Behringer FEEDBACK DESTROYER PRO DSP1100P User manual

www.behringer.com
Version 1.1 May 2000
Technical Specifications
ENGLISH
FEEDBACKDESTROYER®
PRO DSP1100P

2
DSP1100P
FEEDBACKDESTROYERPRO
Ultra-high performance 2-channel digital Feedback Destroyer / Parametric EQ powered by a 24-bit high-speed DSP
s20-bitA/DandD/Aconverterswith64/128timesoversamplingforultra-highheadroomandresolution
sAutomaticallyand “intelligently” searchesout and destroysup to 12frequencies per channel
s24fully programmable Parametric Filters that canbe set manually or viaMIDI
s“Set-and-forget”defaultsettingenablesimmediateandsuper-easyFeedbackDestroyerperformance
sSingle-Shot mode automatically searches and destroys feedback and locks the filter until you reset them
manually
sAutomodecontinuouslymonitors the mix, resetting programmed filters automatically
sManual mode allows for setting up to 2 x 12 fully parametric filters including Frequency, Bandwidth and
Gain
sSingle-Shot, Auto and Manual modes are assignable for each filter
sFree FEEDBACK DESTROYER software allows for total remote control via PC (download at
www.behringer.com)
sTwosoftwareenginesgiveyouindependentorcoupledfunctionsonleftandrightchannels
sInternal 24-bit processing with professional 46 kHz sampling rate
sServo-balancedInputsandOutputsongold-platedXLRandTRSJackconnectorsforhighsignalintegrity
sFull MIDI capability and user preset memories to store programs for instant recall
sAccurateeight-segmentLEDlevelmeterssimplifylevel setting for optimum performance
s“Future-proof”software-upgradeablearchitecture
sHigh-qualitycomponentsandexceptionally rugged construction ensures long life and durability
sInternalpowersupplydesignforprofessionalapplications
sManufacturedunderISO9000certifiedmanagementsystem

3
SPECIFICATIONS
AnalogInputs
Connectors XLR and 1/4" jack
Type RF filtered, servo balancedinput
Impedance 60kOhmsbalanced,30kOhmsunbalanced
NominalOperatingLevel -10 dBV to +4 dBu
Max.InputLevel +16 dBu at +4 dB nominal level, +2 dBV at -10 dBV nominal level
Analog Outputs
Connectors XLR and 1/4" jack
Type electronicallyservo-balancedoutputstage
Impedance 60Ohmsbalanced,30 Ohms unbalanced
Max.OutputLevel +16 dBu at +4 dB nominal level, +2 dBV at -10 dBV nominal level
Systemspecifications
Bandwidth 20 Hz to 20 kHz, -3 dB
Noise > 94 dB, unweighted, 20 Hz to 20 kHz
THD 0.0075 % typ. @ +4 dBu, 1 kHz, Gain 1
Crosstalk < -76 dB
MIDIInterface
Type 5-Pin-DIN-Socket IN /OUT / THRU
Digital Processing
Converters 20-bitSigma-Delta,64/128-timesoversampling
Sampling Rate 46.875 kHz
Display
Type 2 ½-digit numeric LED-Display
Power Supply
MainsVoltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
Generalexportmodel 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Fuse 100 - 120 V ~: T 125 mA H
200 - 240 V ~: T 63 mA H
PowerConsumption max. 15 Watts
MainsConnection StandardIECreceptacle
Physical
Dimensions (H * W * D) app. 1 3/4" (44.5 mm) * 19" (482.6 mm) * 7 1/2" (190.5 mm)
NetWeight app. 2 kg
ShippingWeight app. 3 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

4
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmit-
ted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose,
without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGERandFEEDBACKDESTROYERareregisteredtrademarks.ALLRIGHTSRESERVED.
©2000BEHRINGERSpezielle Studiotechnik GmbH.
BEHRINGERSpezielle Studiotechnik GmbH,Hanns-Martin-Schleyer-Str. 36-38,47877Willich-MünchheideII, Germany
Tel. [phone] / 92 06-0, Fax [phone] / 92 06-30