Beko CN160236XB User manual

CN160237W-CN160236XB-CN160241XB-CN160238W
EN/AR/HE
58 6248 0000/AD-EN-AR-HE
Refrigerator
User Manual
ררקמ

Dear Customer,
Please read this manual before using the product.
Thank you for choosing this product. We would like you to achieve the optimal efficiency
from this high quality product which has been manufactured with state of the art techno-
logy. To do this, carefully read this manual and any other documentation provided before
using the product and keep it as a reference.
Heed all information and warnings in the user manual. This way, you will protect yourself
and your product against the dangers that may occur.
Keep the user manual. Include this guide with the unit if you hand it over to someone else.
The following symbols are used in the user guide:
Hazard that may result in death or injury.
NOTICE A hazard that may cause material damage to the product or its
surroundings
Important information or useful tips on operation.
Read the user manual.
Risk of fire / Flammable materials
A
A
A
C
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
.The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/

2 /39 EN Refrigerator / User manual
1- Safety Instructions 3
2 Your appliance 8
3 Installation 9
3.1. Appropriate installation location . . . . . . . . . 9
3.2. Installing the plastic wedges. . . . . . . . . . . . 9
3.3. Electrical connection . . . . . . . . . . . . . . . . 10
3.4. Adjusting the feet. . . . . . . . . . . . . . . . . . . 10
3.5. Illumination lamp . . . . . . . . . . . . . . . . . . . 10
3.6. Door open warning. . . . . . . . . . . . . . . . . . 10
3.7. Transportation of the product . . . . . . . . . . 11
4 Preparation 12
4.1. Things to be done for energy saving . . . . . 12
4.2. Recommendations on the fridge
compartment. . . . . . . . . . . . . . . . . . . . . . 12
4.3. Initial use. . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Preparation 13
5 Using the product 14
5.1. Indicator panel. . . . . . . . . . . . . . . . . . . . . 14
5.2. Dual cooling system . . . . . . . . . . . . . . . . 20
5.3. Freezing fresh food . . . . . . . . . . . . . . . . . 20
5.4. Recommendations for preserving the frozen
food . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.5. Placement of food . . . . . . . . . . . . . . . . . . 21
5.6. Deep-freeze information. . . . . . . . . . . . . . 21
5.7. Ice machine. . . . . . . . . . . . . . . . . . . . . . . 22
5.8. Icematic . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.9. Ice container . . . . . . . . . . . . . . . . . . . . . . 23
5.10.Blue light/HarvestFresh . . . . . . . . . . . . . . 23
5.11.Egg holder. . . . . . . . . . . . . . . . . . . . . . . . 23
5.12. Description and cleaning of odor filter . . . 24
5.13. Snack compartment . . . . . . . . . . . . . . . . 24
5.14. Sliding storage container. . . . . . . . . . . . . 25
5.15. Rotary storage container . . . . . . . . . . . . . 25
5.16. Crisper . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.17.Using the water dispenser . . . . . . . . . . . . 27
5.18.Filling the water dispenser's tank . . . . . . . 27
5.19. Cleaning the water tank . . . . . . . . . . . . . 28
5.20. Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.21.Humidity-controlled crisper (Ever Fresh) . . 29
5.22. Quick bottle cooling/quick ice making
compartment. . . . . . . . . . . . . . . . . . . . . . 33
6 Maintenance and cleaning 36
7. Troubleshooting 37
Please read this user manual first!

3 /39 EN
Refrigerator / User manual
This section contains safety instructions that
will help get protected against risks of personal
injury or property damage.
Our company shall not be responsible for da-
mages that may arise when these instructions
are not followed.
A Installation and repair procedures
must always be performed by the manufacturer,
authorised service agent or a qualified person
specified by the importer.
A Only use original parts and
accessories.
A Original spare parts will be provided
for 10 years, following the product purchasing
date.
A Do not repair or replace any part of
the product unless specified expressly in the user
manual.
A Do not make any technical
modifications to the product.
A1.1 Intended Use
This product is not suitable for commercial use
and it must not be used out of its intended use.
This product is designed to be used in houses and
indoor places.
For example:
- Personnel kitchens in stores, offices and
other working environments,
- Farm houses,
- Areas used by customers at hotels, motels
and other types of accommodation,
- Bed&breakfast type hotels, boardinghouses,
- Catering and similar non-retail applications.
This product should not be used outdoors with or
without a tent above it such as boats, balconies or
terraces. Do not expose the product to rain, snow,
sun or wind.
There is the risk of fire!
A1.2 - Safety for children,
vulnerable persons and pets
This product can be used by children at and
above 8 years old and by persons with limited
physical, sensory or mental capabilities or who
lack experience and knowledge provided that
they are supervised or trained on the safe use
of the product and the risks it brings out.
Children aged from 3 to 8 years are allowed to
load and unload refrigerating products.
Electrical products are dangerous for children
and pets. Children and pets must not play with,
climb or enter the product.
Cleaning and user maintenance should not be
performed by children unless they are supervi-
sed by someone.
Keep packaging materials away from children.
There is the risk of injury and suffocation!
Before disposing of the old or obsolete product:
1. Unplug the product by gripping from the plug.
2. Cut the power cable and remove it from the
appliance together with its plug
3. Do not remove the shelves or drawers so that
it is harder for children to enter the product.
4. Remove the doors.
5. Keep the product in a way that it will not tip
over.
6. Do not allow children play with the old pro-
duct.
Never throw the product into fire for disposal.
There is the risk of explosion!
If there is a lock on the door of the product, the
key should be kept out of the reach of children.
1- Safety Instructions

Important instructions for safety and environment
4 /36EN Refrigerator/ User manual
A1.3 - Electrical safety
The product must be unplugged during ins-
tallation, maintenance, cleaning, repairing
and moving procedures.
If the power cable is damaged, it must be
replaced by a qualified person specified
by the manufacturer, authorised service
agent or importer in order to avoid potential
dangers.
Do not squeeze the power cable under or
behind the product. Do not place heavy ob-
jects on the power cable. Power cable must
not be bent excessively, pinched or get in
contact with any heat source.
Do not use extension cords, multi-sockets
or adapters to operate the product.
Portable multi-sockets or portable power
sources can overheat and cause fire.
Therefore, do not keep any multi-sockets
behind or near the product.
Plug must be easily accessible. If this is not
possible, the electrical installation to which
the product is connected must contain a
device (such as a fuse, switch, circuit bre-
aker, etc.) which conforms to the electrical
regulations and disconnects all poles from
the grid.
Do not touch the power plug with wet
hands.
Remove the plug from the socket by grip-
ping the plug and not the cable.
Do not touch the plug with wet hands.
When unplugging the appliance, don’t hold
the power cord, but the plug.
A1.4 - Transportation safety
Product is heavy; do not move it alone.
Do not hold its door when moving the pro-
duct.
Pay attention not to damage the cooling
system or the piping during transportation.
If the piping is damaged, do not operate
the product and call the authorised service
agent.
A1.5 - Installation safety
Call the authorised service agent for instal-
lation of the product. To make the product
ready for use, check the information in the
user manual to make sure that the elect-
ricity and water installations are suitable.
If they are not, call a qualified electrician
and plumber to have the necessary arran-
gements made. Otherwise, there is the risk
of electric shock, fire, problems with the
product, or injury!
Prior to installation, check if the product
has any defects on it. If the product is da-
maged, do not have it installed.
Place the product on a clean, flat and solid
surface and balance it with adjustable feet.
Otherwise, the product may tip over and
cause injuries.
The installation location must be dry and
well ventilated. Do not place carpets,
rugs or similar covers under the product.
Insufficient ventilation causes the risk of
fire!
Do not cover or block the ventilation ope-
nings. Otherwise, power consumption inc-
reases and your product may get damaged.
Product must not be connected to supply
systems such as solar power supplies.
Otherwise, your product may get damaged
due to sudden voltage changes!
The more refrigerant a refrigerator conta-
ins, the larger the installation location must
be. If the installation location is too small,
flammable refrigerant and air mixture will
accumulate in cases of refrigerant leakage
in cooling system. The required space for
each 8 gr of refrigerant is 1 m³minimum.
The amount of refrigerant in your product is
indicated on the Type Label.

Important instructions for safety and environment
5 /36EN
Refrigerator/ User manual
Product must not be installed in places
exposed to direct sunlight and it must be
kept away from heat sources such as hobs,
radiators, etc.
If it is inevitable to install the product close to
a heat source, a suitable insulation plate must
be used in between and the following minimum
distances must be kept to the heat source:
- Minimum 30 cm away from heat sources
such as hobs, ovens, heater units or stoves,
- Minimum 5 cm away from electric ovens.
Protection class of your product is Type I.
Plug the product in a grounded socket that
conforms the voltage, current and frequ-
ency values stated on the type label of the
product. The socket must be equipped with
a 10 A – 16 A circuit breaker. Our company
shall not be liable for any damages that
will arise when the product is used wit-
hout grounding and electrical connection
in accordance with the local and national
regulations.
Product must not be plugged in during
installation. Otherwise, there is the risk of
electric shock and injury!
Do not plug the product in sockets that
are loose, dislocated, broken, dirty, greasy
or bear the risk of getting in contact with
water.
Route the power cable and hoses (if any) of
the product in a way that they do not cause
risk of tripping over.
Exposing the live parts or power cable to
humidity may cause short circuit. Therefore,
do not install the product in places such as
garages or laundry rooms where humidity is
high or water may splash. If the refrigerator
gets wet with water, unplug it and call the
authorised service agent.
Never connect your refrigerator to energy
saving devices. Such systems are harmful
to your product.
A1.6- Operational safety
Never use chemical solvents on the pro-
duct. There is the risk of explosion!
If the product malfunctions, unplug it and
do not operate until it is repaired by the
authorised service agent. There is the risk
of electric shock!
Do not place flame sources (lit candles, ci-
garettes, etc.) on or close to the product.
Do not climb on the product. There is the
risk of falling and getting injured!
Do not damage the pipes of the cooling
system with sharp or penetrating objects.
The refrigerant that might come out when
the refrigerant pipes, pipe extensions or
surface coatings are punctured causes skin
irritations and eye injuries.
Unless recommended by the manufacturer,
do not place or use electrical devices inside
the refrigerator/deep freezer.
Be careful not to trap your hands or any
other part of your body in the moving parts
inside the refrigerator. Pay attention not to
squeeze your fingers between the door and
the refrigerator. Be careful when opening
and closing the door particularly if there are
children around.
Never eat ice cream, ice cubes or frozen
food right after removing them from the
refrigerator. There is the risk of frostbite!
When your hands are wet, do not touch the
inner walls or metal parts of the freezer or
the food stored therein. There is the risk of
frostbite!
Do not place tins or bottles that contain
carbonated drinks or freezable liquids in
the freezer compartment. Tins and bottles
may burst. There is the risk of injury and
material damage!
Do not place or use flammable sprays,
flammable materials, dry ice, chemical
substances or similar heat-sensitive mate-
rials near the refrigerator. There is the risk
of fire and explosion!

Important instructions for safety and environment
6 /36EN Refrigerator/ User manual
Do not store explosive materials that con-
tain flammable materials, such as aerosol
cans, in your product.
Do not place containers filled with liquid
onto the product. Splashing water on an
electrical part may cause electric shock or
the risk of fire.
This product is not intended for storing
medicines, blood plasma, laboratory pre-
parations or similar medical substances
and products subject to Medical Products
Directive.
Using the product against its intended pur-
pose may cause the products stored inside
it to deteriorate or spoil.
If your refrigerator is equipped with blue
light, do not look at this light with optical
tools. Do not stare at UV LED lamp directly
for a long time. Ultraviolet light may cause
eye strain.
Do not overload the product. Objects in the
refrigerator may fall down when the door is
opened, causing injury or damage. Similar
problems may arise if any object is placed
onto the product.
To avoid injuries, make sure that you have
cleaned all the ice and water that may have
fallen or splashed on the floor.
Change the position of the shelves/bottle
holders on the door of your refrigerator only
when they are empty. There is the risk of
injury!
Do not place objects that can fall down/tip
over onto the product. Such objects may
fall down when the door is opened and ca-
use injuries and/or material damage.
Do not hit or exert excessive force on glass
surfaces. Broken glass may cause injuries
and/or material damage.
Cooling system of your product contains
R600a refrigerant: Type of the refrigerant
used in the product is indicated on the
type label. This refrigerant is flammable.
Therefore, pay attention not to damage the
cooling system or the piping while the pro-
duct is in use. If the piping is damaged:
- Do not touch the product or the power
cable,
- Keep away potential sources of fire that
may cause the product to catch fire.
- Ventilate the area where the product is
located. Do not use fans.
- Call the authorised service agent.
If the product is damaged and you see
refrigerant leak, please stay away from the
refrigerant. Refrigerant may cause frostbite
in case of skin contact.
For products with a Water Dispenser/Ice
Machine
Use only potable water. Do not fill the
water tank with any liquids -such as
fruit juice, milk, carbonated beverages
or alcoholic drinks- that are not suitable
for use in the water dispenser.
There is the risk for health and safety!
Do not allow children play with the wa-
ter dispenser or ice machine (Icematic)
in order to prevent accidents or injuries.
Do not insert your fingers or other
objects into the water dispenser hole,
water channel or ice machine container.
There is the risk of injury or material
damage!
A1.7- Maintenance
and cleaning safety
Do not pull from the door handle if you
need to move the product for cleaning pur-
poses. Handle may break and cause injuri-
es if you exert excessive force on it.
Do not spray or pour water on or inside the
product for cleaning purposes. There is the
risk of fire and electric shock!

Important instructions for safety and environment
7 /36EN
Refrigerator/ User manual
Do not use sharp or abrasive tools when
cleaning the product. Do not use household
cleaning products, detergent, gas, gasoline,
thinner, alcohol, varnish etc.
Only use cleaning and maintenance pro-
ducts inside the product that are not harm-
ful for food.
Never use steam or steam assisted clea-
ners to clean or defrost the product. Steam
gets into contact with the live parts in your
refrigerator, causing short circuit or electric
shock!
Make sure that no water enters the elect-
ronic circuits or lighting elements of the
product.
Use a clean and dry cloth to wipe the fo-
reign materials or dust on the pins of the
plug. Do not use a wet or damp cloth to
clean the plug. There is the risk of fire and
electric shock!
A1.8- HomeWhiz
When you operate your product through
HomeWhiz application, you must observe
the safety warnings even when you are
away from the product. You must also fol-
low the warnings in the application.
A1.9- Lighting
Call the authorised service when it is re-
quired to replace the LED/bulb used for
lighting.

8 /39 EN Refrigerator / User manual
*5
*6
*3
4
7
8
10*11 *12
13
*14 *
15
16
17
18
19
9
*1
*2
1. Door shelves of fridge compartment
2. Display
3. Water dispenser filling tank
4. Egg section
5. Water dispenser reservoir
6. Rotary storage container
7. Freezer compartment drawers
8. Icematic drawer
9. Icematic
10. Crisper
11. Water tank
12. Crisper
13. Chiller compartment
14. Bottle shelf
15. Odor filter
16. Glass shelves of fridge compartment
17. Fan
18. Glass shelves of fridge compartment
19. Freezer compartment
*optional
2Your appliance
C*optional:Figures in this user manual are given as an example and may not match the product
exactly. If the relevant parts are not available in the product you purchased, the figure applies to other
models.

9 /39 EN
Refrigerator / User manual
3Installation
Always have the installation and repairing
procedures carried out by the Authorized Service
Agent. Manufacturer shall not be held liable for
damages that may arise from procedures carried
out by unauthorized persons.
Refer to the nearest Authorized Service Agent for
installation of the product. To make the product
ready for use, make sure that the electricity
installation is appropriate before calling the
Authorized Service Agent. If not, call a qualified
electrician to have any necessary arrangements
carried out.
C
Preparation of the location and electrical
installation at the place of installation is
under customer's responsibility.
B
Product must not be plugged in during
installation. Otherwise, there is the risk
of death or serious injury!
B
WARNING: Installation and electrical
connections of the product must be
carried out by the Authorised Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorised
persons.
A
WARNING: Prior to installation, visually
check if the product has any defects
on it. If so, do not have it installed.
Damaged products cause risks for your
safety.
CMake sure that the power cable is not
pinched or crushed while pushing the
product into its place after installation or
cleaning procedures.
3.1. Appropriate installation location
A
WARNING: If the door of the room where
the product will be placed is too small for
the product to pass, then the product's
doors must be removed and the product
must be turned aside to pass it through.
product comfortably.
heat sources such as hobs, ovens, heater
cores and stoves and at least 5 cm away from
electrical ovens. Product must not be subjected
to direct sun light and kept in humid places after
installation.
function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
clearance between the product and the ceiling,
rear wall and the side walls.
remember to leave at least 5 cm clearance
between the product and the ceiling, rear wall and
the side walls. Check if the rear wall clearance
protection component is present at its location (if
provided with the product). If the component is
not available, or if it is lost or fallen, position the
product so that at least 5 cm clearance shall be
left between the rear surface of the product and
the wall of the room. The clearance at the rear is
important for efficient operation of the product.
rugs or carpets.
prevent jolts.
temperature falls below 10°C.
C
If two coolers are to be installed side
by side, there should be at least 8 cm
distance between them. Otherwise,
adjacent side walls may get damp.
3.2. Installing the plastic wedges
Plastic wedges are used to create the distance
for the air circulation between the product and
the rear wall. Insert the 2 plastic wedges onto the
rear ventilation cover as illustrated in the figure.
To install the wedges, remove the screws on the
product and use the screws given in the same
pouch with the wedges.

Installation
10 /36EN Refrigerator/ User manual
3.3. Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values
in the rating plate. Our company shall not be
liable for any damages that will arise when
the product is used without grounding in
accordance with the local regulations.
national regulations.
after installation.
protection are specified in the Rating Plate
which is affixed to interior of the product. If
the current value of the fuse or breaker in
the house does not comply with the value in
the rating plate, have a qualified electrician
install a suitable fuse.
mains voltage.
cables or multi-plugs.
BWARNING: Damaged power cable
must be replaced by the Authorized
Service Agent.
B
WARNING: If the product has a
failure, it should not be operated
unless it is repaired by the
Authorised Service Agent! There is
the risk of electric shock!
3.4. Adjusting the feet
If the product stands unbalanced after
installation adjust the feet. Taking help from
someone to slightly lift the product will facilitate
this process.
BWARNING: First unplug the product.
Product must not be plugged in when
adjusting the feet. There is the risk of
electric shock!
Turn the front feet to balance the product. The
corner where the foot exists is lowered when
you turn in the direction of arrow and raised
when you turn it in the opposite direction.
3.5. Illumination lamp
Do not attempt to repair yourself but call the
Authorized Service Agent if the illumination
lamps do not go on or are out of order.
The lamp(s) used in this appliance is not
suitable for household room illumination. The
intended purpose of this lamp is to assist the
user to place foodstuffs in the refrigerator/
freezer in a safe and comfortable way.
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute.
This warning will be muted when the door is
closed or any of the display buttons (if any) are
pressed.

Installation
11 /36EN
Refrigerator/ User manual
3.7. Transportation of the product
1.
Unplug the product before transporting it.
2.
Clean the interior of the product as
recommended in the “Maintenance and
cleaning” section.
3.
Secure the shelves, accessories, crisper and
etc. in the product by adhesive tape before
repackaging it.
CPackaging must be tied with thick
tapes or strong ropes and the rules of
transportation printed on the package
must be followed.
COriginal packaging and foam
materials should be kept for future
transportations.
APackaging materials are dangerous
for the children. Keep packaging
materials
in a safe place away
from reach of the children.

12 /39 EN Refrigerator / User manual
4.1. Things to be done for energy
saving
AConnecting the product to electric energy
saving systems is risky as it may cause
damage on the product.
For a freestanding appliance; ‘this refrigerating
appliance is not intended to be used as a built-in
appliance’ ;
Do not leave the doors of your product open for
a long time.
Do not put hot food or drinks in your product.
Do not overload the product. Cooling capacity
will fall when the air circulation inside is
hindered.
Do not place the product in places subject to
direct sunlight. Install the product at least 30 cm
away from heat sources such as hobs, ovens,
heater cores and stoves and at least 5 cm away
from electrical ovens.
Store your food in product in closed containers.
You can load maximum amount of food to
the freezer compartment of the product by
removing the freezer compartment shelf of
drawer. Declared energy consumption value of
the product was determined with the freezer
compartment shelf or drawer removed and with
maximum amount of food loaded. There is no
risk in using a shelf or drawer suitable for the
shapes and sizes of the foods to be frozen.
Thawing frozen food in fridge compartment will
both provide energy saving and preserve the
food quality.
Since hot and humid air will not directly
penetrate into your product when the doors are
not opened, your product will optimize itself
in conditions sufficient to protect your food.
Functions and components such as compressor,
fan, heater, defrost, lighting, display and so on
will operate according to the needs to consume
minimum energy under these circumstances.
In case of multiple options are present glass
shelves must be placed so that the air outlets
at the backwall are not blocked, prefably air
outlets are remaining below the glass shelf. This
combination may help impoving air distribution
and energy efficiency.
CThe ambient temperature of the room
where you install the product should at
least be -5°C. Operating your product
under cooler conditions than this is not
recommended.
CInside of your product must be cleaned.
CIf two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
4.2. Recommendations on the fridge
compartment
Do not allow the food to touch the temperature
sensor in fridge compartment. To allow the
fridge compartment keep its ideal storage
temperature, sensor must not be hindered by
food.
The baskets/drawers that are provided with the
chill compartment must always be in use for
low energy consumption and for better storage
conditions.
4Preparation

13 /39 EN
Refrigerator / User manual
Food contact with the temperature sensor in
the freezer compartment may increase energy
consumption of the appliance. Thus any
contact with the sensor(s) must be avoided.
Do not put hot food and beverages inside the
product.
4.3. Initial use
Before starting to use the product, check that all
preparations are made in accordance with the
instructions in sections "Important instructions for
safety and environment" and "Installation".
Clean the interior of the product as
recommended in the “Maintenance and
cleaning” section. Check that inside of it is dry
before operating it.
Plug the product into the grounded wall
outlet. When the door is opened the interior
illumination will turn on.
Run the product without putting any food for 6
hours and do not open its door unless certainly
required.
CYou will hear a noise when the compressor
starts up. The liquids and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
CFront edges of the product may feel warm.
This is normal. These areas are designed
to be warm to avoid condensation.
CIn some models, the instrument panel
automatically turns off 5 minutes after
the door has closed. It will be reactivated
when the door has opened or pressed on
any key.
4Preparation

14 /39 EN Refrigerator / User manual
5.1. Indicator panel
Indicator panels may vary according to the product model.
Audio – visual functions on the indicator panel helps you in using your product.
C*Optional: Figures in this user manual are given as an example and may not match the product
exactly. If the relevant parts are not available in the product you purchased, the figure applies to other
models.
5Using the product
45
76
*8
9
123
1. Fridge Compartment Indicator
2. Error status indicator
3. Temperature indicator
4. Vacation function button
5. Temperature setting button
6. Compartment selection button
7. Freezer compartment indicator
8. Economy mode indicator
9. Vacation function indicator
*optional

15 /39 EN
Refrigerator / User manual
5 Using the product
6. Compartment selection button
Selection button: Press compartment selection
button to switch between fridge and freezer
compartments.
7. Freezer compartment indicator
Fridge compartment light is illuminated while the
freezer compartment temperature is set.
8. Economy mode indicator
Indicates that the refrigerator operates in energy
saving mode. This display shall be activated if the
freezer compartment temperature is set to -18°C.
9. Vacation function indicator
Indicates that vacation is activated.
1. Fridge compartment indicator
Fridge compartment light is illuminated while the
fridge compartment temperature is set.
2. Error status indicator
If your refrigerator does not perform enough
cooling or in case of a sensor fault, this indicator
is activated. When this indicator is activated, “E” is
displayed on the freezer compartment temperature
indicator, and numbers such as “1,2,3...” are
displayed on the fridge compartment temperature
indicator. These numbers on the indicator inform
service personnel about the error.
3. Temperature indicator
Indicates freezer, fridge compartment temperature.
4. Vacation function button
Press on Vacation Button for 3 seconds to
activate this function. When the vacation function
is activated, “- -” is displayed on the fridge
compartment temperature indicator and no active
cooling is performed on the fridge compartment.
It is not suitable to keep the food in the fridge
compartment when this function is activated. Other
compartments shall be continued to be cooled as
per their set temperature.
To cancel this function press Vacation button
again.
5. Temperature setting button
Changes the temperature of the relevant
compartment between -24°C... -18°C and
8°C...1°C.

16 /39 EN Refrigerator / User manual
5 Using the product
C*Optional: Figures in this user manual are given as an example and may not match the product
exactly. If the relevant parts are not available in the product you purchased, the figure applies to other
models.
1. Fridge compartment temperature setting button
2. Key lock button
3. Freezer compartment temperature setting button
4. Error status indicator
5. Key lock indicator
6. Eco Extra Function Indicator
7. Eco Extra / Vacation Button
8. Vacation function indicator
9. Icematic Off Indicator
(*In some models)
10. Economic usage indicator
11. Quick freeze function indicator
12. Quick freeze function button/ Icematic on-off button
13. Freezer compartment temperature indicator
14. Quick cool function
15. Fridge Compartment Temperature indicator
16. Quick cooling function indicator
*optional
1
3
2
4
5
6
10
9*
8
7
11
12
13
15
14
16

Using your appliance
17 /36EN
Refrigerator/ User manual
1. Fridge compartment temperature setting
button
Press this button to set the temperature of the
fridge compartment to 8, 7,6, 5,4,3, 2, 8...
respectively. Press this button to set the fridge
compartment temperature to the desired value.
2. Key lock button
Pressing and holding this button for 3 seconds
will activate the key lock function and the key
lock indicator will turn on. Pressing and holding
this button again for 3 seconds will deactivate
the key lock function.
3. Freezer compartment temperature setting
button
Press this button to set the temperature of the
freezer compartment to -18,-19,-20,-21, -22,
-23,-24, -18... respectively. Press this button
to set the freezer compartment temperature to
the desired value.
4. Error status indicator
If your product does not perform enough
cooling or in case of a sensor fault, this
indicator is activated.
When this indicator is activated, “E” is
displayed on the freezer compartment
temperature indicator, and numbers such
as “1,2,3...” are displayed on the fridge
compartment temperature indicator. The
numbers on the indicator inform service
personnel about the error.
CWhen you place hot food into the
freezer compartment or if you leave
the door open for a long time, an
exclamation mark can be displayed for
some time. This is not a failure; this
warning will disappear when the food
cools down.
5. Key lock indicator
Use this function if you want to prevent
changing of the temperature setting of the
product. To activate it press and hold fridge
compartment temperature setting button and
freezer compartment temperature setting
button simultaneously for 3 seconds.
6. Eco extra function ındicator
Indicates that the Eco Extra function is active.
If this function is active, your product will
automatically detect the least usage periods
and energy-efficient cooling will be performed
during those times.
CEconomy indicator will be active while
energy-efficient cooling is performed.
CPress the relevant button to disable the
function.
7. Eco extra / Vacation button
Pressing this button briefly will activate the
Eco Extra function. Pressing and holding this
button for 3 seconds will activate the Vacation
function. Pressing this button again will
deactivate the selected function.
8. Vacation function indicator
Indicates that the Vacation Function is active.
When this function is active “- -“ appears on
the Fridge Compartment Temperature indicator
and no cooling is performed in the fridge
compartment. Other compartments will be
cooled in accordance with the temperature set
for them.
CPress the relevant button to disable the
function.
9. Icematic off indicator
Indicates whether the icematic is on or off.
If On, then the icematic is not operating. To
operate the icematic again press and hold the
On-Off button for 3 seconds.

Using your appliance
18 /36 EN Refrigerator/ User manual
CWater flow from water tank will stop
when this function is selected. However,
ice made previously can be taken from
the icematic.
10. Economic usage indicator
Indicates that the product is running in
energy-efficient mode. This indicator will
be active if the Freezer Compartment
temperature is set to -18 or the energy
efficient cooling is being performed due to
Eco-Extra function.
CEconomic usage indicator is turned
off when quick cooling or quick freeze
functions are selected.
11. Quick freeze function indicator
Flashes in an animated style to indicate that
the Quick Freeze function is enabled.
12. Quick freeze function button/ Icematic
on-off button
Press this button to activate or
deactivate the quick freezing function.
When you activate the function, the
freezer compartment will be cooled to a
temperature lower than the set value.
To turn on and off the icematic press and
hold it for 3 seconds.
CUse the quick freeze function when
you want to quickly freeze the food
placed in fridge compartment. If
you want to freeze large amounts
of fresh food, activate this function
before putting the food into the
product.
CIf you do not cancel it, Quick Freeze
will cancel itself automatically
after 24 hours or when the fridge
compartment reaches to the
required temperature.
CThis function is not recalled when
power restores after a power failure.
13. Freezer compartment temperature indicator
Indicates the temperature set for freezer
compartment.
14. Quick cool function
The button has two functions. To activate or
deactivate the quick cool function press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.
CUse quick cooling function when you
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
CIf you do not cancel it, quick cooling
will cancel itself automatically after 1
hours or when the fridge compartment
reaches to the required temperature.
CIf you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
CThis function is not recalled when
power restores after a power failure.
15. Fridge compartment temperature indicator
Indicates the temperature set for Fridge
compartment.
16. Quick cooling function indicator
Flashes in an animated style to indicate that the
Quick Cooling function is enabled.

Using your appliance
19 /36EN
Refrigerator/ User manual
Sabbath Mode:*optional
Press the Quick Cool Button for 3 seconds
to activate or deactivate the Sabbath Mode.
When Sabbath Mode is activated, the display,
alarm, door opening or light buttons will not
function:
If the user does not deactivate the Sabbath mode,
the refrigerator will automatically cancel it in 76
hours.
This manual suits for next models
3
Table of contents
Languages:
Other Beko Refrigerator manuals

Beko
Beko GN1306230ZDX User manual

Beko
Beko BFBF3018SS User manual

Beko
Beko CN 152220 T User manual

Beko
Beko GN1416221XP User manual

Beko
Beko GN162341XBN User manual

Beko
Beko CF1100AP User manual

Beko
Beko DS132010 User manual

Beko
Beko 7298248713 User manual

Beko
Beko RSSE445K21X User manual

Beko
Beko GN163120X User manual

Beko
Beko RSSE265K20W User manual

Beko
Beko DSE 25006S User manual

Beko
Beko RCNE365E45W User manual

Beko
Beko B5RCNE66HXP User manual

Beko
Beko RDNT550 Series User manual

Beko
Beko DN151120DW Assembly instructions

Beko
Beko CS 232030 User manual

Beko
Beko RFNE 290L33W User manual

Beko
Beko BSSA300M3SN Instruction Manual

Beko
Beko KG110 User manual