3
XENYX 1222FX
SPECIFICATIONS
Mono inputs
Microphone inputs (XENYX Mic Preamp)
Type XLR, electronically balanced,
discrete input circuitry
Mic E.I.N. (20 Hz 20 kHz)
@ 0 W source resistance 134 dB / 135.7 dB A weighted
@ 50 W source resistance 131 dB / 133.5 dB A weighted
@ 150 W source resistance 129 dB / 130.5 dB A weighted
Frequency response <10 Hz 150 kHz ( 1 dB),
<10 Hz 200 kHz ( 3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB Gain
Impedance approx. 2.6 kW balanced
Signal to noise ratio 110 dB / 112 dB A weighted
(0 dBu In @ +22 dB Gain)
Distortion (THD+N) 0.005% / 0.004% A weighted
Line input
Type 1/4" TRS connector,
electronically balanced
Impedance approx. 20 kW balanced
10 kW unbalanced
Gain range 10 to +40 dB
Max. input level +22 dBu @ 0 dB Gain
Fade-out attenuation1
(Crossta k attenuation)
Main fader closed 98 dB
Channel muted 85 dB
Channel fader muted 85 dB
Frequency response
Microphone input to main out
<10 Hz 90 kHz +0 dB / 1 dB
<10 Hz 160 kHz +0 dB / 3 dB
Stereo inputs
Channels 5/6, 7/8
Microphone input
Type XLR microphone connector,
electronically balanced
Impedance approx. 2.6 kW balanced
Gain range 0 dB to +40 dB
Max. input level +2 dBu
Stereo inputs
Type 2 x 1/4" TRS connector,
unbalanced
Impedance approx. 40 kW @ 0 dB Gain
Gain range 20 dB to +20 dB
Max. input level +22 dBu @ 0 dB Gain
Channels 9/10, 11/12
Type 2 x 1/4" TRS connector,
unbalanced
Impedance approx. 40 kW @ 0 dB Gain
Gain range 20 dB to +20 dB
Max. input level +22 dBu @ 0 dB Gain
CD/tape in
Type RCA connectors
Impedance approx. 10 kW
Max. input level +22 dBu
EQ mono channe s
L o w 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Low cut 80 Hz, 18 dB/oct.
EQ stereo channe s
L o w 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
MON/FX send
Type 1/4" TS connector, unbalanced
Impedance approx. 120 W
Max. output level +22 dBu
Aux returns
Type 1/4" TRS connector,
unbalanced
Impedance approx. 10 kW
Max. input level +22 dBu
Main outputs
Type XLR, electronically balanced
Impedance approx. 240 W balanced
/ 120 W unbalanced
Max. output level +28 dBu
Headphone output
Type 1/4" TRS connector, unbalanced
Max. output level +19 dBu / 150 W (+25 dBm)
CD/tape out
Type RCA connectors
Impedance approx. 1 kW
Max. output level +22 dBu
DSP Texas Instruments®
Converter 24 bit Sigma Delta,
64/128 times oversampling
Sampling rate 40 kHz
Main mix system data2
Noise
Main mix @ oo,
Channel fader oo 99 dB / 101 dB A weighted
Main mix @ 0 dB,
Channel fader oo 84 dB / 87 dB A weighted
Main mix @ 0 dB,
Channel fader @ 0 dB 80 dB / 82 dB A weighted
Power supp y
Mains Voltage 100 240 V~, 50 60 Hz
Power consumption 40 W
Fuse T 1.6 A H 250 V
Mains connection Standard IEC receptacle
Physica
Dimensions (H x W x D) approx. 97 mm (3 7/8") x
345 mm (13 18/32") x 334 mm
(13 5/32")
Weight (net) approx. 3.80 kg (8.38 lbs.)
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; E flat; all
channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far
right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.
