Belair BOP 1 User manual

SHEETS:
Cover Sheet 1.
Loft Bed Assembly 2.
Single Bed Assembly 3.
Stair Assembly 4.
Unit Assembly 5.
TWO PEOPLE ARE RECOMMENDED
FOR THE ASSEMBLY OF THIS UNIT.
Always lay components on a
clean soft-cushioned surface
during assembly.
Ensure all hardware are accounted
for before starting assembly.
BOP 1
Assembly Instructions

4
2
15
6
A
B
A
B
B
A
6
5
A
B
M
Use covers caps (M) to
cover metal dowels (B)
on top rails only.
7
73
C
C
Tools Required:
Allen Key (provided) •
Flat Head Screwdriver •
Electric Drill •
#2 Robertson Driver Bit •
Chicago bolts (A) and metal dowels (B) are pre-inserted into rails with an extra set in the hardware package. •
Assemble loft bed as shown below for a LEFT hand configuration. For a RIGHT hand configuration switch Head End (1) and Foot End (2) . •
1 Head End 1 Foot End 1 Mattress Support
1 Back Panel 2 Rail 2 Rail with Support 2 Cross Support
20+1
Chicago Bolt
20+1
Metal Dowel
8
Cover Cap
1
Allen Key
12
Screw
A B C M S
1 2 3 4 5 6 7
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5 STEP 6
BOP 1
Loft Bed Assembly

8
Chicago Bolt
A
8
Metal Dowel
B
8
1.5" Screw
C
3
2 Side Panel
1
1 Head End
2
1 Foot End
3 Glide Support
5
1 Middle Support
4
6
Small L Bracket
I
10 Bed Slat
6
10
Wood Dowel
L
60
5/8" Screw
F
H
12
Large L Bracket
3
3
5
5
5
1
L
F
H
A
B
4
2
6
L
A
B
F
I
C
STEP 1 STEP 3STEP 2
STEP 4 STEP 5
Tools Required:
Allen Key (provided) •
Flat Head Screwdriver •
Electric Drill •
# 1 Robertson Drill Bit •
# 2 Robertson Drill Bit •
BOP 1
Single Bed Assembly

1 Staircase Gable
Left Hand Configuration
Right Hand Configuration
1
A
B
M
N
2
Chicago Bolt
2
Metal Dowel
16
Washer Head
Screw
4
Cover Cap
1
Tools Required:
Allen Key (provided) •
Flat Head Screwdriver •
Electric Drill •
#2 Robertson Driver Bit •
N
A
M B
Remove all drawer boxes and secure staircase gable (1) as shown below. •
For a LEFT hand configuration attach gable to the LEFT side of the stairs. For a RIGHT hand configuration attach staircase gable to the RIGHT side of the stairs. •
Extra 8 screws (N) are for securing the staircase to the loft bed. •
STEP 1 STEP 2
Stair
BOP 1
Stair Assembly

Staircase
Loft Bed
Single Bed
Left Hand Configuration
Right Hand Configuration
N
STEP 1
Line staircase up with bed, ensure the back of the staircase does not sit •
on the Chicago Bolts. Attach staircase to bed with screws as shown
below.
Tools Required:
Electric Drill •
#2 Robertson Driver Bit •
BOP 1
Unit Assembly