Bergstrom H020 User manual

Deluxe Plug in Wireless Doorbell
H020 v01:
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Parts
Dimensions
10.5cm x5.8cm x7.8cm
Composition
PP, copper, PCB & components
•HEAR THE DOORBELL NO MATTER WHERE
YOU ARE IN THE HOUSE! SO YOU NEVER
MISS A VISITOR AGAIN
•DELUXE PLUG IN WIRELESS DOORBELL THAT
HAS 52 DIFFERENT RINGTONES TO SELECT
FROM.
•ADJUSTABLE RINGER VOLUME FROM 25Db
UP TO A SUPER LOUD 110Db
•SIMPLY PLUG THE DOORBELL INTO A MAINS
SOCKET ANYWHERE IN YOUR HOUSE AND
THANKS TO THE INBUILT SOCKET YOU WON’T
EVEN LOSE A PLUG POINT
•THE PUSH BUTTON BELL TRANSMITS UP TO
30 METRES AND WILL EVEN WORK THROUGH
WALLS AND CEILINGS AND IS POWERED BY
1X12V BATTERY (INCLUDED)
•SIMPLE AND QUICK INSTALLATION
Receiver
Transmitter
Transmitter
Voltage: 240VAC, 50Hz, 13A, 3120W Max,
Frequency: 433.92MHz
Battery: 12VDC, 23A (included)
Working environment: -10°C~ to +40°C

Deluxe Plug in Wireless Doorbell H020 Instructions for Use
Please read and retain these instructions for future reference v001: 06/07/20
Operating instructions ：
A. Plug in the receiver. A” Ding dong” sounds and the LED Indicator 1 will flash
about 4 seconds to show the output socket is energised;
B. Put the battery (12V 23A )into the transmitter;
C. Pairing: press the Volume button on the receiver for 5 seconds until the music
sound stops and the LED Indicator 1 does not flash. Then press the Bell Button
on the transmitter . After hearing 2 buzzes the receiver and transmitter are
paired.
D. When the bell button on the transmitter is pressed the receiver will play the selected music and the LED
Indicator 1 flashes at the same time.
E. If the transmitter did not pair with the receiver within 20 seconds, two buzzing sounds will be heard
meaning the learning code is cancelled automatically. Please repeat step C to pair.
F. Tune selection: Total 52 songs are available. Press Tune selection button to select a tune
G. Volume adjust: The volume can be adjusted to 5 different levels. Press the Volume button to select the
appropriate volume.
Installation:
1. The transmitter of Wireless doorbell should be installed outside of the door at a height of 1.2 meters to 1.7
meters. The transmitter can be fitted with an adhesive 3M sticker (provided)
2. The receiver should to be plugged into any power outlet inside, preferably on the wall socket. Note that the
distance between the transmitting and receiving parts should not exceed 30 meters. When the doorbell is
not working properly, please adjust the distance between the transmitter and the receiver.
CARE AND CLEANING INSTRUCTIONS:
Wipe with a clean dry cloth.
BATTERIES
Keep batteries away from children and pets.
Do not mix used and new batteries.
Install batteries in accordance with its polarity symbols.
Remove the batteries if left for long periods.
Never dispose of batteries in a fire.
Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance with
local regulations. For detailed information, contact your local authority.
Follow the battery manufacturer’s safety, usage, and disposal instructions.
DISPOSAL
•Coopers of Stortford use recyclable or recycled packaging where possible.
•Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•Plastics, polybags –this is made from the following recyclable plastic.

Deluxe Plug in Wireless Doorbell H020 Instructions for Use
Please read and retain these instructions for future reference v001: 06/07/20
•
Code & Symbol
Type of Plastic
PC (polycarbonate)
Commonly used for
CD’s, crisp packets, various flexible packaging, baby bottles, sunglass
lenses
Notes
Not often or widely recycled
•At the end of the product’s lifespan please check with your local council authorised household waste
recycling centre for disposal.