4
EUROPOWER PMH2000
SPECIFICATIONS
Mono inputs
Microphone inputs
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz 20 kHz)
@ 0 Ω source resistance 122 dB / 125 dB A weighted
@ 50 Ω source resistance 122 dB / 125 dB A weighted
@ 150 Ω source resistance 121 dB / 124 dB A weighted
Frequency response <10 Hz 100 kHz ( 1 dB),
<10 Hz >200 kHz ( 3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ +8 dB gain
Impedance approx. 2.2 kΩ balanced /
1.1 kΩ unbalanced
Signal to noise ratio 110 dB / 114 dB A weighted
( 11 dBu In @ +33 dB gain)
Distortion (THD+N) 0.001% / 0.0008% A weighted
Mono line inputs
Type 1/4" TRS connector, balanced
Impedance approx. 80 kΩ balanced,
40 kΩ unbalanced
Max. input level 30 dBu
Stereo line inputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 40 kΩ unbalanced
Max. input level +28 dBu
EQ
L o w 60 Hz / ±15 dB
Mid 700 Hz / ±15 dB
High 6 kHz / ±15 dB
Preamp outputs left/mono & right
Type 1/4" TRS connector, unbalanced
Impedance approx. 1.5 kΩ
Max. output level +21 dBu
Po er amp inputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 47 kΩ
Max. input level +21 dBu
Monitor output
Type 1/4" TRS connector, unbalanced
Impedance 1.5 kΩ
Max. output level +21 dBu
DSP 24 bit Texas InstrumentsTM
Converter 24 bit Sigma Delta,
64/128 times oversampling
Sampling rate 46.875 kHz
Main mix system data1
Noise
Main mix @ oo,
Channel fader oo 76 dB / 80 dB A weighted
Main mix @ 0 dB,
Channel fader oo 72 dB / 76 dB A weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB 71 dB / 75 dB A weighted
Po er amp specifications
Power amp output (Sine @ 1 % THD)
Stereo mode 250 Watts into 4 Ω
180 Watts into 8 Ω
Bridge mode 500 Watts into 8 Ω
Loudspeaker connections
Loudspeaker connector Professional speaker
connectors (compatible to
NEUTRIK® SPEAKON®)
Load impedance
Left/monitor 4/8/16 Ω
Right/mono main 4/8/16 Ω
Bridge 8/16 Ω
Po er supply
Voltage USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 60 Hz
General export model
120/230 V~, 50 60 Hz
Power consumption max. 1 kW
Fuse 100 120 V~: T 10 A H 250 V
200 240 V~: T 6.3 A H 250 V
Mains connection Standard IEC receptacle
Physical/ eight
Dimensions (H x W x D) approx. 11" (280 mm) x 18 1/8"
(460 mm) x 10 5/8" (270 mm)
Weight (net) approx. 30.9 lbs (14 kg)
Measuring conditions:
1: 20 Hz - 20kHz; measured at preamp output.
All channels: level controls in center position; EQ flat.
Reference 0 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.
