Bertazzoni P604IM2B2NE-20 Instruction Manual

INSTRUCTION OF USE
MANUALE D’ISTRUZIONE
NOTICE D’UTILISATION
MANUAL DE UTILIZACIÓN
P604IM2B2NE-20

2

3
SUMMARY
SAFETY.........................................................................................................................................4
P RECAUTIONS BEFORE USAGE ....................................................................................................... 4
U SING THE APPLIANCE .................................................................................................................. 4
P RECAUTIONS TO PREVENT DAMAGE TOTHE APPLIANCE ...................................................................5
P RECAUTIONS IN CASE OF APPLIANCE FAILURE ................................................................................ 6
O THER PROTECTIONS ...................................................................................................................6
DESCRIPTION OF THE APPLIANCE...........................................................................................7
T ECHNICAL CHARACTERISTIC ......................................................................................................... 7
C ONTROL PANEL ..........................................................................................................................8
USE OF THE APPLIANCE............................................................................................................ 8
S ENSITIVE TOUCH ......................................................................................................................... 8
D ISPLAY ......................................................................................................................................8
V ENTILATION ................................................................................................................................ 8
STARTING-UP AND APPLIANCE MANAGEMENT .....................................................................9
B EFORE THE FIRST USE ................................................................................................................. 9
I NDUCTION PRINCIPLE ...................................................................................................................9
P OWER SELECTION ZONE “SLIDER” AND TIMER SETTING ZONE ........................................................9
S TARTING - UP ............................................................................................................................... 9
P AN DETECTION ......................................................................................................................... 10
R ESIDUAL HEAT INDICATION ........................................................................................................ 10
B OOSTER AND DOUBLE BOOSTER FUNCTION ................................................................................. 10
T IMER ....................................................................................................................................... 11
A UTOMATIC COOKING ................................................................................................................. 12
S TOP &G O FUNCTION .................................................................................................................. 12
R ECALL F UNCTION ..................................................................................................................... 13
B RIDGE F UNCTION ..................................................................................................................... 13
« K EEP WARM » F UNCTION ......................................................................................................... 13
C ONTROL PANEL L OCKING .......................................................................................................... 14
P OWER LIMITATION CONFIGURATION ............................................................................................ 14
COOKING ADVICES................................................................................................................... 15
P AN QUALITY ............................................................................................................................. 15
P AN DIMENSION .......................................................................................................................... 15
E XAMPLES OF COOKING POWER SETTING ...................................................................................... 16
MAINTENANCE AND CLEANING .............................................................................................. 16
WHAT TO DO IN CASE OF A PROBLEM.................................................................................. 16
ENVIRONMENT PRESERVATION ............................................................................................. 18
INSTALLATION INSTRUCTIONS............................................................................................... 19
ELECTRICAL CONNECTION ..................................................................................................... 21

4
SAFETY
Precautions before usage
•Unpack all the materials.
•The installation and connecting of the appliance have to be
done by approved specialists. The manufacturer can not be
responsible for damage caused by building-in or connecting
errors.
•To be used, the appliance must be well-equipped and installed
in a kitchen unit and an adapted and approved work surface.
•This domestic appliance is exclusively for the cooking of food,
to the exclusion of any other domestic, commercial or industrial
use.
•Remove all labels and self-adhesives from the ceramic glass.
•Do not change or alter the appliance.
•The cooking plate can not be used as freestanding or as
working surface.
•The appliance must be grounded and connected conforming to
local standards.
•Do not use any extension cable to connect it.
•The appliance can not be used above a dishwasher or a
tumble-dryer: steam may damage the electronic appliances.
•The appliance is not intended to be operated by means of
external timer or separate remote control system.
Using the appliance
•Switch the heating zones off after using.
•Keep an eye on the cooking using grease or oils: that may
quickly ignite.
•Be careful not to burn yourself while or after using the
appliance.
•Make sure no cable of any fixed or moving appliance contacts
with the glass or the hot saucepan.
•Magnetically objects (credit cards, floppy disks, calculators)
should not be placed near to the engaged appliance.

5
•Do not place any metallic object except heating containers. In
case of untimely engaging or residual heat, this one may heat,
melt or even burn.
•Never cover the appliance with a cloth or a protection sheet.
This is supposed to become very hot and catch fire.
•This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
•Children shall not play with the appliance.
•Cleaning and user maintenance shall not be made by children
without supervision.
•Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Precautions to prevent damage tothe appliance
•Raw pan bottoms or damaged saucepans (not enamelled cast
iron pots,) may damage the ceramic glass.
•Sand or other abrasive materials may damage ceramic glass.
•Avoid dropping objects, even little ones, on the vitroceramic.
•Do not hit the edges of the glass with saucepans.
•Make sure that the ventilation of the appliance works according
to the manufacturer’s instructions.
•Do not put or leave empty saucepans on the vitroceramic hobs.
•Sugar, synthetic materials or aluminium sheets must not
contact with the heating zones. These may cause breaks or
other alterations of the vitroceramic glass by cooling: switch on
the appliance and take them immediately out of the hot heating
zone (be careful: do not burn yourself).
•WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
•CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
•WARNING: Danger of fire: do not store items on the cooking
surface.
•Never place any hot container over the control panel.

6
•If a drawer is situated under the embedded appliance, make
sure the space between the content of the drawer and the
inferior part of the appliance is large enough (3cm). This is
essential to guaranty a correct ventilation.
•Never put any inflammable object (ex. sprays) into the drawer
situated under the vitroceramic hob. The eventual cutlery
drawers must be resistant to heat.
Precautions in case of appliance failure
•If a defect is noticed, switch off the appliance and turn off the
electrical supplying.
•If the ceramic glass is cracked or fissured, you must unplug the
appliance and contact the after sales service.
•Repairing has to be done by specialists. Do not open the
appliance by yourself.
•WARNING: If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
Other protections
•Note sure that the container pan is always centred on the
cooking zone. The bottom of the pan must have to cover as
much as possible the cooking zone.
•For the users of pacemaker, the magnetic field could influence
its operating. We recommend getting information to the retailer
or of the doctor.
•Do not to use aluminium or synthetic material containers: they
could melt on still hot cooking zones.
•NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
THE USE OF EITHER POOR QUALITY POT OR ANY
INDUCTION ADAPTOR PLATE FOR NON-MAGNETIC
COOKWARE RESULTS IN A WARRANTY BREACH.
IN THIS CASE, THE MANUFACTURER CANNOT BE
HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO
THE HOB AND/OR ITS E
NVIRONMENT.

7
DESCRIPTION OF THE APPLIANCE
Technical characteristic
Type
P604IM2B2NE
-
20
Total power
7400
W
Energy consumption for the hob
EC
hob
**
170.5
Wh/kg
Front
left
heating zone
210x200
mm
Minimum detection
Ø 9
0 mm
Nominal power*
2100
W
Booster power*
2500 W
Double Booster power*
3000 W
Standardised cookware category**
B
Energy
consumption EC
cw
**
161.3
Wh/kg
Rear
left
heating zone
210x200
mm
Minimum detection
Ø 9
0 mm
Nominal power*
16
00 W
Booster power*
1850 W
Double Booster power*
-
Standardised cookware category**
B
Energy consumption EC
cw
**
161.3
Wh/kg
Rear
right
heating zone
210x200
mm
Minimum detection
Ø 9
0 mm
Nominal power*
21
00 W
Booster power*
2500 W
Double Booster power*
3000 W
Standardised cookware category**
C
Energy consumption EC
cw
**
177.6
Wh/kg
Front
right
heating zone
210x200
mm
Minimum detection
Ø 90
mm
Nominal power*
16
00 W
Booster power*
1850 W
Double Booster power*
-
Standardised cookware category**
A
Energy consumption EC
cw
**
181
.9
Wh/kg
* The given power may change according to the dimensions and material of the pan.
** calculated according to the method of measuring performance (EN 60350-2).

8
Control panel
USE OF THE APPLIANCE
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a “beep” sound.
In the case of a general use press only one key at the same time.
Display
Display Designation Description
0. Zero The heating zone is activated.
1…9 Power level Selection of the cooking level.
U No pan detection No pan or inadequate pan.
A Heat accelerator Automatic cooking.
E Error message Electronic failure.
H Residual heat The heating zone is hot.
P Power The boosted power is activated.
L Locking Control panel locking.
U Keep warm Maintain automatically of 70°C.
II Stop&Go The hob is in pause.
∏Bridge 2 cooking zones are combined.
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically
when the electronic circuit is cooled enough.
Keep
warm
key
Power
key
Power display
Control light
cooking zone
Control light timer
Timer display
Power selection zone “SLIDER”
and timer setting zone
Control light
on/off
Control light
Stop & Go
On/off
key
Stop & Go
key

9
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Induction principle
An induction coil is located under each heating zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
•All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron
and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…
•Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,…
The induction heating zone adapts automatically the size of the pan. With a too small diameter
the pan doesn’t work. This diameter is varying in function of the heating zone diameter.
If the pan is not adapted to the induction hob the display will show [ U ].
Power selection zone “SLIDER” and timer setting zone
To select the power with the slider, slide your finger on the “SLIDER” zone. You can already have
a direct access if you put your finger directly on the chosen level.
Starting-up
•Start up / switch off the hob:
Action Control panel Display
To start Press key [ ] for 2 sec. [ 0 ] are blinking
To stop Press key [ ] for 2 sec. Nothing or [ H ]
•Start up / switch off a heating zone:
Action Control panel Display
Zone selection Press [ 0 ] of the selected zone [ 0 ] and control light on
To set Slide on the “SLIDER“ [ 0 ] to [ 9 ]
(adjust the power) to the right or to the left
To stop Slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
or press on [ 0 ] [ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Power selection zone “SLIDER” and
timer setting zone
“SLIDER“ Direct
access

10
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
•If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
•If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After swittching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don’t touch the heating zones and don’t put any heat
sensitive object on them. There are risks of burn and fire.
Booster and double booster function
The booster function [ B ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles
•Start up / Stop the booster Power function:
Action Control panel Display
Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on
Start up the booster Press key [ B ] [ P ] during 5 min
Stop the booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Or press [ B ] [ 9 ]
•Start up / Stop the super power function:
Action Control panel Display
Selection of the zone Press key [ 0 ] [ 0 ]
Start up booster Press key [ B ] [ P ]
Start up double booster Re-press key [ B ] [ and P ]
Stop the double booster Press key [ B ] [ P ]
Stop booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
•Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone

11
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Select the power level Slide on the “SLIDER“ to [ 7 ] [ 7 ]
Select « Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 6 ] [ 0 fixed ] [ 6 blinking ]
Valid the units Press display [ 06 ] [ 0 blinking ] [ 6 fixed ]
Set the tens Slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 fixed ]
Valid the tens Press display [ 16 ] [ 16 ]
The time is confirmed and the cooking starts.
•To stop the cooking time:
Example for 13 minutes at power 7 :
Action Control panel Display
Zone selection Press display [ 7 ] selected [ 0 ] and control light on
Select « Timer » Press key [ 13 ] [ 13 ]
Desactivate the units Slide on the “SLIDER“ to [ 0 ] [ 1 fixed ] [ 0 blinking ]
Valid the units Press display [ 10 ] [ 1 blinking ] [ 0 fixed ]
Desactivate the tens Slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 fixed ]
Valid the tens Press display [ 00 ] [ 00 ]
•Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].
•Egg timer function :
Example for 29 minutes :
Action Control panel Display
Activate the hob Press display [ ] Zone control lights are on
Select« Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 9 ] [ 0 fixed ] [ 9 blinking ]
Valid the units Press display [ 09 ] [ 0 blinking ] [ 9 fixed ]
Set the tens Slide on the “SLIDER“ to [ 2 ] [ 2 blinking ] [ 9 fixed ]
Valid the tens Press display [ 29 ] [ 29 ]
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer displays blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.

12
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, then reduces automatically its power on the pre-selected level.
•Start-up :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Full power setting Slide on the “SLIDER“ to [ 9 ] Pass from [ 0 ] to [ 9 ]
Automatic cooking Press on “SLIDER” [ 9 ] is blinking with [ A ]
Power level selection Slide on the “SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
•Switching off the automatic cooking :
Action Control panel Display
Zone selection Press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection Slide on the “SLIDER“ [ 1 ] to [ 9 ]
Stop&Go function
This function brakes all the hob’s cooking activity temporarily and allows restarting with the same
settings.
•Startup/stop the pause function :
Action Control panel Display
Engage pause press [ II ] key displays [ II ] in the
during 2s heating zone displays
Stop the pause press [ II ] key pause control light is
during 2s blinking
press an other touch or pause control light is off
slide on the “SLIDER“
Selected power
Automatic cooking
time (Min:S)
1
00:48
2
02
:24
3
03:36
4
05:24
5
06:48
6
02:00
7
02:48
8
03:36
9
-
:
-

13
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
•cooking stages of all cooking zones (power)
•minutes and seconds of programmed cooking zone-related timers
•Keep warm function
The recall procedure is following:
•Press the key [0/I]
•Then simultaneously press the 2 zones back in less than 6 seconds.
The previous settings are again active.
Bridge Function
This function allows to use the 2 cooking zones at same time with the same features as a single
cooking zone. Booster function isn’t allowed.
Action Control panel Display
Activate the hob Press display [ ] [ 0 ] or [ H ] on the
4 displays
Activate the bridge Press on the 2 cooking zones [ 0 ] appears on the front
zone
[ ∏] on the rear zone.
Increase bridge Slide on the “SLIDER “ [ 1 to 9 ] or [ U ]
[ 1 to 9 ] or display [ keep warm ]
Stop the bridge Press on the 2 cooking zones [ 0 ] or [ H ] on the 2
zones
« Keep warm » Function
This function allows to reach and maintain automatically a temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
•To engage, to start the function « Keep warm » :
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]
To engage press [ Keep warm ] on the “SLIDER“ [ U ]
To stop press on display [ U ] selected [ U ]
slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
This function can be started independently on all the heating zones.
When the pan leaves the cooking zone of the "Keep warm" function remains active during
approximately 10 minutes.
The maximum duration of keeping warm is 2 hours.

14
Control panel Locking
To avoid modification of the setting of the cooking zones , in particular during cleaning, the
control panel can be locked (with exception to the On/Off key [ 0/I ]).
•Lock :
Action Control panel Display
Start press key for 2 sec. [ ] [ 0 ] or [ H ] on displays
Hob locking 1. press simultaneously [ B ] and [ 0 ] no modification
from the front right zone
display
2. re-press on [ 0 ] [ L ] on displays
•Unlock :
Action Control panel Display
Start press key for 2 sec. [ ] [ L ] on displays
In the 5 seconds after start:
Unlocking the hob 1. press simultaneously [ B ] and [ 0 ] or [ H ] on displays
[ L ] from the front right zone
2. press on key [ B ] no light on the displays
Power limitation configuration
Before you start the procedure :
•Disconnect the appliance from the electrical network by removing the fuse or turning the
circuit breaker off
•Reconnect the table to the electrical network.
•It is necessary to start the procedure within 2 minutes after the connection of the hob to
the electrical network.
•Do not press the [ ] key.
Modification of the limitation of power:
1) Press the key n°2 and hold down.
2) The symbol [ ] will appear on each display
3) With your other hand, press successively and
quickly (less than 2s) on each [ ] display. Begin
from the front right side and turn contrary clockwise
as described on the picture (a -> b -> c -> d)).
A double "beep" means an error occurred.
If so, start again from item 1).
4) Remove the fingers of the keys. In the back left display a "C" and a"0" appear flashing
alternately. Meanwhile a standing “0” is displayed in the font left zone.
5) Select the back left key, then change "C0" in "C1" by means of position of your finger at
the end of the "SLIDER".
6) Select the front left key.
7) Program the desired configuration wished by means of the "SLIDER", the beginning to
decrease and the end to increase:
- config 0: 7,4kW
- config 1: 2,8kW
- config 2: 3,5kW
8) Select key n°1 during 2s to validate the configuration.
The total power of the hob when delivered is limited to 7400 W.
a
d
c
b

15
COOKING ADVICES
Pan quality
Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
•Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
•A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.
The composition of the pan base can affect the evenness of the cooking results and power
reception by the inductors.
Only use pots and pans with smooth bases. Rough bases will scratch the ceramic glass.
Where possible, use pans with vertically straight side. If a pan has angular sides, induction also
acts on the side of the pan. The sides of the pan may discolour.
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.

16
Examples of cooking power setting
(the values below are indicative)
1 to 2 Melting
Reheating
Sauces, butter, chocolate, gelatine
Dishes prepared beforehand
2 to 3 Simmering
Defrosting
Rice, pudding, sugar syrup
Dried vegetables, fish, frozen products
3 to 4
Steam
Vegetables, fish, meat
4 to 5 Water Steamed potatoes, soups, pasta,
fresh vegetables
6 to 7 Medium cooking
Simmering
Meat, lever, eggs, sausages
Goulash, roulade, tripe
7 to 8
Cooking
Potatoes, fritters, wafers
9 Frying, roosting
Boiling water
Steaks, omelettes, fried dishes
Water
P Boiling water scallops, steaks
Boiling significant quantities of water
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot because they are risk of burn.
•Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then
rinse with cold water and dry the surface thoroughly.
•Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches
must be absolutely avoided.
•Do not ever use any steam-cleaner or pressure washer.
•Do not use any object that may scratch the ceramic glass.
•Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your
ceramic hob or on the pan. Sliding rough saucepans will scratch the surface.
•Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the
surface being damaged.
WHAT TO DO IN CASE OF A PROBLEM
When the symbol [ E 4 ] appears :
•The table must be reconfigured. Please implement the following steps :
I) Important : before you start, make sure there is no more pot on the hob
II) Disconnect the appliance from the grid by removing the fuse or turning the circuit
breaker off
III) Reconnect the table to the grid
IV) Procedure : take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm
* start the procedure within 2 minutes after reconnecting the hob to the grid
* don’t use the [ 0/I ] touch

17
V) First step : cancel the existing configuration
1) Press the touch [ P ] and hold down
2) The symbol [ .] will appear on each display
3) With your other hand, press successively
and quickly (less than 2s) on each [ .] display.
Begin from the front right side and turn
contrary clockwise, as described on the
picture (from a to d).
A double "beep" means an error occured. If so, start again from item 1).
4) Remove your fingers from the touch control, then push again on touch [ 0/I ]
during few seconds, until blinking [ E ] symbols appear.
5) Wait until [ E ] symbols stop blinking.
6) After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup
has been cancelled.
Note : For induction hobs with 3 cooking zones, as the right front zone doesn’t exist
in this case, begin the procedure with the right rear zone (b).
VI) Second step : new setup
1) Take a ferromagnetical pot with a minimum diameter of 16 cm
2) Select a cooking zone by pushing on the corresponding [ C ] display
3) Place the pot on the area to be set
4) Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now
configured.
5) Follow the same procedure for each cooking zone with a [ C ] display.
6) All the cooking zones are configured once all the displays are turned off.
Please use the same pot for the whole procedure.
Never put several pots together on the zones during the setup-process.
•If [ E 4 ] displaying remains, please call the customer care
The hob or the cooking zone doesn’t start-up:
•The hob is badly connected on the electrical network.
•The protection fuse cut-off.
•The looking function is activated.
•The sensitive keys are covered of grease or water.
•An object is put on a key.
The control panel displays [ U ]:
•There is no pan on the cooking zone.
•The pan is not compatible with induction.
•The bottom diameter of the pan is too small.
The control panel displays [ E ]:
•Disconnect and replug the hob.
•Call the After-sales Service.
One or all cooking zone cut-off:
•The safety system functioned.
•You forgot to cut-off the cooking zone for a long time.
•One or more sensitive keys are covered.
•The pan is empty and its bottom overheated.
•The hob also has an automatic reduction of power level and breaking Automatic overheating
Continuous ventilation after cutting off the hob:
•This is not a failure, the fan continuous to protect the electronic device.
•The fan cooling stops automatically.
P
a
d
c
b

18
The automatic cooking system doesn’t start-up:
•The cooking zone is still hot [ H ].
•The highest power level is set [ 9 ].
The control panel displays [ L ]:
•Refer to the chapter control panel locking page.
The control panel displays [ U ]:
•Refer to the chapter “Keep warm“.
The control panel displays [ II ]:
•Refer to the chapter “Pause“.
The control panel displays [ ] or [ Er03 ] :
•An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ E H ] :
•The hob is overheated, let it cool and then turn it onagain.
The control panel displays [ E3 ] :
•The pan is not adapted, change the pan.
The control panel displays [ E6 ] :
•Defective network. Control the frequency and voltage of the electrical network.
The control panel displays [ E8 ] :
•The air inlet of the ventilator is obstructed, release it.
The control panel displays [ E C ] :
•Configuration error. Set the table again, referring to the chapter "The [E 4] appears."
If one of the symbols above persists, call the SAV.
ENVIRONMENT PRESERVATION
•The materials of packing are ecological and recyclable.
•The electronic appliances are composed of recyclable, and sometimes harmful materials
for the environment, but necessary to the good running and the safety of the appliance.
•Don't throw your appliance with the household refuses
•Get in touch with the waste collection centre of your
commune that is adapted to the recycling of the household appliances.

19
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforce in his home country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Fitting - installing:
The cut out sizes are:
Cut size
Cut size flush mounting
Glass size
Ref.
Width
Depth
Width
Depth
Radius
Width
Depth
Thickness
P604IM2B2NE
-
20
560
490
596
52
6
8
590
520
4
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection sheet (3).

20
•Ensure that there is a distance of 50 mm between the hob and the wall or sides.
•The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
at one side. On the other side, however, no unit or divider must stand higher than
the hob.
•The piece of furniture or the support in which the hob has to be fit, as well as the edges of
furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100 °C.
•The mural rods of edge must be heat-resisting.
•Not to install the hob to the top of a not ventilated oven or a dishwasher.
•If a drawer is below the hob, to guarantee a good air circulation and good cooling system
of the appliance, maintain a gap of 30 mm minimum between the bottom of the drawer
and the inferior part of the hob.
•If a drawer is placed under the hob, avoid to put into this drawer flammable objects
(for example: sprays) or not heat-resistant objects.
•Materials often used to make worktops expand on contact with water. To protect the cut
out edge, apply a coat of varnish or special sealant. Particular care must be given to
applying the adhesive joint supplied with the hob to prevent any leakage into the
supporting furniture. This gasket guaranties a correct seal when used in conjunction with
smooth work top surfaces.
•The distance between the hob and the cooker hood placed above must respect the
indications of the hood manufacturer. In case of absence of instructions respect a
minimumdistance of 760 mm.
•The connection cord should be subjected, after building, with no mechanical constraint,
such for example of the fact of the drawer.
•WARNING: Use only hob guards designed by the manufacturer of the cooking appliance
or indicated by the manufacturer of the appliance in the instructions for use as suitable or
hob guards incorporated in the appliance. The use of inappropriate guards can cause
accidents.