Neo Chair N-GEN VELOX Series User manual

VELOX Series
USER GUIDE &
ASSEMBLY INSTRUCTIONS
WWW.NEOCHAIR.COM

Thank you for choosing us!
N-GEN, Next Generation, is Neo Chair's premium gaming chair brand
targeting a higher level gaming chair than any other brands.
When pronounced, N-GEN is similar to the word engine [ˈendʒɪn].
Like the engine to a car, N-GEN gaming chair is the most important
part for gamers who sit in the chair for a long time.
N-GEN's model names are inspired by the Latin words for "speed".

Footrest Model comes with a
FOOTREST attached to the seat.
We recommend
keeping your
Allen key for
future maintenance.
IT'S TIME TO UPGRADE YOUR CHAIR!
CHAIR PARTS
1 2
4
HARDWARE
ACCESSORIES
If you see any missing parts, please contact [e-mail]
Back
BASE
SEAT
PLASTIC COVER
ARMREST
GAS LIFT
CONTROL MECHANISM
WHEEL
TILTING
BOLT X4
ARMREST
BOLT X4
ADJUSTOR
BOLT X4
PLASTIC COVER
BOLT X2
HEAD CUSHION LUMBAR SUPPORT
Let Team Neo Chair know if there are any issues. [e-mail]
Start with attaching the
base leg vertically
Press the base till you
hear the "click"
STEP 1. BASE
ALLEN KEY
3

Let Team Neo Chair know if there are any issues. [e-mail]
LOOSE BOLT ALERT!
1
2
3
ARMREST
BOLTS X4
IMPORTANT NOTICE
x2~3
UNDER-TIGHTEN
THE BOLTS
THE BOLT HOLES
SHOULD BE ALIGNED TIGHTEN ALL BOLTS
1 2 3
FRONT
FRONT
STEP 2. ARMRESTS
1
2
TILTING
BOLTS X4
TILTING ASSEMBLY SEQUENCE
ASSEMBLY OF
BOLTS 1 AND 2
ASSEMBLY OF
BOLTS 3 AND 4
TIGHTEN
ALL FOUR BOLTS
LOCKING
1
2
LOCKING
3
4
LOCKING
Be sure to match the "FRONT" labels.
If not, the seat may lean forward
and need to be reassembled.
TIP
ASSEMBLY
BOX
Use the cardboard box
for easier assembly.
ARMREST
LEFT and RIGHT
armrests are the SAME
CHECK
When the bolts seem loose, detach the armrests and
try inserting the bolts directly into their holes.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.

[e-mail]
Let Team Neo Chair know if there are any issues.
There is a fixed side and a loose side.
Please screw in the fixed side first.
Be sure to strongly tighten the recliner on.
A cover goes on top of this part, making it difficult to re-tighten later.
ADJUSTOR
BOLT X2
ADJUSTOR
BOLT X2
3
2
FIXED SIDE 4LOOSE SIDE
FIXED SIDE LOOSE SIDE
X
STEP 3. SEAT + BACK 1
Back
Can't see the bolt hole?
Please keep adjusting
until everything is lined up.

Let Team Neo Chair know if there are any issues. [e-mail]
SAFETY INFORMATION
This product is
designed for
one person
to sit at a time.
DO NOT use the
chair unless all
bolts, screws
and knobs are tight
DO NOT use the chair if
any of the components are
missing or damaged.
DO NOT stand on
the chair as a step
stool or a ladder.
DO NOT tilt the chair
forward, left, or right
while sitting.
Be careful NOT TO FALL
off from the chair.
Regularly check
and thighten all bolts,
screws, and knobs.
Be careful,
as some parts may be
sharp and heavy.
Keep in a
dry and cool place.
Failure to follow
these warnings
may cause
serious injuries.
Be careful not to hit the
furniture edges.
When moving the object,
proceed with caution.
5
5
CAUTION
HEAVY OBJECT
May cause muscle strain or back injury
If there are any problems,
contact Team Neo Chair.
ALMOST DONE!
[e-mail]
Then assemble on top of the recliner.
Please repeat the process for the other side
PLASTIC COVER
BOLT X1
PLASTIC COVER
TIP : Add the bolt in the cover first with the wrench.

Let Team Neo Chair know if there are any issues. [e-mail]
120˚
180˚
90˚
pop
pop
pop
pop
When you lay it down at 180 degrees,
you may hear popping noises.
This is not a defect of the product.
If the CONTROL MECHANISM
is properly installed, it should
be on your RIGHT.
USER GUIDE
CHECK!! RECLINE
TILT
ARMREST ADJUSTABLE
LOCK
HEIGHT
HEAD CUSHION, LUMBAR SUPPORT
Please be advised that leaning the back to
its MAXIMUM 180 degree position may
cause the chair to fall backwards.
MAKE SURE LOCK YOUR CHAIR
FIRST BEFORE RECLINING.

WWW.NEOCHAIR.COM