6
VIDEO CAPTURE QUICK START
1. Launch VideoStudio.
2. Select “Start” from the command bar on top of the VideoStudio
display screen.
3. Click the “New Project” icon then select a capture template from the
template list. For this example we’ll choose “NTSC VCD”.
4. Click “OK” to complete the capture template selection process and
move to the “Capture” screen.
5. Make sure that “Hi-Speed USB 2.0 DVD Creator” is displayed in the
driver window found on the left-hand side of the VideoStudio display
screen.
6. Start your video source. The source material should now be displayed
in the VideoStudio preview window. If the source material includes an
audio track, you should also hear audio at this time.
7. When you wish to begin capturing the source material, click the
“Capture Video” icon found in the upper left-hand corner of the
VideoStudio display screen.
Important Note: During the video-capture process, microprocessor priority
is given to recording of the source material. Video
displayed in the preview window may appear jerky with
horizontal imperfections. The final rendered movie clip
will not display these imperfections.
8. Click the “Capture Video” icon a second time when you wish to
terminate the capture process.
9. A movie icon will now appear in the filmstrip located on the bottom
of the VideoStudio display screen. Double-click the movie icon to
open your movie clip in the VideoStudio preview window.
P74200ea_F5U228ea_uk 02-04-2003 16:16 Page 6
