Behringer BASS GRAPHIC EQUALIZER BEQ700 User manual

Ultimate 7-Band Graphic Equalizer
Thank you for showing your condence in us by purchasing the BEHRINGER BASS GRAPHIC
EQUALIZER BEQ700. This ultimate eects pedal is specically designed to match the frequency range
of bass guitars. It allows 7-band sound shaping and feedback elimination from 50 Hz to 10 kHz. It has a
powerful 15 dB boost/cut per band, ideally suited even for 5-string and 6-string bass guitars.
1. Controls
(1) The 7-band EQ faders allow boosting/cutting single frequency ranges from 50 Hz to 10 kHz at ±15 dB.
(2) The LEVEL fader adjusts the output level. It can be used to achieve eective volume “boost” or “cut.”
(3) This LED illuminates when the EQ is activated. It also serves as a battery level indicator.
(4) Use the footswitch to activate/deactivate the EQ.
(5) Use this ¼" TS IN connector to plug in the instrument cable.
(6) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V
battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The BEQ700 has no on/o switch. As soon as you insert the jack into the in connector,
the BEQ700 begins running. When not using the BEQ700, remove the jack from the
in connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
(2)
(6)
(1) (3)
(5)
(4)
A50-00000-55332
BASS GRAPHIC EQUALIZER BEQ700

BASS GRAPHIC EQUALIZER BEQ700
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OFTHE
MUSIC GROUP (MUSIC-GROUP.COM). ALLTRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSONWHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION.THIS MANUAL IS COPYRIGHTED. NO PART OFTHIS MANUAL MAY BE REPRODUCED ORTRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE,WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers,Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In
Connector ¼" TS
Impedance 500 kΩ
Out
Connector ¼" TS
Impedance 1 kΩ
Power Supply
9 V𝌂, 100 mA regulated
BEHRINGER PSU-SB
PSU-SB-CN 220 VAC adaptor China
BEHRINGER
PSU-SB-EU 230 VAC adaptor Europe
BEHRINGER
PSU-SB-JP 100 VAC adaptor Japan
BEHRINGER
PSU-SB-SAA 240 VAC adaptor Australia
BEHRINGER
PSU-SB-UK 240 VAC adaptor UK
BEHRINGER
PSU-SB-UL 115 VAC adaptor USA
BEHRINGER
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.