
5/ EN Washing Machine / User’s Manual
2 Installation
Refer to the nearest Authorised Service Agent for installation
of the product. To make the product ready for use, review
the information in the user manual and make sure that the
electricity, tap water supply and water drainage systems are
appropriatebeforecallingtheAuthorizedServiceAgent.If
theyarenot,callaqualifiedtechnicianandplumbertohave
any necessary arrangements carried out.
CPreparationofthelocationandelectrical,tapwaterand
waste water installations at the place of installation is
undercustomer'sresponsibility.
Make sure that the water inlet and discharge hoses
aswellasthepowercablearenotfolded,pinchedor
crushed while pushing the product into its place after
installation or cleaning procedures.
BWARNING: Installationandelectricalconnections
oftheproductmustbecarriedoutbytheAuthorized
ServiceAgent.Manufacturershallnotbeheldliablefor
damagesthatmayarisefromprocedurescarriedoutby
unauthorized persons.
AWARNING:Priortoinstallation,visuallycheckif
theproducthasanydefectsonit.Ifso,donothaveit
installed.Damagedproductscauserisksforyoursafety.
2.1 Appropriate installation location
• Placethemachineonarigidfloor.Donotplaceitona
long pile rug or similar surfaces.
• Totalweightofthewashingmachineandthedryer-with
full load- when they are placed on top of each other
reachestoapprox.180kilograms.Placetheproduct
on a solid and flat floor that has sufficient load carrying
capacity!
• Donotplacetheproductonthepowercable.
• Donotinstalltheproductatplaceswheretemperature
mayfallbelow0ºC.
• Placetheproductatleast1cmawayfromtheedgesof
other furniture.
• DonotplaceheatsourcessuchasHobs,Irons,Ovens,
etc. on the washing machine and do not use them on the
product.
2.2 Removing packaging reinforcement
Tiltthemachinebackwardstoremovethepackaging
reinforcement.Removethepackagingreinforcementby
pullingtheribbon.
2.3 Removing the transportation locks
AWARNING: Donotremovethetransportationlocks
beforetakingoutthepackagingreinforcement.
WARNING: Removethetransportationsafetybolts
beforeoperatingthewashingmachine!Otherwise,the
productwillbedamaged.
1.Loosenalltheboltswithasuitablespanneruntilthey
rotate freely.
2.Removetransportationsafetyboltsbyturningthemgently.
3.AttachtheplasticcoverssuppliedintheUserManualbag
into the holes on the rear panel.
C
Keepthetransportationsafetyboltsinasafeplaceto
reusewhenthewashingmachineneedstobemoved
again in the future.
Never move the product without the transportation safety
boltsproperlyfixedinplace!