Behringer EURORACK UB1622FX-PRO User manual

Version 1.4 February 2006
Technical Specifications
EURORACK UB1622FX-PRO

2
EURORACK UB1622FX-PRO
UB1622FX-PRO
EURORACK
Ultra Low-Noise Design 16-Input 2/2-Bus ic/Line ixer with Premium ic Preamplifiers
and 24-Bit ulti-FX Processor
sUltra low-noise ULN design, highest possible headroo , ultra-transparent audio
s4 new state-of-the-art, studio-grade IMP Invisible Mic Prea ps with:
 130 dB dyna ic range for 24-bit, 192 kHz sa pling rate inputs
 Ultra-wide 60 dB gain range
 Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
sStudio-grade 24-bit stereo FX processor with 100 aweso e presets including reverb, chorus, flanger, delay,
pitch shifter and various ulti-effects
sEffective, extre ely usical 3-band EQ with se i-para etric id band plus switchable low-cut filter on all
ono channels
sInserts on each ono channel for flexible connection of outboard equip ent
s12 balanced high-headroo line inputs with +4/-10 level selection on stereo channels
sState-of-the-art 4580 operational a plifiers provide lowest noise and distortionbetter than 4560 op a ps
s2 aux sends per channel: 1 pre/post fader switchable for onitoring/FX applications, 1 post fader (for
internal FX or as external send)
sPeak LEDs, ute, ain ix and subgroup routing switches, solo and PFL functions on all channels
s2 subgroups with separate outputs for added routing flexibility
s2 ulti-functional stereo aux returns with flexible routing
sMain ix outputs with jack and gold-plated XLR connectors, separate control roo , headphones and
stereo tape outputs
sControl roo /phones outputs with ulti-input source atrix
sTape inputs assignable to ain ix or control roo /phones outputs
sSwitchable +48 V phanto power for condenser icrophones
sLong-wearing 60 logarith ic-taper faders and sealed rotary controls
sInternal switch- ode power supply for axi u flexibility (100 - 240 V~), noise-free audio, superior transient
response plus lowest possible power consu ption for energy saving
sRack ount brackets included
sHigh-quality co ponent co ponents and exceptionally rugged construction ensure long life
sConceived and designed by BEHRINGER Ger any

3
EURORACK UB1622FX-PRO
BLOCK DIAGRAM

4
EURORACK UB1622FX-PRO
SPECIFICATIONS
Microphone inputs (IMP Invisible Mic Preamp)
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz 20 kHz)
@ 0 W source resistance 134 dB / 135.7 dB A weighted
@ 50 W source resistance 131 dB / 133.3 dB A weighted
@ 150 W source resistance 129 dB / 130.5 dB A weighted
Frequency response <10 Hz 150 kHz ( 1 dB),
<10 Hz 200 kHz ( 3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB Gain
Impedance approx. 2.6 kW balanced
Signal to noise ratio 110 dB / 112 dB A weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A weighted
Line input
Type 1/4" TRS connector
electronically balanced
Impedance approx. 20 kW balanced
10 kW unbalanced
Gain range 10 to +40 dB
Max. input level +22 dBu @ 0dB Gain
Fade-out attenuation1
( rosstalk attenuation)
Main fader closed 90 dB
Channel muted 89 dB
Channel fader closed 89 dB
Frequency response
Microphone input to main out
<10 Hz 90 kHz +0 dB / 1 dB
<10 Hz 160 kHz +0 dB / 3 dB
Stereo inputs
Type 1/4" TRS connector,
electronically balanced
Impedance approx. 20 kW
Max. input level +22 dBu
EQ mono channels
L o w 80 Hz / ±15 dB
Mid 100 Hz 8 kHz / ±15 dB
High 12 kHz / ±15 dB
EQ stereo channels
L o w 80 Hz / ±15 dB
Low Mid 500 Hz / ±15 dB
High Mid 3 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux sends
Type 1/4" TS connector, unbalanced
Impedance approx. 120 W
Max. output level +22 dBu
Stereo aux returns
Type 1/4" TRS connector,
electronically balanced
Impedance approx. 20 kW bal. / 10 kW unbal.
Max. input level +22 dBu
Main outputs
Type 1/4" TS connector unbalanced
Impedance approx. 240 W balanced /
120 W unbalanced
Max. output level +22 dBu
ontrol room outputs
Type 1/4" TS connector unbalanced
Impedance approx. 120 W
Max. output level +22 dBu
Headphones outputs
Type 1/4" TRS connector, unbalanced
Max. output level +19 dBu / 150 W (+25 dBm)
DSP 24 bit
Converter 24 bit Sigma Delta,
64/128 times oversampling
Sampling rate 40 kHz
Main mix system data2
Noise
Main mix @ oo,
Channel fader @ oo 101 dB
Main mix @ 0 dB,
Channel fader @ oo 96 dB
Main mix @ 0 dB,
Channel fader @ 0 dB 83 dB
Power supply
Mains voltage 100 to 240 V~, 50/60 Hz
Power consumption 37 W
Fuse 100 240 V~: T 1.6 A H 250 V
Mains connection Standard IEC receptacle
Physical/weight
Dimensions (H x W x D) approx. 3 7/8" x 11 7/8" x 13 7/8"
(97 mm x 301 mm x 351 mm)
Weight (net) approx. 3.3 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; E flat; all
channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far
right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.

5
EURORACK UB1622FX-PRO
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of
printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the
trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies
either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly
from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and
have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a
registered trademark.
ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns Martin Schleyer Str. 36 38, 47877 Willich Münchheide II, Germany.
Tel. [phone], Fax [phone]