Bernini EZ GRIP NOZZLE User manual

Hold In Multiple Positions
Adjust To Your Comfort
Multiple Pattern Spray Nozzle
Great For All Your Watering Needs!
INSTRUCTIONS
1. Remove the EZ Grip NozzleTM from the package.
2. Ensure the multi-pattern spray nozzle (included) is tightened securelyto the outlet
of the EZ Grip Nozzle™
3. Attach the other end of your EZ Grip Nozzle™ (the inlet) to an outlet of a water hose.
4. Turn on the faucet attached to the hose to start using your EZ Grip Nozzle™.
*Please Note:Your EZ Grip Nozzle™ may come with an extra rubber washer.
There should only be one washer per connection.
Two washersdoubled up in the spray nozzle or in the inlet can cause leakage.
Faucet
Assemble EZ Grip Nozzle™ to Hose Parts
Multi-Pattern
Spray Nozzle
EZ Grip
Nozzle™
Adjustable
Large Grip
Adjustable/Rotating
Comfort Handle
Large On-Off
Valve
EZ GRIP NOZZLE
Using The EZ Grip Nozzle™
A B
EZ GRIP NOZZLETM
Locking
Button
CD
EF
Screw hose outlet
to EZ Grip Nozzle™ inlet.
1 Rubber Washer
Make sure the Multi-
Pattern Spray
Nozzle is tight
and secured.
1 Rubber Washer
A. With the handle in the lateral position insert
fingers through the handle and grasp the
arc of the handle. The EZ Grip Nozzle™
will hang below the hand.
B. With the handle in the lateral position insert
fingers through the handle and grasp the
body of the nozzle between the On/Off Valve
and the inlet. This grip is larger than the
handle grip.
C. To turn the handle 90 degrees press the
locking button, located in the center of the
base of the handle, to release it. Turn the
handle and it will snap into position. Repeat
this step to turn it back to the lateral position.
D. With the handle in the perpendicular position
insert fingers through the handle and grasp
the arc of the handle. The EZ Grip Nozzle™
will hang below the hand.
E. With the handle in the perpendicular position,
and the On/Off Valve facing up, insert palm
(face down) through the handle and grasp
the arc of the handle. The EZ Grip Nozzle™
will rest above the hand.
F. With the On/Off Valve facing up turn clock-
wise (one quarter turn) to turn On. Turn one
quarter turn counter clockwise to turn Off
water flow.

•The water in ANY garden hose may become contaminated & cause serious health effects.
•Keep out of reach of children.
•For general OUTDOOR use ONLY in applications under 80 psi.
•DO NOT use this nozzle for commercial applications, in hot water applications, or high pressure applications.
•DO NOT leave this product unattended when it is in use or under pressure.
•This product is NOT A TOY.
WARNING
www.berninifountains.com
For Assistance Call: 1 [phone]
001300 BFEZ QVC Inst rev4a
LIMITED ONE YEAR WARRANTY
from state to state. This product has a one year limited warranty on all materials and
workmanship. Bernini™ warrants the original purchaser of this product that the
product will be free from manufacturing defects in workmanship and material for a period
of one (1) year from the date of original purchase. If within one (1) year this product fails due
to defect in material or workmanship, Bernini™ will repair, replace or supply any
defective part(s) at their discretion. The purchaser must contact Bernini™ and
provide a description of the defective part, including digital pictures if requested, with this
original purchase documentation as validation of warranty coverage. This warranty does not
cover or apply to: (a) damage to the product due to misuse, mishandling, and abuse, (b)
products not used in accordance with instructions, (c) product not assembled or installed
according to instructions, and (d) normal wear and tear.
Santee, California 92071 | Patents Pending | Email:[email protected] | On the web: berninifountains.com
© Yeiser Research & Development, LLC; 2021. All rights reserved.
Made in China | Designed in the USA
January 2021© Yeiser Research & Development LLC and Bernini™ EZ Grip Nozzle™. Trade names, product names and logos
used in this document are the trademarks or registered trademarks of Yeiser Research & Development LLC, Santee, CA 92071
Call us for assistance at [phone] or you can email us at [email protected] or mail us at:
9545 Pathway Street, Santee, CA 92071,
Our Customer Care Department is available:
Monday - Friday 8:30am to 4:00pm PST /11:30am - 7:00pm EST
personal injury and or damage or destroy the product.Doing so may cause serious,
Made In China, Designed In The USA
PATENTS PENDING
LIMITATION OF LIABILITY
Liability limited to the purchase price of this product. YRD LLC shall
not be liable for any incidental or consequential damages or any
implied warranty on this product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
GH
G. To change the water spray pattern on the
Multi-Pattern Spray Nozzle grasp the large,
nubby, rubber grip and turn left or right
until it clicks to the desired pattern.
H. To remove the Multi-Pattern Spray Nozzle
grasp the base cup of the spray nozzle
and turn right until it unscrews.