Bell'O CW340 User manual

CW340
AUDIO/VIDEO TELEVISION SYSTE
ASSEMB Y INSTRUCTIONS
All manuals and user guides at all-guides.com
all-guides.com

Bell’O International Corp. will not be responsible for failure to assemble as directed or for the improper assembly, use or handling of this stand.
FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS:
! DO NOT P ACE ITEMS ON THE SHE VES WHICH EXCEED THE MAXIMUM WEIGHT IMITS OF 50 BS. FOR TOP SHE F,
25 BS. FOR EACH MIDD E SHE F, AND 75 BS FOR THE BOTTOM SHE F.
! ALWAYS RE OVE THE TV AND OTHER EQUIP ENT FRO THE FURNITURE PRIOR TO OVING THE ASSE BLED UNIT.
! BE CAREFUL WHEN OVING THE ASSE BLED FURNITURE AFTER THE GLASS SHELVES HAVE BEEN IN-
STALLED, AS THIS AY CAUSE THE SHELVES AND OTHER ITE S TO BECO E UNSECURED AND FALL.
! WHEN IN USE, THIS FURNITURE UST BE PLACED ON A FLAT, SOLID AND LEVEL SURFACE.
! DO NOT LEAN ON THE TV WHEN IT IS ON THE TV STAND.
! DO NOT CLI B OR STEP ON THE STAND.
! DO NOT BANG INTO OR PLACE YOUR OWN WEIGHT ON THE GLASS SHELF.
All manuals and user guides at all-guides.com

PARTS IST
#
YF1
YF2
YF3
YF4
YF5
YF6
YF7
YF8
YF9
1
3
6
1
4
4
12
2
4
2
Quantity
Part
YF10
#
YF11
YF12
YF13
YF14
YF15
YF16
YF17
YF18
YF19
1
1
1
1
1
1
1
1
1
1
Quantity
Part
YF20
8 mm
15 mm
28 mm
38 mm
All manuals and user guides at all-guides.com

1. ATTACH the Right Curved Wood Leg (YF12) to the Right Black Chrome Post (YF10) as shown and SECURE using a 38 mm Bolt
(YF4). Do not yet fully tighten.
2. ATTACH the Left Curved Wood Leg (YF13) to the Left Black Chrome Post (YF11) as shown and SECURE using a 38 mm Bolt
(YF4). Do not yet fully tighten.
ASSEMB Y INSTRUCTIONS
NOTE: 2 PEOPLE ARE RECO ENDED TO ASSE BLE THIS FURNITURE. TO AVOID DA AGE DURING ASSE BLY, IT SHOULD BE ASSE BLED ON A
SOFT SURFACE.
Fig. 1
YF4
YF4
YF12
YF10
YF11
YF13
RIGHT
LEFT
All manuals and user guides at all-guides.com

Fig. 2
YF15
YF10
YF12
YF16
YF13
YF11
YF2
YF2
YF3
YF3
YF3
YF3
3. ATTACH the bottoms of the Right and Left Curved Wood Legs (YF12, YF13) to the Bottom Shelf Support Frame (YF16) as shown
using two 28 mm Screws (YF3) for EACH Leg. Do not yet fully tighten.
4. ATTACH the tops of the Right and Left Curved Wood Legs (YF12, YF13) to the Top Shelf Support Frame (YF15) as shown using
two 15 mm Screws (YF2) for EACH Leg. Do not yet fully tighten.
5. ATTACH the bottoms of the Right and Left Black Chrome Posts (YF10, YF11) to the Bottom Shelf Support Frame (YF16) as shown
using one 28 mm Screws (YF3) for EACH Post. Do not yet fully tighten.
6. ATTACH the tops of the Right and Left Black Chrome Posts (YF10, YF11) to the Top Shelf Support Frame (YF15) as shown using
one 28 mm Screws (YF3) for EACH Post. Do not yet fully tighten.
7. ake sure all parts are properly attached and that the preassembled stand is sitting flat on a level floor surface. NOW GO BACK
AND FULLY TIGHTEN ALL SCREWS AND BOLTS.
All manuals and user guides at all-guides.com

Fig. 3
YF3
YF16
YF7
YF15
YF14
YF3
8. SCREW three Adjustable ShelfSupport Screws (YF7) into the holes along the front top edge of the TopShelf Support Frame (YF15)
as shown.
9. ATTACH the C S®(Cable anagement System) Rear Panel (YF14) as shown to the Top and Bottom Shelf Support Frames (YF15,
YF16) and SECURE using four 28 mm Screws (YF3). Tighten all Screws fully.
All manuals and user guides at all-guides.com
all-guides.com

Fig. 4
YF6
YF10
YF12
YF13
YF14
YF11
YF8
YF5
10. SCREW four Shelf Locking Clips (YF6) into the prethreaded holes in the front of the C S®Rear Panel (YF14) as shown. Fully tighten screws.
Make sure the small screws in the Shelf Locking Clips are beneath the clips when in a final position.
11. P ACE six Soft Glass Pads (YF8), evenly distributed as shown above, along the top edge of the Bottom Shelf Support Frame (YF16).
12. SCREW four Round ShelfSupport Pins (YF5) into the prethreaded holes in the inside edges of the Right and Left Curved Wood Legs (YF12, YF13)
and in the Right and Left Black Chrome Posts (YF10, YF11) as shown. Tighten fully by hand.
YF16
All manuals and user guides at all-guides.com

Fig. 5
Fig. 5A
YF1
YF7
YF18
YF17
YF19
YF20
YF6
13. ATTACH the TopGlass Shelf (YF17) to the Top Shelf Support Frame as shown. ake sure the silver discs on the underside of the
Top Shelf are properly inserted into the brackets in the Support Frame and SECURE from underneath using two 8 mm Screws
(YF1). Be careful not to overtighten! NOTE: TURN the Adjustable ShelfSupport Screws (YF7) to make sure the Top Glass
Shelf is properly supported and level before placing any items on it.
14. INSERT the two iddle Glass Shelves (YF18, YF19) into place. ake sure each Shelf is FULLY inserted into the Shelf Locking
Clips (YF6), and that the front edges of the Shelves are properly resting on the four Round Shelf Support Pins (YF5). SECURE
each Shelf by tightening the small screw in the Shelf Locking Clips (YF6) as shown in Fig. 5A. Do not overtighten!
15. P ACE the Bottom Glass Shelf (YF20) down onto the Soft Glass Pads (YF8) on the Bottom Shelf Support Frame (YF16).
MAKE SURE ALL SHEL ES ARE PROPERLY INSTALLED, SUPPORTED, AND LE EL BEFORE PLACING ANY COMPONENTS
ON THEM. MAKE SURE THE AUDIO/ IDEO STAND IS PLACED ON A SOLID AND LE EL FLOOR SURFACE BEFORE USE.
All manuals and user guides at all-guides.com