Bentone MVD 210 Technical specifications

Providing sustainable energy solutions worldwide
Installation- and maintenance instruction
BFG 1-2 H3 Biogas
LME23.331C2
DMV-DLE 507
MVD 210
FRS 510
VPS 504
178 122 35-4 CR00635 2023-07–03
Translation of the original instructions.

2Bentone
example Beispielexempel
352011030141
Designation
Type
Model
Serial no.
Motor supply
Main supply
MADE IN SWEDEN BY
LIGHT OIL 35-90kW 1,25-6,0 cSt 7-14bar
BF 1 KS 76-24
BF 1
BF 1 KS 76-24
1234567
1~230V 1,0A 50Hz IP 20
Man.Year 2019
Cap. Min-Max
3
?
1
-sv
1. Manualer på övriga språk
2. www.bentone.com\
nedladdning eller scanna
QR-koden.
3. Skriv in brännarens
artikelnummer som nns på
din typskylt (se bild) och välj
ditt språk.
Detaljerad ecodesign
information kan laddas ner
på: www.bentone.com/
ecodesign.
-en
1. Manuals in other languages
2. www.bentone.com\download
or scan QR-code.
3. Enter the burner`s article
number on your data plate (see
picture) and select language.
Detailed ecodesign information
can be downloaded at:
www.bentone.com/ecodesign.
-da
1. Manualer på andre sprog
2. www.bentone.com\
download eller scan
QR-koden.
3. Indtast brænderens
artikelnummer, der ndes
på typeskiltet (se billede), og
vælg dit sprog.
Detaljerede oplysninger om
ecodesign kan downloades
på: www.bentone.com/
ecodesign.
-fr
1. Manuels dans d’autres
langues
2. www.bentone.com\
download ou scannez le code
QR.
3. Saisir le numéro d’article
du brûleur sur votre plaque
signalétique (consultez
l’illustration) et sélectionnez
la langue.
Des informations détaillées
sur l’écodesign peuvent être
téléchargées à l’adresse:
www.bentone.com/
ecodesign.
-de
1. Gebrauchsanweisungen in
anderen Sprachen
2. www.bentone.com\download
oder scannen Sie den QR-Code.
3. Geben Sie die Artikelnummer
des Brenners auf Ihrem
Typenschild ein, (siehe Bild)
und wählen Sie die Sprache
aus.
Detaillierte Informationen zum
Ecodesign können unter
www.bentone.com/ecodesign
heruntergeladen werden.
2

3Bentone
Table of contents
1. General Information............................................................4
1.1 Delivery inspection........................................................................ 4
1.2 Safety ............................................................................................... 4
1.3 What to do if you smell gas......................................................... 5
2. Technical data.......................................................................6
2.1 Dimensions BFG 1-2 H3............................................................... 6
2.2 Capacity range............................................................................... 7
2.3 Gas categories, approved gases................................................ 7
2.4 Technicalspecication ................................................................. 7
2.5 Model BFG 1-2 H3......................................................................... 8
2.6 Workingeld.................................................................................. 8
2.7 Setting for nozzle assembly and air damper ......................... 9
2.8 Components................................................................................. 10
2.9 Skeleton diagram 2-stage burner, Biogas.............................. 12
2.10 Adjusting the gas train............................................................... 13
3. Electric equipment.............................................................14
3.1 Safety system .............................................................................. 14
3.2 Wiring diagram............................................................................ 14
3.3 Function LME... ............................................................................ 15
3.4 Control program at faults; fault mode indicator LME .... .... 16
4. Installation..........................................................................18
4.1 General instructions................................................................... 18
4.2 Instructions .................................................................................. 18
4.3 Inspection and maintenance.................................................... 18
4.4 Preparation for assembly ......................................................... 18
4.5 Gas supply .................................................................................... 18
4.6 Electric connection ..................................................................... 18
5. Mounting ............................................................................19
5.1 Hole pattern................................................................................. 19
5.2 Burner installation ...................................................................... 19
5.3 Gas connections.......................................................................... 19
5.4 Electric connection ..................................................................... 19
5.5 Gas quality.................................................................................... 20
5.6 De-aerating................................................................................... 20
5.7 Tightness control ........................................................................ 20
5.8 Calculationofgasow.............................................................. 21
6. Settings ...............................................................................22
6.1 Brake plate adjustment ............................................................. 22
6.2 Air adjustment ............................................................................. 22
6.3 Startup........................................................................................... 23
6.4 Control of combustion .............................................................. 23
6.5 Settingtheairpressureswitch ................................................ 24
6.6 Settingthegaspressureswitch,min...................................... 25
7. Double Solenoid Valve DMV-DLE......................................26
7.1 Technical data .............................................................................. 26
7.2 DMV-DLE 512-520/11................................................................. 27
7.3 DMV-DLE 525/11......................................................................... 27
8. Gas solenoid valve MVD 210/5 / MVD 215/5 ...................29
9. Gas pressure regulator .....................................................31
10. Leakage control VPS 504 ..................................................33
10.1 Technical data .............................................................................. 33
10.2 Program sequence ..................................................................... 33
10.3 Electrical connection ................................................................. 34
11. Service .................................................................................35
11.1 Burner Service Schedule, Gas .................................................. 35
11.2 Component replacement intervals.......................................... 35
11.3 Combustion device ..................................................................... 36
11.4 Fan motor replacement............................................................. 37
11.5 Air intake and suction cone ...................................................... 38
11.6 Fanwheel...................................................................................... 40
11.7 Electrical package ....................................................................... 41
11.8 Controlofamemonitoringandionizationcurrent ........... 43
12. Handing over of the installation ......................................45
13. Troubleshooting.................................................................46
14. Service- and inspection protocol .....................................48

4Bentone
172 515 01-2 2021-10-05
1. General Information
The burner may only be used for its intended purpose in accordance with the
product’s technical data.
We reserve the right to make design changes and cannot be held liable for any
misprints or typographical errors.
Modifying the design or using accessories or components that have not been
approved by Enertech in writing is strictly prohibited.
This Installation and Maintenance manual:
• is to be regarded as part of the burner and must always be kept near
the installation site.
• must be read prior to installation.
• is intended for use by authorised personnel.
1.1 Delivery inspection
• Make sure everything is delivered and the goods have not been
damaged during transit. Transport damage should be reported to the
shipping company.
• If something is wrong with a delivery, report it to the supplier.
1.2 Safety
- before installation:
• Installation and work on the burner and associated system
components may only be carried out by persons who have undergone
relevant training.
• The product is packaged to prevent damage from occurring when
handled – Handle the product with care! Lifting equipment must be
used to lift larger packages.
• The products must be transported/stored on a level surface in a dry
environment, max. 80% relative humidity, no condensation.
Temperature -20 to +60 °C.
- installation:
• The burner must be installed in accordance with local regulations for
re safety, electrical safety, and fuel distribution.
• The premises must comply with local regulations pertaining to use of
the burner and must have adequate air supply.
• The installation site must be free of chemicals.
• Fire extinguisher with Class BE recommended.
• Make sure when installing the burner that there is enough space to
service the burner.
• The electrical installation must be professionally carried out in
accordance with current mains electricity regulations and in a
professional manner.
• Make sure that the burner is suitable for the application (see Technical
Data).
• All components must be installed without being bent, twisted or
subjected to mechanical or thermal forces that affect components.

5Bentone
• Care must be taken by the installer to ensure that no electrical cables
or fuel lines are pinched or otherwise damaged during installation or
service.
• Sharp edges can occur on, for example: ame tube, fan wheel and air
damper.
• The gas outlet from the pressure regulator must be congured in
accordance with applicable regulations and lead to a safe area.
- before rst start:
• The burner must not be put into operation without proper safety and
protection devices.
• Permitted ambient temperature during operation -10 to +60 °C. Max.
80% relative humidity, no condensation.
• The surface temperature of the burner’s components may exceed
60 °C.
• Handle with caution – the burner has moving parts, and there is risk
of crushing injuries.
• Seal inspections must be performed during installation and servicing
to prevent leakage.
• Fitting and installation work has been completed and approved.
• Electrical installation has been correctly performed.
• Flue gas ducts and combustion air ducts are not blocked.
• All actuators and control and safety devices are in working order and
correctly set.
• If the boiler is equipped with an access hatch, this must be equipped
with a hatch opening switch connected to the burner’s safety system.
• When in operation, the burner’s noise level can exceed 85 dBA – use
hearing protection!
- operation:
• Carry out all stipulated settings, service and inspection work within
the set time.
1.3 What to do if you smell gas
• Turn off the fuel supply.
• Turn off the device and remove the boiler from operation.
• Open windows and doors.
• Prevent open ames or sparking, e.g. do not turn lights on or off, do
not use any electrical appliances or mobile phones.
• Evacuate the building.
• Notify the installer or gas supplier of the problem so that it can be
rectied.

6Bentone BFG 1
145
109,5
10
23,5
119
130 183
227
19
275
176
ø103
116
765
160303-641
2. Technical data
The burner is intended for:
• Operation in installations according to EN 303 and EN 676.
Fuels:
• Natural gas H, E, L, LL.
• LPG, Butane and Propane.
• Dry biogas max 0.1 Vol% H2S and min 50% CH4.
2.1 Dimensions BFG 1-2 H3
2.1.1 Dimensions anges
172 535 62-2 2023-07-03

7Bentone BFG 1
2.3 Gas categories, approved gases
Components are approved for dry biogas with a maximum content of 0.1% H2S.
2.2 Capacity range
Measurements according to EN 15036-1:2006
Alt.1 The noise level of the burner can be reduced by equipping the burner
with silencer. Installation must be done so it does not prevent air supply
to the burner.
Alt.2 The burner’s noise level can be reduced by connecting the burner’s air
intake to the air duct that opens into an appropriate location. Installation
must be done so it does not prevent air supply to the burner.
2.4 Technical specication
BFG 1
Main supply 230V, 1~, 1.7A, 50/60Hz, IP20
Max fuse rating 6.3A
NOX-class 2
Noise level 75dBA
Category Country of destination Supply pressure
II2R3R AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HR, HU, IE,
IS, IT, LT, LU, LV, MK, MT, NL, NO, PL, PT, RO, RS, SE, SI, SK, TR 20 mbar
II2H3B/P AT, CH, CY, DK, FI, LT, RO, SE, SK 20 mbar
II2H3P GB, IE 20 mbar
II2L3B/P RO 20 mbar
II2E3B/P PL 20 mbar
I2E(R)B BE 20 mbar
I3P BE 20 mbar
II2EK3B/P NL 20 mbar
160302-302-5
BFG 1-2 H3
G20 25 -100 2.6 10.6 360
G25 25 - 100 3.1 12.3 360
G30 37 - 100 1.1 3.1 360
G31 37 - 100 1.5 4.1 360
25 - 80 4.2 13.3 360
160303-770-1
Capacity
kW
Gas quantity
at min. power
Nm3/h
Gas quantity
at max. power
Nm3/h
Max.
connection
pressure mbar
Min
connection
pressure mbar
See data plate.
Biogas
Gas quantity and capacity vary according to grade of gas and connection pressure.

8Bentone BFG 1
2.5 Model BFG 1-2 H3
2.6 Working eld
Biogas
!Do not exceed working
eld.
-0,5
0,0
0,5
1,0
1,5
2,0
2,5
3,0
20 30 40 50 60 70 80
mbar
kW
160303-640
25-80 kW
Natural gas, LPG, Butane and Propane
-0,5
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
20 30 40 50 60 70 80 90 100
mbar
kW
160303-771
G20, G25 25 - 100 kW
G30, G31 37 - 100 kW
ø103
160303-486
8
160303-487
3-3.5

9Bentone BFG 1
!Scale value valid at
0 mbar in furnace
pressure.
0,0
2,0
4,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
22,0
25 35 45 55 65 75 85 95
160303-630
kW
Scale
Burner output
Air damper, first stage
Air damper, second stage
Brake plate adjustment
2.7 Setting for nozzle assembly and air damper
Basic settings should only be seen as setting values to get burner to start.
Once the burner has started and established ame, it is necessary to adjust the
settings so that they are adapted to the installation and the fuel used.

10 Bentone BFG 1
2.8 Components
1. Flame tube
2. Connection gas valve
3. Safety valve
4. Gas pressure switch
5. Gas valve
6. Pressure regulator
7. Filter
8. Ball valve
9. Ignition transformer
10. Motor
11. Capacitor
160303-642
42
1
9
11 10
763 5 8

11Bentone BFG 1
12. Leakage control (VPS)
13. Screw for dividing the burner
14. Air intake
15. Electric connection, stage 1
16. Air regulation, stage 1
17. Air regulation, stage 2
18. Air pressure switch
19. Gas burner control
20. Reset button
21. Nozzle assembly adjustment
22. Damper motor
23. Electric connection, stage 2
24. Air ow indicator
25. Nozzle assembly
26. Brake plate
27. Ignition electrodes
28. Nozzle
26
27
28
25
160303-644
160303-643
14
18
13
24
21
16
23
20
19
12
22 17
15

12 Bentone
172 515 72-2
2.9 Skeleton diagram 2-stage burner, Biogas
Gas train
1. Ball valve
2. Filter
3. Pressure regulator
4. Pressure outlet
5. Gas valve
6. Leakage control (VPS)
7. Safety valve on-off
8. Gas pressure switch
Pe Pressure before valve
Pa Pressure between valves
Adjusting points:
a. Main ow restrictor stage 2
(max load)
b. Gas pressure adjustment
c. Main ow restrictor stage 1
(min load)
d. Hydraulic brake stage 1 to 2
8
5 6 73
Pe Pa
21
4
a bd
c

13Bentone
2.10 Adjusting the gas train
The burner is test run with propane before delivery.
The safety valve (7) must be fully open during operation. At initial setting, the
adjusting screw (c) must have lifted the valve for stage 1 by 1-2 turns.
On start-up, safety valve (7) and valve on double solenoid valve (5) open, gas
ows through the valve for stage 1.
When the burner has started on stage 1, proceed to stage 2 and start adjusting
this stage rst. When stage 2 is complete, adjust stage 1.
Adjustment of stage 2 is done with adjusting screw (a) on the double solenoid
valve (5) which regulates the opening of the valve controlling the gas for
stage 2. The burner is now receiving gas for maximum load, adjust the power
on stage 2 to the desired load and set the air damper for stage 2 and nozzle
assembly for a good combustion.
The power is adjusted for stage 2 by adjusting the opening of valve 1 with the
adjusting screw (a) and the gas pressure is adjusted on the pressure regulator
screw (b). The air damper and nozzle assembly shall also be adjusted to obtain
the correct air volume and good combustion.
Adjustment of stage 1 on the burner is done when stage 2 is complete, adjust
the stage 1 valve on the double solenoid valve (5) using the adjusting screw (c).
If this is screwed in, the gas ow to the burner is increased by lifting the valve.
This valve is always open and this opening is what gives the min-load. Adjust
the air damper for stage 1 for good combustion.

14 Bentone
3. Electric equipment
3.1 Safety system
The safety system (safety switch for hatches, doors, water level, pressure,
temperature and other safety devices) must be installed in the safety circuit in
accordance with current regulations for the system.
The cables of the safety system must be separated so that the outgoing signal
is not placed in the same cable as the incoming signal.
3.2 Wiring diagram
172 615 85-3
Bn Brown
Bu Blue
Gn Green
Ye Yellow
Gn/Ye Green/Yellow
Bk Black
Gy Grey
Rd Red
Wh White
Og Orange
Vt Violet
E106325

15Bentone
3.2.1 Component list
3.3 Function LME...
1. Operating switch ON-Thermostat ON-Gas pressure switch ON
A check that the air pressure switch does not indicate fan pressure is
carried out.
2. Burner motor starts
A check that the air pressure switch indicates sucient fan pressure is
carried out.
3. The ignition spark is created
4. The gas solenoid valve is open
The gas is ignited. The ionisation electrode now indicates a ame.
5. The safety time expires
The ignition spark ceases. The safety period ceases. If the spark is missing
or it disappears after this time limit, the gas burner control is blocked.
6. Operating position
The burner is in operating position and can now change over to full load
if the operating switch and the thermostat for full load are in positon ON.
The burner can alternate between full and low load depending on set
temperature.
7. Stop
The operation of the burner can now be stopped with the control switch or
thermostat.
If the gas burner control is blocked
Red light in the gas burner control is lit. The burner is restarted by pushing
the reset button.
3.3.1 Technical data
!Mains connection and fuse
in accordance with local
regulations.
A1 Gas burner control
A3 Valve, leak tester VPS504
B1 Ionization electrode
U2 UV-detector QRC (LME23...)
F1 Operating fuse
H1 Lamp, low capacity
M1 Motor
M2 Damper Motor STM6SF-L
P1 Time meter, total operating time
P2 Time meter, high capacity,
total operating time
S3 Control thermostat
S4 Temperature limiter
S6 Control thermostat, stage 2
S7 Main switch
S8 Air pressure switch
S9 Gas pressure switch
T1 Ignition transformer
Y1 Gas solenoid valve 1
Y2 Gas solenoid valve 2
Y1S Safety solenoid valve
X3 Plug-in contact, burner
X4 Plug-in contact, boiler
X5 Plug-in contact, stage 2, burner
X6 Plug-in contact, stage 2, boiler
LME23.331C2
3 s
30 s
2.5 s
< 3 s
< 1 s
< 1 s
5 µA
20 µA
160303-324
Preiginition time
Prepurge time
Postignition time
Safety lockout time
Reset time after lockout
Reaction time on  ame failure
Min. ionisation current at  ame
Max. ionisation current

16 Bentone
Light period
(waiting period ≥10 s) Blinking code Pause Blinking codePress the reset
button > 3 s
3.4 Control program at faults; fault mode
indicator LME ....
3.4.1 Colour codes
3.4.2 Diagnosing alarm causes
After alarm disconnection, the red alarm signal light is lit continuously.
The diagnosing of the alarm cause can be read according to the following
sequence:
3.4.3 Limiting of starting repetitions
LME 11... has a function with start repetition if the ame is not created at start
or disappears during operation.. LME 11... allows max. three repetitions during
continuous starting cycle.
Table colour codes for multi-coloured signal light (LED)
Status Colour codes Colours
Waiting period «tw», other waiting periods ○………………… O
Ignition phase, ignition controlled ●○●○●○●○●○● Blinking yellow
Normal operation □………………… Green
Operation, poor ame signal □○□○□○□○□○ Blinking green
Illegal ame signal during start-up □▲□▲□▲□▲□▲ Green-Red
Undervoltage ●▲●▲●▲●▲●▲ Yellow-Red
Fault, alarm ▲………………… Red
Blinking code for fault codes ▲○ ▲○ ▲○ ▲○ Blinking red
Interface diagnostics ▲▲▲▲▲▲▲▲ Red icking
…… Continuous
○Off
▲Red
●Yellow
□Green

17Bentone
3.4.4 Alarm code table
Red blinking code on
signal lamp (LED)
Possible causes
Blinking 2 x
••
No ame creation at End of “TSA”
–defective or fouled ame monitoring.
–defective or fouled fuel valves.
–poor burner setting.
–defective ring device.
Blinking 3 x
•••
“LP” defective
–No air pressure switch signal after “t10”.
–“LP” is welded in open position.
Blinking 4 x
••••
Illegal ame signal during start-up.
Blinking 5 x
•••••
Time out “LP”
–“LP” is welded in open position.
Blinking 6 x
••••••
Free
Blinking 7 x
•••••••
Too many ame disappearances during operation.
–poor burner setting.
–defective or fouled fuel valves.
–defective or fouled ame monitoring.
Blinking 8 x
••••••••
Free
Blinking 9 x
•••••••••
Free
Blinking 10 x
••••••••••
Connection fault or internal fault, outgoing contacts or
other faults.
Blinking 14 x
••••••••••••••
CPI contact not closed.
During the diagnosing of the alarm cause, the control outputs are voltage-
free.
• The burner is disconnected.
• Exception, alarm signal «AL» at board 10.
• Reconnection of the burner happens after resetting only.
• Press the reset button 0.5...3 s.
3.4.5 Interface diagnostics
To change to interface mode, press and hold the reset button longer than 3 s.
To go back to the normal position, press and hold the reset button longer than
3 s. If the gas burner control is in the alarm position, it is reset by pressing the
reset button 0.5...3 s.

16 Bentone
172 535 09-2
4. Installation
4.1 General instructions
Installation must be carried out in accordance with current regulations and
instructions.
The supplier/installer of the facility is obliged to familiarize himself with
all regulations so that the installation meets the requirements of the local
authorities.
Installation, assembly and settings must be performed to obtain the best
possible function. Only gas intended for the gas burner may be used.
4.2 Instructions
It is the installer’s responsibility to instruct the user in detail in the functions of
the gas burner and the entire system.
4.3 Inspection and maintenance
The system must be maintained at the interval specied in the service
schedule. If the burner is in a dirty environment, service should be done at
more frequent intervals.
4.4 Preparation for assembly
Check that the burner’s dimensions and capacity range match the current
boiler. The power information on the type plate refers to the burner model’s
min. and max. effect.
4.5 Gas supply
In order to obtain good operational safety, it is important that the installation
of the gas distribution system is carried out correctly, considering the
following:
• Check that the burner is approved for the gas quality of the
installation.
• Check that the burner gas components are approved for the specied
gas pressure, see type plate.
• Installation must be carried out in accordance with current standards.
• Pipe lines should be assembled so that service can easily be
performed on the boiler and burner.
• Pipe lines should be assembled so that any contaminants do not come
into contact with the gas components.
4.6 Electric connection
• Before work on the electrical connection, the current must be
disconnected so that the installation is isolated.
• Connection must be done in accordance with the applicable
regulations.
• Connection must conform to the wiring diagram.
!If any electrical connection other than that recommended
by Enertech is used, there is a risk of property damage and
personal injury.

19Bentone BFG 1
E
F
X1
X2
172 525 26-2
5. Mounting
5.1 Hole pattern
Check that the hole pattern on the boiler matches that of the ange, (see
Technical data).
5.2 Burner installation
1. Install the ange with gasket on the boiler.
2. Insulate between the blast tube and the boiler door to minimize heat
radiation.
3. Check the ignition electrode and ionisation electrode.
(Refer to Technical data).
4. Install the burner on the boiler and lock into the ange (E).
5. Install the gas line on the burner. Check that the O-ring has not been
damaged during installation, fasten with the screws (F).
6. Where support for the multiblock is included, this should be installed.
5.3 Gas connections
1. Check the gas pipe dimensions. (According to local regulations).
2. Connect the gas pipe to the gas ange of the multiblock.
3. A manual gas valve should be installed in the vicinity of the burner.
4. No mechanical stresses/forces should exist in the gas connection.
5. Check the sealing of the gas connections, including the multiblock
and anges.
NOTE!
If the gas connection is via a hose, the support for the multiblock that is
supplied with the burner should be mounted (F). Install the support so that the
underneath of the multiblock rests on it.
5.4 Electric connection
If the boiler does not have a pre-wired connector, connect in the included
connector, X2 according to the wiring diagram.
1. Turn off the main switch.
2. Connect the Eurostecker X2 acc. to Alt. 1 - 3, (see Electric equipment).
3. Install the Eurostecker X2 on the burner.
4. Turn on the main switch.

20 Bentone BFG 1
5.5 Gas quality
Check that the combustion head is intended for the gas quality to be used,
(see Technical data).
5.6 De-aerating
De-aerating the gas line by closing the tap to the gas connection and
unscrewing the screw on the measuring nipple for the connection pressure.
Connect a plastic hose, open the tap and drain the gas in a safe place. When
the de-aerating is completed, be sure to ret the screw on the measuring
nipple.
5.7 Tightness control
When checking for leakage, the solenoid valve must be closed. A pressure
gauge is connected to the measuring nipple ”Pa”, see picture. The test
pressure in the ttings should be 1.5 x max inlet pressure or min. 150 mbar.
If leaks are found during measurement, locate the source using soapy water
or leak detection spray. After sealing: check the tightness of the gas xture
again.
!Check the gas tightness.
Pa