Belling BC582SSWF User manual

User Manual
Model:BC582SSWF
Refrigerator-Freezer

1

ng wire.
Left
Before adjusting the height of the door, rotate the downward adjusting
nut clockwise (as shown in Figure I) for 2 circles with a wrench,
and loosen the downward adjusting nut. Rotate the upward adjusting nut
(as shown in Figure I) to adjust the height, and then tighten the downward
adjusting nut counterclockwise again.
1.When the door of refrigerating chamber is low:
Open the door, use the accompanying wrench to rotate the upward adjusting
nut counterclockwise according to the method as shown in Figure I, to move
it upward until it is parallel and level.
2.When the door of refrigerating chamber is high:
Open the door, use the accompanying wrench to rotate the upward adjusting
nut clockwise according to the method as shown in Figure I, to move it
downward, until it is parallel and level.

Energy Saving Tips
· The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
· Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
· Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This
cuts down on frost build-up inside the appliance.
· Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
· Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
14