Behringer ULTRABASS BB410 User manual

Version 1.1 September 2004
Users manual
ENGLISH
ULTRABASS BB410

2
ULTRABASS BB410
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this speaker cabinet near water.
) Clean only with dry cloth.
7) Before putting up the speaker cabinet, you will always have
to make sure that the ground surface is absolutely firm. A
surface that slightly vibrates is unsafe for the cabinet,
therefore: the cabinet should only be put up on firm, even
ground surfaces.
8) Do not put up your speaker cabinet near heat sources such
as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9) Only use attachments/accessories specified by the
manufacturer.
10) Use only with carts, stands, tripods, brackets or tables
specified by the manufacturer or sold with the cabinet. When
a cart is used, use caution when moving the cart/cabinet
combination to avoid injury.
11) Refer all servicing to qualified service personnel only.
Servicing is required when the cabinet has been damaged in
any way (e.g. when the power supply cord or plug have been
damaged), when liquid has been spilled into/onto the cabinet
or objects have fallen into the cabinet, the cabinet exposed
to rain or moisture, does not operate normally, or has been
dropped.
12) Please make sure that no objects or liquid reach the inside
of your cabinet through the openings.

3
ULTRABASS BB410
BB410
ULTRABASS
High-Performance 1,200-Watt Bass Cabinet ith Original 4 x 10" BUGERA Speakers
and 1" Horn Driver
sReinforced chamber, front-ported bass cabinet for 1,200 Watts of power handling
sriginal BUGERA speakers with special high-impact cones
sPowerful and punchy bass tone
sSwitchable 1" custom-made horn tweeter for high-end punch
sUnique tweeter remote control via footswitch or BEHRINGER MIDI F T C NTR LLER
FCB1010
sInput and link outputs on 1/4" TS and professional speaker connectors (compatible with
NEUTRIK® SPEAK N®), impedance 4 hms
sRecessed carrying handles and integrated rollers for easy transportation
sShock proof metal grille, reinforced corners and rugged carpet covering
sExceptionally rugged construction for long life and durability
sConceived and designed by BEHRINGER Germany
NEUTRIK® and SPEAKON® are registered trademarks of their respective owners and are not affiliated with EHRINGER®.

4
ULTRABASS BB410
1. INTR DUCTI N
FOREWORD
Dear Customer,
welcome to the team of
ULTRA ASS users, and
thank you very much for
expressing your confi-
dence in us by
purchasing the
ULTRA ASS 410 .
Writing this foreword for
you gives me great
pleasure, because it
represents the culmi-
nation of many months of
hard work delivered by
our engineering team to
achieve a very ambitious
goal: to create an
outstanding bass
cabinet, whose striking
sound, features and
quality workmanship offer a maximum in flexibility and
performance. The task of designing this new loudspeaker system
certainly meant a great deal of responsibility, which we assumed
by focusing on you, the discerning musician. Meeting your
expectations also meant a lot of work and night shifts. ut it was
fun, too. Developing a product usually brings a lot of people
together, and what a great feeling it is when all who participated
in such a project can be proud of what theyve achieved.
It is our philosophy to share our enjoyment with you, because
you are the most important member of the EHRINGER team.
With your highly competent suggestions for new products youve
made a significant contribution to shaping our company and
making it successful. In return, we guarantee you uncompromising
quality as well as excellent technical and audio properties at an
extremely reasonable price. All of this will enable you to give free
rein to your creativity without being hampered by budget
constraints.
We are often asked how we manage to produce such high-
quality equipment at such unbelievably low prices. The answer is
quite simple: its you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etc. Isnt it only fair to pass this benefit on
to you? ecause we know that your success is our success too!
I would like to thank all of you who have made the
ULTRA ASS 410 possible. You have all made your own
personal contributions, from the developers to the many other
employees at this company, and to you, the EHRINGER user.
My friends, its been worth the effort!
Thank you very much,
Uli ehringer WARNING!
+The BB410 can generate extremely high volume levels.
Please bear in mind that high sound pressure can not
only fatigue but also permanently damage your hearing.
Always make sure to adjust your speaker cabinet to an
appropriate volume level.
TABLE OF CONTENTS
1. INTRODUCTION ........................................................ 5
1.1 Shipment ......................................................................... 5
1.2 Initial operation ............................................................... 5
1.3 Warranty ......................................................................... 5
2. CONTROL ELEMENTS AND CONNECTIONS ......... 5
3. APPLICATIONS ......................................................... 6
4. INSTALLATION ......................................................... 8
4.1 Speaker connector .......................................................... 8
4.2 Audio connections .......................................................... 8
5. SPECIFICATIONS ..................................................... 8
6. WARRANTY .............................................................. 9

5
ULTRABASS BB410
2. C NTR L ELEMENTS AND C NNECTI NS
1. INTRODUCTION
Thank you for expressing your confidence in our products by
purchasing the EHRINGER ULTRA ASS 410. This cabinet
is built with the outstanding UGERATM bass speakers. The
speaker cones are made of special high-quality paper that provide
rich bass tone and clear middle frequencies.
ass players, who love the warm and direct sound of a classic
paper cone, will appreciate the high quality and workmanship as
well as the extremely high power output of these speakers. All
these characteristics make your ULTRA ASS 410 a high-
value, dependable companion on the stage, in the studio or in
your practice room.
1.1 Shipment
The 410 was carefully packed at the assembly plant to assure
secure transport. Should the condition of the cardboard box
suggest that damage may have taken place, please inspect the
unit immediately and look for physical indications of damage.
+Damaged equipment should NEVER be sent directly to
us. Please inform the dealer from whom you acquired
the unit immediately as well as the transportation
company from which you took delivery. Otherwise, all
claims for replacement/repair may be rendered invalid.
+Always use the original packing carton to prevent
damage during storage or transport.
+Never let unsupervised children play with the
ULTRABASS or with its packaging.
+Please dispose of all packaging materials in an
environmentally friendly fashion.
1.2 Initial operation
Connect the ULTRA ASS 410 to a power amplifier using
the speaker connectors located in the back.
+Please make sure to completely lower the volume on
your amp before connecting it to the BB410.
1.3 Warranty
Please take a few minutes and send us the completed warranty
card within 14 days of the date of purchase. You may also register
online at www.behringer.com. The serial number needed for the
registration is located in the back of the unit. Failure to register
your product may void future warranty claims.
2. CONTROL ELEMENTS AND
CONNECTIONS
Fig. 2.1.: Control elements and connections
You can connect a footswitch (e.g. MIDI FOOT
CONTROLLER FC 1010) to this 1/4" TS connector to
remotely enable/disable the tweeter. When the tweeter is
enabled, you get a harder, more direct sound (Hard Attack).
When the tweeter is disabled, the entire sound spectrum is
reproduced only on the bass speakers (Soft Attack).
The loudspeakers of the ULTRA ASS series feature a
1/4" TS connector in the INPUT/LINK section as well as two
professional speaker connectors (compatible with
NEUTRIK® SPEAKON®). All connectors are wired in parallel,
which means that all three connections are identical in their
function. Therefore, you can connect a second speaker to
the link connector output without going directly to the
amplifier. This way, you can utilize short cables and will
require no additional connectors on your amp.
+Connecting several ULTRABASS cabinets via the link
connector reduces the input impedance: if you connect
two identical speakers, the impedance is reduced to
one half of the original value, with three speakers to a
third, and so on. Therefore, always keep in mind the
impedance value of your amplifier to avoid causing
damage by overloading. Ideally, the impedance of your
speakers corresponds to the impedance of your
amplifier. If the speaker has a higher impedance than
the amplifier, this will have no negative consequences
on the amp, but it wont be able to pass its full power to
the speaker. See chapter 4. INSTALLATION for more
information.
+Attention! Never connect two amps to one BB410.
Otherwise, you may destroy both your amps and your
speakers.
This table shows the correct polarity of the connectors:
Plus pole (POS) = Tip (TIP) on the 1/4" TS connector or 1+
on the professional speaker connector.
Minus pole (NEG) = Sleeve (SLV) on the 1/4" TS connector
or 1- on the professional speaker connector.
+Please observe the illustrations 4.1 and 4.2.
SERI L NUMBER. Please take a few minutes and send us
the completed warranty card within 14 days of the date of
purchase; failure to do so may void future warranty claims.
You may also register online at www.behringer.com.

6
ULTRABASS BB410
3. APPLICATI NS
3. APPLICATIONS
With a variety of connectors and the option to combine your
410 with other EHRINGER equipment, there is a large number
of possible applications for your ULTRA ASS. The following
illustrations show a few of those.
Fig. 3.1: Mono setup with the ULTR B SS BX3000T
This illustration shows a simple setup with the EHRINGER
ULTRA ASS X3000T bass amplifier. This setup is particularly
well suited for practice rooms and smaller venues. On larger
stages, you can connect it to a mixing console via the DI Out
connector. The equipment can be quickly assembled and
disassembled, yet it is amazingly flexible.
Fig. 3.2: Expanded mono setup with different connectivity options for loudspeakers
This setup is recommended for gigs or practice with bigger
bands. Here, two different cabinets are combined into a stack.
Speaker connection is either done separately, so that each cabinet
is connected to a separate ULTRA ASS X3000T output, or by
connecting only one cabinet directly to the amplifier, whereby the
signal is fed into the second cabinet with a cable (Link).
Also see .

7
ULTRABASS BB410
3. APPLICATI NS
Fig. 3.4: Expanded stereo configuration
Fig. 3.3: Bi-amping: high and low frequencies are separately reproduced by the bass cabinets
When using the ASS V-AMP or the ASS V-AMP PRO, you
also have the option of using bass cabinets in the bi-amping mode.
With bi-amping, high and low frequency ranges are split between
different bass cabinets, so that the entire sound spectrum is not
simultaneously reproduced on all speakers. In fig. 3.3, low-end
signals are reproduced on the 115, while the mids and the
highs are reproduced on the 210. Splitting the frequency range
requires an active crossover.
This stereo setup is meant for all those who crave a saturated
stereo sound. Together with the ASS V-AMP or the
ASS V-AMP PRO, stereo effects such as Chorus or Delay come
alive. Real stereo effects require two separate cabinets set up to
run in stereo. Our EUROPOWER EP2500 is perfect in the amplifier
role. Additionally, with its 2 x 1,200 Watts, it has the necessary
headroom to truly rock.
The ASS V-AMP and the ASS V-AMP PRO already feature
this function. Here, the frequencies are split in such a way that
the low-end signals are reproduced on the left channel, and the
mids and the highs are reproduced on the right channel. How to
make the necessary settings on the crossover (X-OVER function)
is explained in chapter 6.3 (post amp effects) in the
ASS V-AMP/ ASS V-AMP PRO manual.
This is the expansion of the setup shown in fig. 3.3. Instead of
powering two individual cabinets, the amp in fig. 3.4 powers each
of the two stacks comprised of the 115 and the 210 cabinets.
The cabinets are connected to one another using a link cable.
Here, too, we recommend using only professional loudspeaker
cables (compatible with NEUTRIK® SPEAKON®).

8
ULTRABASS BB410
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to e isting products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
4. INSTALLATION
4.1 Speaker connector
When combining several speakers/cabinets, you should bear
in mind the resulting overall impedance. Here are some brief
explanations about different kinds of connections:
Serial connection: The individual impedance values of the
connected speakers are added up. If two 4-Ohm speakers are
connected to one another, there is an overall impedance value of
8 Ohms.
Parallel connection: If speaker/cabinets with identical
impedance values are connected in parallel, the overall nominal
impedance is reversely proportional to the number of speakers,
e.g. if you connect two speakers/cabinets, the nominal impedance
is halved; if you connect three speakers/cabinets, the nominal
impedance is one third of the individual speakers impedance;
with four speakers, its one quarter, and so on. For example, this
way you can turn two 8-Ohm systems into one 4-Ohm system.
If four or more speakers/cabinets need to be connected, this
can be done using a serial parallel connection. With four
speakers with an impedance value of 4 Ohms each, the resulting
overall impedance does not change.
+Whenever possible, try to use thick and short speaker
cables to minimize power loss. Dont lay output cables
near input cables.
Wiring options for loudspeakers are additionally explained in
the following illustrations and tables.
Fig. 4.1: Different types of connections
Number of speakers 2x 2x 2x 4x 4x 4x
Impedance of
each speaker (Ω) 48164816
Resulting impedance with
parallel connection (Ω)248124
Resulting impedance with
serial connection (Ω)8 1632163264
Resulting impedance with
serial parallel connection (Ω)---4816
Table 4.1: Speaker wiring options and resulting impedance
+Please note that if the LINK connector is utilized, the
BA and BB series bass cabinets only support parallel
connections.
4.2 Audio connections
Fig. 4.2: Professional speaker connector with polarity allocation
Fig. 4.3: 1/4" TS connector
5. SPECIFICATIONS
SPEAKERS
High-power bass speakers 4 x 10" UGERATM
Sensitivity 99 d @ 1 W / 1 m
Impedance 4 Ohm
Frequency response 38 Hz - 16 kHz
Power (RMS / Music) 1,200 W
Tweeter 1" tweeter driver
SPEAKER CONNECTIONS
Input/Link 2 professional speaker
connectors, compatible with
NEUTRIK® SPEAKON®(wired
in parallel) as well as one 1/4" TS
connector
DIMENSIONS/WEIGHT
Dimensions (W x H x D) 655 mm x 716 mm x 407 mm
(25 4/5" x 28 1/5" x 16")
Weight ca. 45.4 kg (100.2 lb)
5. SPECIFICATI NS

9
ULTRABASS BB410
6. WARRANTY
6. WARRANTY
§ 1 WARRANTY CARD/ONLINE REGISTRATION
To be protected by the extended warranty, the buyer must
complete and return the enclosed warranty card within 14 days
of the date of purchase to EHRINGER Spezielle Studiotechnik
GmbH, in accordance with the conditions stipulated in § 3. Failure
to return the card in due time (date as per postmark) will void any
extended warranty claims. ased on the conditions herein, the
buyer may also choose to use the online registration option via
the Internet (www.behringer.com or www.behringer.de).
§ 2 WARRANTY
1. EHRINGER ( EHRINGER Spezielle Studiotechnik GmbH
including all EHRINGER subsidiaries listed on the enclosed
page, except EHRINGER Japan) warrants the mechanical and
electronic components of this product to be free of defects in
material and workmanship for a period of one (1) year* from the
original date of purchase, in accordance with the warranty
regulations described below. If the product shows any defects
within the specified warranty period that are not excluded from
this warranty as described under § 4, EHRINGER shall, at its
discretion, either replace or repair the product using suitable new
or reconditioned parts. In the case that other parts are used which
constitute an improvement, EHRINGER may, at its discretion,
charge the customer for the additional cost of these parts.
2. If the warranty claim proves to be justified, the product will
be returned to the user freight prepaid.
3. Warranty claims other than those indicated above are
expressly excluded.
§ 3 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized dealer)
must call EHRINGER (see enclosed list) during normal business
hours BEFORE returning the product. All inquiries must be
accompanied by a description of the problem. EHRINGER will
then issue a return authorization number.
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by EHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 4 WARRANTY REGULATIONS
1. Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealers invoice. Any
product deemed eligible for repair or replacement under the terms
of this warranty will be repaired or replaced.
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
or local level, in any country which is not the country for which the
product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any such
modification/adaptation, irrespective of whether it was carried out
properly or not. Under the terms of this warranty, EHRINGER
shall not be held responsible for any cost resulting from such a
modification/adaptation.
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes, guitar strings,
illuminants and similar parts.
4. Damages/defects caused by the following conditions are not
covered by this warranty:
simproper handling, neglect or failure to operate the unit in
compliance with the instructions given in EHRINGER user
or service manuals.
sconnection or operation of the unit in any way that does not
comply with the technical or safety regulations applicable in
the country where the product is used.
sdamages/defects caused by force majeure or any other
condition that is beyond the control of EHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by EHRINGER shows that
the defect in question is not covered by the warranty, the inspection
costs are payable by the customer.
7. Products which do not meet the terms of this warranty will be
repaired exclusively at the buyers expense. EHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
EHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced separately
when the buyer has sent in a written repair order.
§ 5 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone who
may subsequently purchase this product. No other person (retail
dealer, etc.) shall be entitled to give any warranty promise on
behalf of EHRINGER.
§ CLAIM FOR DAMAGES
Failure of EHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of EHRINGER exceed the invoiced value
of the product.
§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyers statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
* Customers in the European Union please contact
EHRINGER Germany Support for further details.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. NEUTRIK®,
SPEAKON® as well as the names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of
their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®.
BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or
statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors
and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any e press or implied undertaking or representation.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the e press written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2004 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,
47877 Willich-Münchheide II, Germany
Tel. [phone], Fa [phone]