BEKOMAT 32iU User manual

EN
BEKOMAT®32iU
01-4209
Original installation and operation manual
> BM32iU

Table of contents
1. Notes about the documentation.....................................................................................................5
1.1 Contact ......................................................................................................................................5
1.2 Information about this installation and operation manual.....................................................5
2. Safety................................................................................................................................................6
2.1 Use .............................................................................................................................................6
2.1.1 Intended use.......................................................................................................................................6
2.1.2 Reasonably foreseeable inappropriate use................................................................................. 7
2.2 Responsibility of the operating company ................................................................................7
2.3 Target group and personnel......................................................................................................8
2.4 Explanation of the safety symbols used...................................................................................9
2.5 Safety and warning notices.................................................................................................... 10
2.5.1 Safe operation..................................................................................................................................10
2.5.2 Pressurised systems .......................................................................................................................10
2.5.3 Electric voltage ................................................................................................................................11
2.5.4 Transport and storage....................................................................................................................11
2.5.5 Installation........................................................................................................................................11
2.5.6 Maintenance ....................................................................................................................................12
2.5.7 Handling hazardous substances..................................................................................................12
2.5.8 Use of spare parts, accessories or materials ............................................................................13
2.6 Warning notices ..................................................................................................................... 13
3. Product information ..................................................................................................................... 14
3.1 Product overview ................................................................................................................... 14
3.2 Exploded drawing................................................................................................................... 15
3.3 Function description .............................................................................................................. 16
3.4 Modbus function .................................................................................................................... 17
3.4.1 Default interface parameters.......................................................................................................17
3.4.2 Byte sequence..................................................................................................................................17
3.4.3 Implemented functions .................................................................................................................17
3.4.3.1 Read Input Registers (0x04) ........................................................................................18
3.4.3.2 Read Device Identication (0x2B / 0x0E).................................................................19
3.4.3.3 Changing interface parameters ..................................................................................20
3.4.3.4 Error messages................................................................................................................21
3.5 Type plate ............................................................................................................................... 21
3.6 Scope of delivery ................................................................................................................... 22
BEKOMAT®32iU Original installation and operation manual
2 | 68

4. Technical data ............................................................................................................................... 23
4.1 Operating parameters ........................................................................................................... 23
4.2 Storage and transportation parameters ............................................................................... 24
4.3 Materials................................................................................................................................. 24
4.4 Dimensions............................................................................................................................. 24
4.5 Screw fastening torques ........................................................................................................ 25
4.6 Installation dimensions.......................................................................................................... 25
4.7 Terminal diagram ................................................................................................................... 26
5. Transport and storage................................................................................................................... 27
5.1 Transport ................................................................................................................................ 27
5.2 Storage.................................................................................................................................... 27
6. Assembly ....................................................................................................................................... 28
6.1 Warning notices ..................................................................................................................... 28
6.2 Assembly conditions .............................................................................................................. 29
6.3 Assembly work ....................................................................................................................... 31
7. Electrical installation .................................................................................................................... 34
7.1 Warning notices ..................................................................................................................... 34
7.2 Connection work .................................................................................................................... 35
7.2.1 Single device connection...............................................................................................................36
7.2.2 Connecting multiple Modbus devices (series connection)...................................................38
8. Commissioning.............................................................................................................................. 40
8.1 Warning notices ..................................................................................................................... 40
8.2 Commissioning work.............................................................................................................. 41
9. Operation ...................................................................................................................................... 42
9.1 Warning notices ..................................................................................................................... 42
9.2 Operating states .................................................................................................................... 43
10. Maintenance ............................................................................................................................... 45
10.1 Warning notices ................................................................................................................... 45
10.2 Maintenance schedule......................................................................................................... 46
10.3 Maintenance work ............................................................................................................... 46
10.3.1 Changing the Service-Unit .........................................................................................................46
10.3.2 Functional test...............................................................................................................................52
10.3.3 Visual inspection...........................................................................................................................52
10.3.4 Leakage test...................................................................................................................................52
10.3.5 Cleaning ..........................................................................................................................................53
Original installation and operation manual BEKOMAT®32iU
3 | 68

Table of contents
11. Consumables, accessories and spare parts................................................................................ 54
11.1 Order information................................................................................................................ 54
11.2 Accessories........................................................................................................................... 54
11.3 Spare parts............................................................................................................................ 55
12. Decommissioning ....................................................................................................................... 56
12.1 Warning notices ................................................................................................................... 56
12.2 Decommissioning work ....................................................................................................... 57
13. Dismantling................................................................................................................................. 58
13.1 Warning notices ................................................................................................................... 58
13.2 Dismantling work................................................................................................................. 58
14. Disposal....................................................................................................................................... 60
14.1 Warning notices ................................................................................................................... 60
14.2 Disposal of operational materials and components........................................................... 61
15. Troubleshooting.......................................................................................................................... 62
16. Appendices.................................................................................................................................. 63
16.1 Approval certicates and declarations of conformity........................................................ 63
16.2 Declaration of Conformity................................................................................................... 64
17. Notes ........................................................................................................................................... 66
BEKOMAT®32iU Original installation and operation manual
4 | 68

1. Notes about the documentation
This documentation contains all the necessary steps for use of the product and the accessories.
1.1 Contact
Manufacturer Customer service and tools
BEKO TECHNOLOGIES GmbH
Im Taubental 7 | 41468 Neuss
Tel. + 49 2131 988 - 1000
[email protected]om
www.beko-technologies.com
BEKO TECHNOLOGIES GmbH
Im Taubental 7 | 41468 Neuss
Tel. + 49 2131 988 - 1000
[email protected]
www.beko-technologies.com
INFORMATION Country-specic manufacturer representation
i
You can contact the country-specic manufacturer's representative via the address listed
in the address section on the rear cover or by using the contact form on the manufacturer's
website.
1.2 Information about this installation and operation manual
INFORMATION Copyright protection!
i
The contents of the installation and operation manual in the form of text, gures,
illustrations, photographs, technical drawings, diagrams and other representations are
protected by the copyright of the manufacturer. This applies especially to duplication,
reproduction, microlming and storage as well as processing in electronic systems.
Publication date Revision Version Reason for amendment Scope of amendment
18 May 2021 01 00 Editorial revision Spelling mistakes corrected and
spare part information added
30 June 2021 02 00 Change in technical data Change in technical data
08 Octobre 2021 03 00 Change of housing class Chapter 3.5 and 4.1
The installation and operation manual, hereinafter referred to as the manual, must always be kept close to the product
and be in a permanently legible condition.
The manual must be handed over along with the product if it is sold or passed on.
NOTE Follow the instructions given in the manual!
This manual contains all the basic information required for safe operation of the product and
must be read before any actions are performed. Otherwise personal and material hazards as well
as malfunction and device failure are possible.
Original installation and operation manual BEKOMAT®32iU
5 | 68