Behringer V-Tone GM212 User manual

Version 1.1 May 2006
Users Manual
V-TONE GM212

2
V-TONE GM212
IMPORTANT SAFETY PRECAUTIONS
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions
in the accompanying literature. Please read the
manual.
This symbol, wherever it appears, alerts you to the
presence of uninsulated dangerous voltage inside
the enclosurevoltage that may be sufficient to
constitute a risk of shock.
CAUTION: To reduce the risk of electric shock, do not remove
the top cover (or the rear section). No user
serviceable parts inside refer servicing to qualified
personnel.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain and moisture. The
apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
DETAILED SAFETY INSTRUCTIONS:
1) Read these instructi ns.
2) Keep these instructi ns.
3) Heed all warnings.
4) F ll w all instructi ns.
5) D n t use this apparatus near water.
6) Clean nly with dry cl th.
7) D n t bl ck any ventilati n penings. Install in
acc rdance with the manufacturers instructi ns.
8) D n t install near any heat s urces such as radiat rs,
heat registers, st ves, r ther apparatus (including
amplifiers) that pr duce heat.
9) D n t defeat the safety purp se f the p larized r
gr unding-type plug. A p larized plug has tw blades
with ne wider than the ther. A gr unding type plug
has tw blades and a third gr unding pr ng. The wide
blade r the third pr ng are pr vided f r y ur safety. If
the pr vided plug d es n t fit int y ur utlet, c nsult
an electrician f r replacement f the bs lete utlet.
10) Pr tect the p wer c rd fr m being walked n r
pinched particularly at plugs, c nvenience receptacles,
and the p int where they exit fr m the apparatus.
11) Only use attachments/access ries specified by the
manufacturer.
12) Use nly with the cart, stand, trip d, bracket, r table
specified by the manufacturer, r s ld with the
apparatus. When a cart is used, use cauti n when m ving
the cart/apparatus c mbinati n t av id injury fr m
tip- ver.
13) Unplug this apparatus during lightning st rms r
when unused f r l ng peri ds f time.
14) Refer all servicing t qualified service pers nnel.
Servicing is required when the apparatus has been
damaged in any way, such as p wer supply c rd r plug
is damaged, liquid has been spilled r bjects have fallen
int the apparatus, the apparatus has been exp sed t
rain r m isture, d es n t perate n rmally, r has been
dr pped.
15) CAUTION - These service instructi ns are f r use by
qualified service pers nnel nly. T reduce the risk f
electric sh ck d n t perf rm any servicing ther than
that c ntained in the perati n instructi ns unless y u
are qualified t d s .

3
V-TONE GM212
GM212
V-TONE
True Analog Modeling 120-Watt Guitar Workstation with 2 Independent hannels, each Featuring
27 Modeled Sounds
sPowerful 120-Watt 2-Channel Guitar Workstation with authentic V-T NE Analog Modeling
sTwo original heavy-duty 12'' BUGERA Vintage Guitar speakers for classic sound reproduction
sAuthentic V-T NE Analog Modeling for 3 classic guitar amps, 3 speaker simulation models plus
3 gain modes27 modeled sounds individually selectable per channel
s2 independent, full-featured modeling channels offering everything you need from clean to crunch to
super-fat distortion sounds
sAdditional headphone output with integrated speaker simulation
sDedicated CD input for playback of line-level signals (e.g. CD player, drum machine)
sFX loop for external effects devices (rack effects, stomp boxes, wah-wah pedals, etc.)
sHigh-quality components and exceptionally rugged construction ensure long life
sConceived and designed by BEHRINGER Germany

4
V-TONE GM212
1. INTRODUCTION
This powerful hence unbelievably affordable guitar workstation
with plenty of attitude features authentic V-TONE analog modeling
and two original heavy-duty 12" BUGERA vintage guitar
speakers, delivering that classic sound best known from the
decades past. Our renowned authentic V-TONE analog modeling
features 3 classic guitar amps, 3 speaker simulation models plus
3 gain modesall in all, a total of 27 modeled sounds individually
selectable per each independent, full-featured channel. For added
versatility, there is an additional headphone output with integrated
speaker simulation and a dedicated CD input for playback or
other line-level signals such as drum computers. Without
exaggeration, this is an ideal tool for grooming your playing skills!
+The f ll wing users manual will familiarize y u with
the c ntr l elements f y ur new V-TONE and let y u
learn all f its functi ns. After reading this manual,
st re it s mewhere where y u can easily find in the
future, sh uld y u need t l k up s me inf rmati n.
1.1 Before you get started
1.1.1 Shipment
The V-TONE was carefully packed at the assembly plant to
assure secure transport.
Should the condition of the cardboard box suggest that your
V-TONE may have been damaged in transport, please inspect
the unit immediately and look for physical indications of damage.
TABLE OF CONTENTS
1. INTRODUCTION ......................................................... 4
1.1 Before you get started ................................................... 4
1.1.1 Shipment ............................................................... 4
1.1.2 Initial operation ...................................................... 5
1.1.3 Online registration ................................................ 5
2. CONTROL ELEMENTS AND CONNECTIONS ............. 5
2.1 Front panel ...................................................................... 5
2.2 Rear panel ...................................................................... 6
3. APPLICATIONS .......................................................... 6
4. AUDIO CONNECTIONS ............................................... 7
5. SPECIFICATIONS ....................................................... 7
6. ARRANTY ................................................................ 8
FOREWORD
Dear Customer,
welcome to the team of
BEHRINGER users, and
thank you very much for
expressing your confi-
dence in us by purchasing
the BEHRINGER V-TONE.
Writing this foreword
for you gives me great
pleasure, because it
represents the cul-
mination of many months
of hard work delivered
by our engineering
team to achieve a very
ambitious goal: to de-
velop an outstanding
guitar amp, which is at
the forefront of what is
technically possible and
can be used in many different applications. The task of designing
our new V-TONE certainly was a great responsibility, which we
assumed by focusing on you, the discerning user and musician.
Meeting your expectations also meant a lot of work and night
shifts. But it was fun, too. Developing a product usually brings a
lot of people together, and what a great feeling it is when all who
participated in such a project can be proud of what theyve
achieved.
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER team.
With your highly competent suggestions for new products youve
made a significant contribution to shaping our company and making
it successful. In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
reasonable price. All of this will enable you to give free rein to
your creativity without being hampered by budget constraints.
We are often asked how we manage to produce such high-
quality devices at such unbelievably low prices. The answer is
quite simple: its you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etc. Isnt it only fair to pass this benefit on
to you? Because we know that your success is our success
too!
I would like to thank all of you who have made the V-TONE
possible. You have all made your own personal contributions,
from the developers to the many other employees at this company,
and to you, the BEHRINGER user.
My friends, its been worth the effort!
Thank you very much,
Uli Behringer
WARNING!
+We w uld like t bring y ur attenti n t the fact that
extremely l ud s und levels may damage y ur
hearing as well as y ur headph nes. Please turn
the MASTER c ntr l all the way t the left bef re
p wering up the unit. Always try t keep v lume at
appr priate levels.
1. INTR DUCTI N

5
V-TONE GM212
2. C NTR L ELEMENTS AND C NNECTI NS
2. CONTROL ELEMENTS
AND CONNECTIONS
Control elements of your V-TONE guitar amp are described in
this section. All controls and connections are explained in detail,
and we give you useful tips on how to use them. An illustration
of control elements with corresponding numbering can be found
on the next page.
2.1 Front panel
The connector labeled INPUT is the 1/4" jack input of your
V-TONE. Use it to connect your guitar. Use a commercially
available 1/4" jack mono cable (no DIY, ask your specialized
dealer) with good mechanical and electrical shielding to
avoid unpleasant surprises during rehearsals or concerts.
CHANNEL 1. Because the GM212 features two identical
modeling channels, the control elements will be described
in detail in channel 2 (control elements through ).
Use the CHANNEL switch to alternate between the two
modeling channels. The channel LED lights up when
the channel is activated. You can also switch between
channels using a footswitch (not included).
The DRIVE control determines the amount of distortion in
the respective Modeling Channel. Using this, you can ideally
adjust the V-TONE preamp to the output level of your guitar
pick-up to achieve the desired amount of distortion
(depending on the amp, mode and speaker combination
you selected).
The CHANNEL LED indicates the currently selected
channel.
Use the AMP switch to one of the three guitar amps that
orient themselves on classic tube amps. You will surely
recognize these classic amp sounds as soon as you hear
them. If you select TWEED, expect crystal-clear, transparent
sounds with dynamic bass. You get aggressive mids and
pressure-rich, inescapable assertiveness and endurance
when you select BRITISH. Rounder and more evened-out
(yet still sophisticated) sounds can be dialed up if you
select CALIF.(ornian) perfect for lead sounds!
Use the MODE switch to choose one of three possible
gain settings (CLEAN, HI GAIN and HOT) you wish to use
with the basic sound you selected with the AMP switch.
The SPEAKER switch offers the simulations of two classic
guitar speakers: 4 x 12" speaker in an enclosed casing
(U.K.) and 2 x 12" speaker in an open casing (US). Additionally,
we have included a frequency response correction (FLAT),
specially modified to go with V-TONEs cabinet.
The LOW control on the EQ section lets you cut or boost
the bass frequencies.
Use the MID control to cut or boost the mids.
The HIGH control regulates the upper frequency range.
The LEVEL control adjusts the volume of the respective
channel. Adjust LEVEL to achieve the desired volume
balance between both channels.
The CD IN (RCA connectors) lets you feed an additional
stereo signal into your V-TONE. You can play along to the
beat of a drum computer or play to music from a CD or MD
player.
+ FX INSERT: Your V-TONE features a serial insert
loop that can be used to connect external effects
(e. g. a wah-wah pedal). Connect the SEND connector
on the V-TONE to the input of your effects unit. Connect
the output of your external effects unit to the RETURN
connector of your V-TONE.
+Damaged equipment sh uld NEVER be sent directly
t us. Please inf rm the dealer fr m wh m y u
acquired it immediately as well as the trans-
p rtati n c mpany fr m which y u t k delivery.
Otherwise, all claims f r replacement/repair may
be rendered invalid.
+If the unit needs t be shipped, please always use
the riginal packaging t av id damage.
+Never let unsupervised children play with the
V-TONE r with its packaging.
+Please disp se f all packaging materials in an
envir nmentally-friendly fashi n.
1.1.2 Initial operation
Please make sure that your V-TONE is provided with sufficient
ventilation, and never place it on other amplifiers or in the vicinity
of a heater to avoid the risk of overheating.
+Bef re plugging y ur V-TONE int a p wer s cket,
please make sure y u have selected the c rrect
v ltage:
The fuse mount near the power cord connector has three
triangular markings. Two of these triangles are facing opposite
one another. Your V-TONE is set up for the voltage indicated
near these markings, and can be altered by turning the fuse
mount by 180 degrees. ATTENTION: This d es n t apply t
exp rt m dels built f r 120 V, f r example!
+If y u use y ur V-TONE unit with a different v ltage,
y u must change the fuses acc rdingly. The c rrect
value f the fuses needed can be f und in the
secti n SPECIFICATIONS.
+Faulty fuses must be replaced with fuses f
appr priate rating, with ut excepti n! The c rrect
value f the fuses needed can be f und in the
secti n SPECIFICATIONS.
Power is delivered via the cable that was delivered with the
V-TONE. All mandatory safety precautions have been adhered to.
+Please make sure that all y ur equipment is
gr unded at all times. F r y ur wn pr tecti n, y u
sh uld never tamper with the gr unding f the cable
r the unit itself. The unit shall always be c nnected
t a mains s cket utlet with a pr tective earthing
c nnecti n.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have
it repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was
purchased. Should your BEHRINGER dealer not be located in
your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!

6
V-TONE GM212
+Y u can use the INSERT SEND as a parallel utput.
This is useful, f r example, when y u want t rec rd
the guitar signal with ut a micr ph ne. As l ng as
the RETURN c nnect r has n thing plugged int it,
the signal will n t be interrupted internally.
The PHONES connector lets you monitor the signal from
your V-TONE with standard headphones. The BEHRINGER
HP series is well suited for this, for example. When the
PHONES connector is used, the internal loudspeakers and
speaker outputs are disconnected.
Connect the mono jack connector of a footswitch to the
FOOTSWITCH connector. The footswitch lets you switch
between two channels.
The PRESENCE control gives you an additional way to cut
or boost the highs.
The MASTER control regulates the overall volume as well
as headphone volume.
The POWER switch powers up your V-TONE. The POWER
switch should always be in the Off position before you
connect the V-TONE to the main power source.
+Please n te: The POWER switch d es n t fully
disc nnect the unit fr m the mains. T disc nnect
the unit fr m the mains, pull ut the main c rd plug
r appliance c upler. When installing the pr duct,
ensure the plug r appliance c upler is readily
perable. Unplug the p wer c rd when the unit is
n t used f r pr l nged peri ds f time.
2.2 Rear panel
Fig. 2.2: GM212 rear anel
FUSE RETAINER/VOLTAGE SELECTOR. Please make
sure that the voltage indicated by the voltage selector
matches the local voltage before you connect the unit to
the main power supply. Always replace blown fuses with
fuses of the same type and rating. Some units feature a
fuse retainer in which a selection between 230 V and 120
V is possible. Please be aware: When using your unit
outside of Europe with 120 V, a fuse with a higher rating is
required.
Power is supplied via an IEC connector. The matching
cable is provided with the unit.
SERIAL NUMBER.
3. APPLICATIONS
The V-TONE features many different connectors, allowing you
to adapt to all kinds of application challenges. We have listed just
a few examples to show the flexibility of your V-TONE.
Fig. 3: Wiring exam le
To use your V-TONE in practice rooms, or to jam at home, connect
your V-TONE as illustrated in figure 3. Connect a CD player (or a
drum computer) to the CD input. If you want to (or have to!)
practice using headphones, connect your headphones to the
PHONES connector on your V-TONE. The loudspeaker is
automatically muted. Connect a footswitch with a 1/4" TS jack
connector to the footswitch input. Use the footswitch to switch
between modeling channels. This is especially useful in live
situations.
3. APPLICATI NS
Fig. 2.1: GM212 front anel

7
V-TONE GM212
5. SPECIFICATI NS
Connect the input of an effects unit to the FX INSERT SEND
connector of the V-TONE connect the output of your effects
unit to the FX INSERT RETURN connector. Of course, you can
insert a wah-wah pedal or 19" effects units instead of stomp
boxes.
If you want to use your GM212 in home recording or studio
situations, it is best to use the FX INSERT SEND connector on the
V-TONE to record the guitar signal without a microphone.
If you want to use another guitar preamp, or a modeling amp
(e. g. the V-AMP 2 or the V-AMP PRO), connect it to the FX
INSERT RETURN connectors. The GM212 now operates only as
a power amp, with its preamp section inactive.
4. AUDIO CONNECTIONS
You will need many different cables for the various applications.
The following illustrations show how these cables should be
laid out. Please, only use high-grade cables. The audio inputs
and outputs on your BEHRINGER V-TONE are provided in the
form of mono jack connectors. The CD input uses RCA
connectors.
+Please keep in mind that y ur V-TONE sh uld be
installed and perated nly by th se wh p ssess
sufficient technical kn wledge ab ut its installati n
and perati n. Every ne dealing with y ur V-TONE
sh uld be sufficiently gr unded b th during the
installati n as well as during actual usage. Failure
t d s may cause undesirable r faulty perati n
due t electr magnetic discharges, etc.
Fig. 4.1: 1/4" TS connector
Fig. 4.2: 1/4" stereo TRS connector for PHONES
Fig. 4.3: 1/4" TS connector for the footswitch
5. SPECIFICATIONS
*0
GUITAR IN 1/4" TS, RF filtered
Input Impedance approx. 1 M
: unbalanced
FX INSERT RETURN 1/4" TS
Input Impedance approx. 10 k
: unbalanced
CD IN RCA
Input Impedance approx. 40 k
: unbalanced
FX INSERT SEND 1/4" TS, low-impedance, line level
Output Impedance approx. 100
: unbalanced
PHONES OUT 1/4" TRS stereo
Max. output level +15 dBu / 100
: (+23 dBm)
power amp output
120 W / 4 :
Type 2 x 12"
Model
BUGERA™
Vintage Guitar Series
Impedance 8
:
Power handling 70 W
USA/Canada 120 V~, 60 Hz
Europe 230 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
China/Korea 220 V~, 50 Hz
General Export model
120/230 V~, 50 - 60 Hz
Power consumption max. 200 watts
Fuses 100 - 120 V~
7$+ 250 V
Fuses 220 - 240 V~
7$+ 250 V
Mains connection Standard IEC receptacle
Dimesions
(H x W x D) 494 x 713 x 257 mm 19.5 x 28 x 10.1"
Weight 47.6 lbs ( 21.6 kg)
32:(56833/<
',0(16,216$1':(,*+7
$8',2,13876
$8',22873876
6<67(063(&,),&$7,216
/28'63($.(56
Mains voltage
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to e isting products without prior notice. Specifications and
appearance may differ from those listed or illustrated.

8
V-TONE GM212
6. WARRANTY
6. WARRANTY
§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyers statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
§ 2 ONLINE REGISTRATION
Please do remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!
§ 3 WARRANTY
1. BEHRINGER (BEHRINGER International GmbH including all
BEHRINGER subsidiaries listed on the enclosed page, except
BEHRINGER Japan) warrants the mechanical and electronic
components of this product to be free of defects in material and
workmanship for a period of one (1) year* from the original date
of purchase, in accordance with the warranty regulations
described below. If the product shows any defects within the
specified warranty period that are not excluded from this
warranty as described under § 5, BEHRINGER shall, at its
discretion, either replace or repair the product using suitable
new or reconditioned parts. In the case that other parts are used
which constitute an improvement, BEHRINGER may, at its
discretion, charge the customer for the additional cost of these
parts.
2. If the warranty claim proves to be justified, the product will
be returned to the user freight prepaid.
3. Warranty claims other than those indicated above are
expressly excluded.
§ 4 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized
dealer) must call BEHRINGER (see enclosed list) during normal
business hours BEFORE returning the product. All inquiries must
be accompanied by a description of the problem. BEHRINGER
will then issue a return authorization number.
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 5 WARRANTY REGULATIONS
1. Warranty services will be furnished only if the product
is accompanied by a copy of the original retail dealers invoice.
Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replaced.
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
or local level, in any country which is not the country for which
the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptation.
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes, guitar strings,
illuminants and similar parts.
4. Damages/defects caused by the following conditions are
not covered by this warranty:
simproper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER user
or service manuals.
sconnection or operation of the unit in any way that does
not comply with the technical or safety regulations
applicable in the country where the product is used.
sdamages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that
the defect in question is not covered by the warranty, the
inspection costs are payable by the customer.
7. Products which do not meet the terms of this warranty will
be repaired exclusively at the buyers expense. BEHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
§ 6 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone
who may subsequently purchase this product. No other person
(retail dealer, etc.) shall be entitled to give any warranty promise
on behalf of BEHRINGER.
§ 7 CLAIM FOR DAMAGES
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER exceed the invoiced value
of the product.
* Customers in the European Union please contact BEHRINGER
Germany Support for further details.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names
of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use
neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no
liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not
agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any e press or implied undertaking or representation. No part of this
manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the e press written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany.
Tel. [phone], Fa [phone]