3/4
4
MHP
MLP
HP
MP
LP
MHP
HP
MP
LP
MLP
4/4
1.
The Lowest position is the safest, the base should always be used in that position as soon as the baby is old enough to sit up.
2.
Do not leave anything In the cot or place the cot close to another product, which could provide a foothold or present a danger o f
suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
3.
In the cots with drop side– If you leave your child unattended always check if the drop side is in the highest position.
4.
In the cots with removable dowels, always remove three dowels when your child can crawl.
5.
In the cots with drawers and removable dowels, after removing dowels, always remember that drawer should be closed.
6.
Do not place your cot in the close proximity of an open fire and other sources of heat, such as radiators electric or gas fires.
7.
The thickness of the mattress shall be such that the internal height (surface of the mattress to the upper edge of the cot frame) is at
least 500 mm in the lowest position of the cot base and at least 200 mm in the highest position of the cot base.
8.
The mattress should not be thicker than 100 mm.
9.
The mattress should be no more than 30 mm shorter or narrower than the internal length or width of the cot.
10.
All assembly fittings should be tightened properly and care should be taken to ensure that no screws are loose, a child could trap parts
of the body, or clothing (e.g. ribbons, drawstrings, necklaces) this could pose a risk of strangulation.
11.
Regularly check that all fittings and components of the cot are fully tightened and in working order.
12.
Do not use the cot if any part is broken, torn or missing.
13.
Should use only spare parts approved by the manufacturer.
“IMPORTANT,
RETAIN FOR FUTURE REFERENCE”
READ CAREFULLY
EN
maksimum height of upper surface of mattress
in lowest level of mattress base
highest level
medium level
lowest level
of mattress base
of mattress base
of mattress base
maksimum height of upper surface of mattress
in highest level of mattress base
