original packing carton to prevent
damage during storage or transport.
+Never let unsupervised children play with the
ULTRABASS or with its packaging.
+Please dispose of all packaging materials in an
environmentally friendly fashion.
1.2 Initial operation
Connect the ULTRABASS BA410 to a power ampl f er us ng
the speaker connectors located n the back.
+Please make sure to completely lower the volume on
your amp before connecting it to the BA410.
1.3 Warranty
Please take a few m nutes and send us the completed warranty
card w th n 14 days of the date of purchase. You may also reg ster
onl ne at www.behr nger.com. The ser al number needed for the
reg strat on s located n the back of the un t. Fa lure to reg ster
your product may vo d future warranty cla ms.

6
ULTRABASS BA410
3. APPLICATIONS
W th a var ety of connectors and the opt on to comb ne your
BA410 w th other BEHRINGER equ pment, there s a large number
of poss ble appl cat ons for your ULTRABASS. The follow ng
llustrat ons show a few of those.
Fig. 3.1: Mono setup with the ULTR B SS BX3000T
Th s llustrat on shows a s mple setup w th the BEHRINGER
ULTRABASS BX3000T bass ampl f er. Th s setup s part cularly
well su ted for pract ce rooms and smaller venues. On larger
stages, you can connect t to a m x ng console v a the DI Out
connector. The equ pment can be qu ckly assembled and
d sassembled, yet t s amaz ngly flex ble.
Fig. 3.2: Expanded mono setup with different connectivity options for loudspeakers
3. APPLICATI NS
Th s setup s recommended for g gs or pract ce w th b gger
bands. Here, two d fferent cab net are comb ned nto a stack.
Speaker connect on s e ther done separately, so that each cab net
s connected to a separate ULTRABASS BX3000T output, or by
connect ng only one cab net d rectly to the ampl f er, whereby the
s gnal s fed nto the second cab net w th a cable (L nk). Also see
.

7
ULTRABASS BA410
3. APPLICATI NS
Fig. 3.3: Bi-amping: high and low frequencies are separately resproduced by the bass cabinets
Fig. 3.4: Expaned stereo configuration
When us ng the BASS V-AMP or the BASS V-AMP PRO, you
also have the opt on of us ng bass cab nets n the b -amp ng mode.
W th b -amp ng, h gh and low frequency ranges are spl t between
d fferent bass cab nets, so that the ent re sound spectrum s not
s multaneously reproduced on all speakers. In f g. 3.3, low-end
s gnals are reproduced on the BA115, wh le the m ds and the
h ghs are reproduced on the BA210. Spl tt ng the frequency range
requ res an act ve crossover.
Th s stereo setup s meant for all those who crave a saturated
stereo sound. Together w th the BASS V-AMP or the
BASS V-AMP PRO, stereo effects such as Chorus or Delay truly
come al ve. Real stereo effects requ re two separate cab nets set
up to run n stereo. Our EUROPOWER EP2500 s perfect n the
ampl f er role. Add t onally, w th ts 2 x 1,200 Watts, t has the
necessary headroom to truly rock.
The BASS V-AMP and the BASS V-AMP PRO already feature
one such funct on. Here, the frequenc es are spl t n such a way
that the low-end s gnals are reproduced on the left channel, and
the m ds and the h ghs are reproduced on the r ght channel. How
to make the necessary sett ngs on the crossover (X-OVER
funct on) s expla ned n chapter 6.3 (post amp effects) n the
BASS V-AMP/BASS V-AMP PRO manual.
Th s s the expans on to the setup shown n f g. 3.3. Instead of
power ng two nd v dual cab nets, the amp n f g. 3.4 powers each
of the two stacks compr sed of the BA115 and the BA210 cab nets.
The cab nets are connected to one another us ng a l nk cable.
Here, too, we recommend us ng only profess onal loudspeaker
cables (compat ble w th NEUTRIK® SPEAKON®).

8
ULTRABASS BA410
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modifications may be made from time to time to e isting
products without prior notice. Specifications and appearance may differ from those
listed or illustrated.
4. INSTALLATION
4.1 Speaker connector
When comb n ng several speakers/cab nets, you should bear
n m nd the result ng overall mpedance. Here are some br ef
explanat ons about d fferent k nds of connect ons:
Serial connection: The nd v dual mpedance values of the
connected speakers are added up. If two 4-Ohm speakers are
connected to one another, there s an overall mpedance value of
8 Ohms.
Parallel connection: If speaker/cab nets w th dent cal
mpedance values are connected n parallel, the overall nom nal
mpedance s reversely proport onal to the number of speakers,
e.g. f you connect two speakers/cab nets, the nom nal mpedance
s halved; f you connect three speakers/cab nets, the nom nal
mpedance s one th rd of the nd v dual speakers mpedance;
w th four speakers, ts one quarter, and so on. For example, th s
way you can turn two 8-Ohm systems nto one 4-Ohm system.
If four or more speakers/cab nets need to be connected, th s
can be done us ng a serial parallel connection. W th four
speakers w th an mpedance value of 4 Ohms each, the result ng
overall mpedance does not change.
+Whenever possible, try to use thick and short speaker
cables to minimize power loss. Dont lay output cables
near input cables.
W r ng opt ons for loudspeakers are add t onally expla ned n
the follow ng llustrat ons and tables.
Fig. 4.1: Different types of connections
Number of speakers 2x 2x 2x 4x 4x 4x
Impedance of
each speaker (Ω) 48164816
Resulting impedance with
parallel connection (Ω)248124
Resulting impedance with
serial connection (Ω)8 1632163264
Resulting impedance with
serial parallel connection (Ω)---4816
Table 4.1: Speaker wiring options and resulting impedance
+Please note that if the LINK connector is utilized, the
BA and BB series bass cabinets only support parallel
connections.
4.2 Audio connections
Fig. 4.2: Professional speaker connector with polarity allocation
Fig. 4.3: 1/4" TS connector
5. SPECIFICATIONS
H gh-power bass speakers 4 x 10" BUGERATM
Alum num cone speakers
Sens t v ty 99 dB @ 1 W / 1 m
Impedance 4 Ohm
Frequency response 40 Hz - 16 kHz
Power (RMS / Mus c) 1,000 W
Tweeter 1" tweeter dr ver
SPEAKER CONNECTIONS
Input/L nk
2 profess onal
speaker connectors,
compat ble w th
NEUTRIK® SPEAKON®
(w red n parallel)
as well as one 1/4" TS
connector
DIMENSIONS/WEIGHT
Dimensions (W x H x D) 655 mm (25 4/5") x
716 mm (28 1/5") x
407 mm (16")
Weight ca. 45.4 kg (102 lb)
5. SPECIFICATI NS

9
ULTRABASS BA410
6. WARRANTY
6. WARRANTY
§ 1 WARRANTY CARD/ONLINE REGISTRATION
To be protected by the extended warranty, the buyer must
complete and return the enclosed warranty card w th n 14 days
of the date of purchase to BEHRINGER Spez elle Stud otechn k
GmbH, n accordance w th the cond t ons st pulated n § 3. Fa lure
to return the card n due t me (date as per postmark) w ll vo d any
extended warranty cla ms. Based on the cond t ons here n, the
buyer may also choose to use the onl ne reg strat on opt on v a
the Internet (www.behr nger.com or www.behr nger.de).
§ 2 WARRANTY
1. BEHRINGER (BEHRINGER Spez elle Stud otechn k GmbH
nclud ng all BEHRINGER subs d ar es l sted on the enclosed
page, except BEHRINGER Japan) warrants the mechan cal and
electron c components of th s product to be free of defects n
mater al and workmansh p for a per od of one (1) year* from the
or g nal date of purchase, n accordance w th the warranty
regulat ons descr bed below. If the product shows any defects
w th n the spec f ed warranty per od that are not excluded from
th s warranty as descr bed under § 4, BEHRINGER shall, at ts
d scret on, e ther replace or repa r the product us ng su table new
or recond t oned parts. In the case that other parts are used wh ch
const tute an mprovement, BEHRINGER may, at ts d scret on,
charge the customer for the add t onal cost of these parts.
2. If the warranty cla m proves to be just f ed, the product w ll
be returned to the user fre ght prepa d.
3. Warranty cla ms other than those nd cated above are
expressly excluded.
§ 3 RETURN AUTHORIZATION NUMBER
1. To obta n warranty serv ce, the buyer (or h s author zed dealer)
must call BEHRINGER (see enclosed l st) dur ng normal bus ness
hours BEFORE return ng the product. All nqu r es must be
accompan ed by a descr pt on of the problem. BEHRINGER w ll
then ssue a return author zat on number.
2. Subsequently, the product must be returned n ts or g nal
sh pp ng carton, together w th the return author zat on number to
the address nd cated by BEHRINGER.
3. Sh pments w thout fre ght prepa d w ll not be accepted.
§ 4 WARRANTY REGULATIONS
1. Warranty serv ces w ll be furn shed only f the product s
accompan ed by a copy of the or g nal reta l dealers nvo ce. Any
product deemed el g ble for repa r or replacement under the terms
of th s warranty w ll be repa red or replaced.
2. If the product needs to be mod f ed or adapted n order to
comply w th appl cable techn cal or safety standards on a nat onal
or local level, n any country wh ch s not the country for wh ch the
product was or g nally developed and manufactured, th s
mod f cat on/adaptat on shall not be cons dered a defect n
mater als or workmansh p. The warranty does not cover any such
mod f cat on/adaptat on, rrespect ve of whether t was carr ed out
properly or not. Under the terms of th s warranty, BEHRINGER
shall not be held respons ble for any cost result ng from such a
mod f cat on/adaptat on.
3. Free nspect ons and ma ntenance/repa r work are expressly
excluded from th s warranty, n part cular, f caused by mproper
handl ng of the product by the user. Th s also appl es to defects
caused by normal wear and tear, n part cular, of faders,
crossfaders, potent ometers, keys/buttons, tubes, gu tar str ngs,
llum nants and s m lar parts.
4. Damages/defects caused by the follow ng cond t ons are not
covered by th s warranty:
smproper handl ng, neglect or fa lure to operate the un t n
compl ance w th the nstruct ons g ven n BEHRINGER user
or serv ce manuals.
sconnect on or operat on of the un t n any way that does not
comply w th the techn cal or safety regulat ons appl cable n
the country where the product s used.
sdamages/defects caused by force majeure or any other
cond t on that s beyond the control of BEHRINGER.
5. Any repa r or open ng of the un t carr ed out by unauthor zed
personnel (user ncluded) w ll vo d the warranty.
6. If an nspect on of the product by BEHRINGER shows that
the defect n quest on s not covered by the warranty, the nspect on
costs are payable by the customer.
7. Products wh ch do not meet the terms of th s warranty w ll be
repa red exclus vely at the buyers expense. BEHRINGER w ll
nform the buyer of any such c rcumstance. If the buyer fa ls to
subm t a wr tten repa r order w th n 6 weeks after not f cat on,
BEHRINGER w ll return the un t C.O.D. w th a separate nvo ce
for fre ght and pack ng. Such costs w ll also be nvo ced separately
when the buyer has sent n a wr tten repa r order.
§ 5 WARRANTY TRANSFERABILITY
Th s warranty s extended exclus vely to the or g nal buyer
(customer of reta l dealer) and s not transferable to anyone who
may subsequently purchase th s product. No other person (reta l
dealer, etc.) shall be ent tled to g ve any warranty prom se on
behalf of BEHRINGER.
§ CLAIM FOR DAMAGES
Fa lure of BEHRINGER to prov de proper warranty serv ce shall
not ent tle the buyer to cla m (consequent al) damages. In no
event shall the l ab l ty of BEHRINGER exceed the nvo ced value
of the product.
§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. Th s warranty does not exclude or l m t the buyers statutory
r ghts prov ded by nat onal law, n part cular, any such r ghts
aga nst the seller that ar se from a legally effect ve purchase
contract.
2. The warranty regulat ons ment oned here n are appl cable
unless they const tute an nfr ngement of nat onal warranty law.
* Customers n the European Un on please contact
BEHRINGER Germany Support for further deta ls.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. NEUTRIK®,
S EAKON® as well as the names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of
their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®.
BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or
statement contained herein. Colours and specification may vary slightly from product. roducts are sold through our authorised dealers only. Distributors
and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2004 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,
47877 Willich-Münchheide II, Germany
Tel. [phone], Fax [phone]