Bensons for Beds Sandra STK778203 User manual

age 1 of 9
Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
mportant information
— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
— In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame (Head End- Foot End- side Rails).
Product information
— Upholstered Bed Using Fabric Material.Conforms to BS EN1725 & BS 5852.
Care instructions
— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— eriodically check & re-tighten any fastener .
— eriodically dust lightly with a clean soft cloth.
— Do not use silicone based furniture polish.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE IECES ACROSS
THE FLOOR,AS THIS WILL CAUSE DAMAGE TO THE JOINTS.
KT00-12/05/2023
Minimum Two
ersons Assembly
60 MIN
Approximate
Assembly Time
SandraBedFrame180CM
STK778203/STK778206
Assembly instructions
lease keep these instructions for future reference.

ComponentsofCarton A
Page2 of9
Side Panel x 2
3
Footboard x 1
24
Headboard x 1
1
7
ComponentsofCarton B
Centre Rail x2
16 Support Rail x1
Legx4
Bracket x2
Bracket x2
910
Single Slat Cap x34+2 pcs
37 38 Double Slat Cap x34+1 pcs
Wooden Slats x51
14
6Support Leg x4
5SideRail x2

HardwareListinCartonB
Page 3 of 9
HardwareListinCartonB
AM6 x20MM x 36
7
7
7
7
7
BM6 x30MMx 4 ALLENKEY4MMx1
D
CM6 x40MM x 12
Step 1
Attach Leg to Headboard .
Attach Leg to Footboard .
71
2
7

Page 4 of 9
Step 2
M6X20mm
AX4 DX1
BX4
M6X30mm
Screwonto Headboard .
Screwonto Footboard .
B1
2
A

Step 3
Page 5 of 9
M6X20mm
AX12 D X1
3
A
10
10
3A
9
9
3
Attach Bracket and Bracket to Side panel .
Using 20mm Bolt and Allen Key as shown. 3
9
AD
10

Page 6 of 9
D X1
AX8
Step 5
6
6
4
4A
6
M6X20mm
2
Step 4
Donot tightenthe bolts
fullyuntil step8.
1
B3
3
3
1
Attach Support Leg to Centre Rail.
Using 20mm Bolt and Allen Key as shown.
6
AD4

M6X40mm
C X12 D X1 Page 7 of 9
Step 6
3
5
C
5
5
3
3
Attach Side Rail to Side Panel . Using 40mm
Bolt and Allen Keyas shown. 35
CD

Step 7
Page 8 of 9
M6X20mm
AX8 D X1
Step 8
M6X20mm
AX4 D X1
1
2
4
4
5
16
4
4
5
Attach Centre Rail to Headboard and
Footboard . Using 20mm Bolt and Allen
Keyasshown.
1
2
D
4A
Attach Support Rail to Side Railand
Centre Rail. Using 20mm Bolt and Allen
Keyasshown.
5
D
16 A
4
Completelytighten All the bolts.

Page 9 of 9
Incorrect:Slatcurve
facingdownwards.
Correct:Slatcurve should
befacingupwards.
SLAT WARNING
Step 9
9.1 Insert Wooden Slatsinto Single Slat Cap ;
9.2 Press Single Slat Cap into Side Rail , repeat the same procedure for the opposite side.
9.3 Insert free endsof both Wooden Slatsinto Double Slat Cap ,then press Double Slat into Centre Rail
asillustrated.
Repeat the same proceduresgoing backwardsfor every rowof slats.
14
5
4
14 38
37
37 38
37
9.1 9.2 9.3
14
37 38
14
14
54