Bertini DL1302B4NR User manual

CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
0-65857-16492-3
NOTE:
UPC CODE:
THIS INSTRUCTION BOOKLET
www.bertinibaby.com
KEEP FOR FUTURE REFERENCE.
Date of purchase:
Lot number:
_______ / _______ / _______
_____________________________________
(TAKEN FROM CARTON)
INSTRUCTION MANUAL
Model No:
4 IN 1 CRIB
DL1302B4NR (NATURAL RUSTIC)
DO NOT RETURN PRODUCT TO THE RETAILERS.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [e-mail]

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*NEVER use bed with children under 15 months or over 50 lbs.
*ALWAYS follow assembly instructions.
*
*NEVER suspend strings over a bed.
*
*CAUTION
Follow warnings on all products in a crib.
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and
between bed parts can entrap head and neck of a small child.
STRANGUALTION HAZARD. NEVER place bed near windows where cords from blinds
NEVER place items with a string, cord, or ribbon around a child's neck, such as hood
strings or pacifier cords. These items can catch on bed parts.
ENTRAPMENT HAZARD. To avoid dangerous gaps, any mattress used on this bed
shall be a full-size crib mattress at least 51-5/8 inches (1310 mm) in length, 27-1/4
inches (690 mm) in width, and a max thickness of 6 inches (150 mm).
When child is able to pull to standing position, set mattress to lowest position and remove
bumper pads, large toys and other objects that could serve as steps for climbing out.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES
BY 51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6
INCHES (15CM).
Never use plastic shipping bags or other plastic film as mattress covers because they can
cause suffocation.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their
backs to sleep, unless otherwise advised by your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place items with a string around a child's neck,
such as hood strings or pacifier cords. DO NOT suspend strings over a crib or attach
strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or
clothing on loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
Failure to follow these warnings and assembly instructions could result in serious injury or
death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE
USE.
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts
or sharp edges before assembly and frequently during use. Securely tighten loose bolts and other
fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact a customer
service representative at 1-800-295-1980 for replacement parts and instructional literature if
needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place
additional padding under an infant.
Stop using the crib when child begins to climb out or reaches the height of 35 inches (89
cm).
WARNING
CUSTOMER SERVICE
You can also contact us by writing to the address listed below. Please include the product model number, color and
a detailed description of your enquiry.
Dorel Living - Customer Service Department
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1

*
*
*
*
*
*
Dorel warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of
original purchase from authorized retailers. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of
defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. The warranty does
not cover wearing, tearing, fading or splitting of the fabric (where applicable). This
warranty gives you specific legal rights and you may also have other rights which vary
from State to State or Province to Province.
CAUTIONS: Adult assembly required.
WARNING: Should this product become
damaged, and/or components are broken or missing,
DO NOT USE.
Assembly will require two people.
Estimated assembly time: 30 minutes.
CARE, CLEANING AND MAINTENANCE
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage
wood furniture.
Check all bolts, screws and fasteners periodically and tighten them if necessary.
1-YEAR LIMITED WARRANTY
NOTES AND INSTALLATION
Assemble on a soft, smooth surface to prevent damage to product finish.
Phillips head screw driver is not included.
DO NOT use power tools.

HARDWARE LIST
1 2
3 4
5 6
7 8
Ø5/16" X 13 X 1.5mmT
SPRING WASHER
16 PCS
SPRING WASHER
20 PCS
4 IN 1 CRIB
DL1302B4NR
MATTRESS SUPPORT BOLT
16 PCS
BOLT
6 PCS
BOLT
14 PCS
ALLEN KEY
1 PC
WOOD DOWEL
15 PCS
Ø8mm X 30mm
Ø1/4" X 11 X 1.2mmT
Ø1/4" X 15mm X 51mm
Ø1/4" X 15mm X 80mm
Ø1/4" X 15mm X 15mm
30 X 15mm X 7.5mm
CURVED NUT
6 PCS

PARTS LIST
A B C
D E F
G H
MATTRESS SUPPORT
1 PC
4 IN 1 CRIB
DL1302B4NR
LEFT SIDE PANEL
1 PC
HEADBOARD
1 PC
LEFT POST
1 PC
FRONT RAIL
1 PC
RIGHT SIDE PANEL
1 PC
FRONT PANEL
1 PC
RIGHT POST
1 PC

4 IN 1 CRIB
DL1302B4NR
CRIB ASSEMBLY INSTRUCTION
NOTE: When inserting bolts, turn clockwise until tighten. Then loosen 1/2 -
3/4 of a turn. After crib is completely assembled, return to each bolt and
tighten. Use wax or soap on all bolts to facilitate assembly.

STEP 1
4 IN 1 CRIB
DL1302B4NR
Attach the front rail (G) to the front panel (F) with wood dowels (6) as shown.
F
G
6

STEP 2
4 IN 1 CRIB
DL1302B4NR
Insert wood dowels (6) into front panel (F) and front rail (G).
Attach left and right front posts (A & B) to front panel (F) and front rail (G) with bolts (1),
curved nuts (4), and spring washers (8) as shown.
Use Allen key (5) to tighten all bolts (1).
6
4
1
8
B
F
G
A

STEP 3
4 IN 1 CRIB
DL1302B4NR
Insert wood dowels (6) into the left post (A).
Attach the left side panel (D) to the left post (A) with bolts (1), curved nut (4) and spring
washers (8) as shown.
Use Allen key (5) to tighten all bolts (1).
Repeat this step to attach right side panel (E) to the right post (B).
6
4
1
8

STEP 4
4 IN 1 CRIB
DL1302B4NR
Attach mattress support (H) to the posts with mattress support bolts (3) and spring washers (7).
Use Allen key (5) to tighten the bolts (3).
A
F
E
D
B
H
3
7
NOTE: The above photos and drawings showing how to properly attach the
CORRECT
"THIS SIDE UP" label
shows which side to
face upward.
CORRECT
*Tabs on corners of
mattress support should

STEP 5
4 IN 1 CRIB
DL1302B4NR
Attach headboard (C) to the left and right side panels (D) & (E) with bolts (2), wood
dowels (6) and spring washers (8) as shown.
Use Allen key (5) to tighten bolts (2).
6
2
8
A
B
C
D
E
F
H

WARNINGS:
*ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15CM).
*The toddler bed or day bed is not intended for children under 15 months of age or over
50 lbs (22.7 kgs).
STEP 1: Detach the front panel (F) from the right post (B) and the left post (A) with Allen Key (5).
STEP 2: If mattress support (H) is not in the lowest position, unscrew bolts (3) from left & right
front posts (A & B) and side panels (D & E) and move to the lowest position.
STEP 3: Ensure all bolts are tightly secured.
STEP 1: Follow step 2 to 3 of the crib assembly instructions but ignore front panel (F) in step 2.
4 IN 1 CRIB
DL1302B4NR
TODDLER BED & DAY BED ASSEMBLY: STARTING FROM CRIB
TODDLER BED & DAY BED ASSEMBLY: STARTING FROM SCRATCH
A
C
E
D
B
G
H

4 IN 1 CRIB
DL1302B4NR
FULL SIZE BED ASSEMBLY INSTRUCTION
(HEADBOARD ONLY)
NOTE: FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAMS ARE FOR REFERENCE
ONLY. BED RAILS MAY DIFFER FROM ILLUSTRATION.
DIAGRAM 2
IMPORTANT: STORE ALL EXTRA PARTS THAT YOU ARE NOT USING FOR POSSIBLE FUTURE
USE AS YOU MAY WISH TO CONVERT AGAIN. ALWAYS STORE THE ASSEMBLY
INSTRUCTIONS IN THE POUCH ATTACHED TO THE MATTRESS SUPPORT (H).
STEP 1
Attach the full size conversion rails (not included) to the headboard (C) .
DIAGRAM 1
C
C

4 IN 1 CRIB
DL1302B4NR
FULL SIZE BED ASSEMBLY INSTRUCTION
(HEADBOARD ONLY)
STEP 1
Attach the full size conversion rails (not included) to headboard (C) and assembled footboard
(A,B,F&G).
NOTE: FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAMS ARE FOR REFERENCE
ONLY. BED RAILS MAY DIFFER FROM ILLUSTRATION.
DIAGRAM 4
IMPORTANT: STORE ALL EXTRA PARTS THAT YOU ARE NOT USING FOR POSSIBLE FUTURE
USE AS YOU MAY WISH TO CONVERT AGAIN. ALWAYS STORE THE ASSEMBLY INSTRUCTIONS
IN THE POUCH ATTACHED TO THE MATTRESS SUPPORT (H).
C
A
B
F
G
DIAGRAM 3

That's it ! You've finished assembling your 4 in 1 convertible crib!
4 IN 1 CRIB
DL1302B4NR
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
ANY MATTRESS USED IN THIS CRIB MUST
BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A
THICKNESS NOT EXCEEDING 6 INCHES
(15CM).
Stop using crib when child begins to
climb out or reaches the height of 35
inches (89 cm).
Maximum weight not to exceed 50 pounds
when used as a crib.
The TODDLER BED or DAY BED is not
intended for children under 15
months of age or over 50 pounds
DO NOT RETURN PRODUCT TO THE RETAILERS.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [e-mail]

DL1302B4NR (NATURAL RUSTICO)
CÓDIGO UPC:
0-65857-16492-3
PARA REFERENCIA FUTURA.
Numero de lote:
(UBICADO EN EL CARTÓN)
Fecha de compra:
______ / ______ / ______
www.bertinibaby.com
NOTA:
ESTE MANUEL DE INSTRUCCIONES
CONTIENE INFORMACIÓN DE
SEGURIDAD IMPORTANTE.
POR FAVOR LÉALO Y CONSÉRVELO
MANUAL DE INSTRUCCIONES
Modelo No:
CUNA 4 EN 1
NO DEVUELVA EL PRODUCTO A LA TIENDA. Si falta una pieza
o está dañada, contacte nuestro departamento de servicio a la
clientela. Reemplazaremos la pieza SIN cargo.
Tel #: [phone]
Correo electrónico : [email protected]

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*NUNCA utilizar la cama para un niño menor de 15 meses o que pese más de 50 lbs.
*SIEMPRE siga las instrucciones de ensamblaje.
*
*NUNCA cuelgue cordones por encima de una cama.
*
*
Remplazar la barandilla para dentición si está dañada o floja (si una barandilla de dentición está incluida
con este modelo)
PRECAUCIÓN: TODO COLCHÓN UTILIZADO EN ESTA CUNA DEBE SER DE POR LO MENOS 27-
1/4 PULGADAS POR 51-5/8 PULGADAS (69CM POR 131CM) CON UN ESPESOR NO MAS DE 6
PULGADAS (15CM).
Los niños pueden asfixiarse si quedan atrapados en espacios entre los lados de la cuna y un colchón
demasiado pequeño.
Siga las advertencias en todos los productos en una cuna.
PELIGRO DE ESTRANGULACIÓN. NUNCA coloque la cama cerca de una ventana donde los cordones
de persianas o cortinas podrían estrangular al niño.
NUNCA cuelgue objetos con un cordón, cuerda o cinta al cuello del niño, tales como capuchas con
cordón o chupetes. Estos objetos pueden quedar atrapados entre las partes de la cama.
PRECAUCIÓN
PELIGRO DE BLOQUEO. Para evitar los espacios peligrosos, todo colchón utilizado con esta cama
debe ser un colchón de tamaño normal de por lo menos 51-5/8 pulgadas (1310 mm) de largo, 27-1/4
pulgadas (690 mm) de ancho y un máximo de 6 pulgadas (150 mm).
Antes de cada uso o de armarla, inspeccione la cuna y asegúrese de que no hayan piezas dañadas,
uniones flojas, piezas que falten o bordes filosos. NO use la cuna si faltan piezas o están rotas. Pida al
vendedor o escriba a nuestro representante de servicio al cliente (1-800-295-1980) para obtener piezas de
recambio e instrucciones si es necesario. NO substituya piezas.
Los bebés pueden asfixiarse con accesorios blandos. Nunca agregue almohadas, edredones o relleno.
ALGUNOS NIÑOS HAN MUERTO EN LA CAMA PORQUE QUEDARON ATRAPADOS. La cabeza o el
cuello de un niño pueden quedar atrapados en espacios entre las partes de la cama.
Para reducir el riesgo de SMSL, los pediatras recomiendan que los bebés con buena salud duerman
boca arriba, a menos que su médico le dé otras recomendaciones.
NO coloque la cuna cerca de una ventana donde el niño podría ahorcarse con los cordones de persianas
o cortinas.
¡Los cordones pueden causar estrangulamiento! NO coloque objetos con un cordón al cuello del niño,
como el cordón de una capucha o de un chupete. NO cuelgue cordones sobre la cuna ni ate juguetes con
cordones.
Para prevenir el riesgo de estrangulación ajuste todas las uniones. La ropa o partes del cuerpo del niño
pueden quedar atrapados en uniones flojas.
Si cambia la terminación de la cuna, utilice un material no tóxico recomendado para productos para niños.
Cuando el niño sea capaz de pararse, coloque el colchón en la posición más baja y retire almohadillas,
juguetes grandes y otros objetos que podrían servir para que el niño trepe.
Nunca use bolsas ni películas plásticas como cobertura para el colchón, porque pueden causar asfixia.
Cuando el niño pueda pararse o llegue a 35" (89 cm) de altura, no debe seguir usando esta cuna.
SERVICIO AL CLIENTE
También puede contactarnos escribiendo a la dirección que figura a continuación. Por favor incluya el número de modelo del
producto, el color y una descripción detallada de su pregunta.
DHP Consumer Services
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1
ADVERTENCIA
Si no se siguen estas advertencias e instrucciones al armar la cuna, el niño podría sufrir lesiones graves o
morir.
Lea todas las instrucciones antes de armar la cuna. CONSERVE LAS INSTRUCCIONES PARA USO
FUTURO.

*
*
*
*
*
*
*
Quítele el polvo regularmente con un paño limpio y seco para evitar que haya acumulación. De vez en cuando
se puede usar un paño húmedo para limpiar la superficie. Séquelo inmediatamente. No utilice productos
abrasivos que puedan dañar el lustre. La exposición excesiva a la luz solar y a cambios extremos de
temperatura y humedad puede dañar la madera del mueble.
Verifique los pernos y tornillos periódicamente y ajústelos si es necesario.
GARANTÍA LIMITADA DE 1 AÑO
Dorel garantiza que este producto está libre de defectos de material y mano de obra y se
compromete a remediar cualquier defecto de este tipo. Esta garantía cubre 1 año a partir de la
fecha de compra original. Esta garantía es válida solamente con presentación de una prueba
de compra. Esto se limita a la reparación o reemplazo de componentes defectuosos del mueble
y no se incluye ningún trabajo de ensamblaje. Esta garantía no se aplica a ningún producto que
haya sido mal ensamblado, sujeto a mal uso o abuso, o que haya sido alterado o reparado de
cualquier manera. Cualquier uso, rotura o pérdida de color de la tela no están incluidos en esta
garantía (donde corresponda). Esta garantía le da derechos legales específicas y usted puede
también tener otros derechos que varían de estado a estado o de provincia a provincia.
ADVERTENCIA: Si este producto está dañado y/o
ciertas piezas faltan o están rotas, NO LO USE.
Ármela sobre superficies blandas y suaves para evitar dañar el pulido del producto.
El destornillador de cabeza Phillips no está incluido.
No use herramientas eléctricas.
Precaución: Un adulto debe armarla.
Se necesitan dos personas para armarla.
Tiempo estimado para armarla: 30 minutos.
CUIDADO, LIMPIEZA Y MANTENIMIENTO
NOTAS E INSTALACIÓN
Asegúrese de tener todas las piezas y componentes antes de comenzar a armarla.

LISTA DE ACCESORIOS
1 2
3 4
5 6
7 8
LLAVE ALLEN
1 PZA
CLAVIJA DE MADERA
15 PZAS
Ø1/4" X 11 X 1.2mmT
Ø5/16" X 13 X 1.5mmT
ARANDELA RESORTE
16 PZAS
ARANDELA RESORTE
20 PZAS
Ø1/4" X 15mm X 15mm
30 X 15mm X 7.5mm
PERNO DE SOPORTE DE COLCHÓN
16 PZAS
TUERCA CURVADA
6 PZAS
Ø8mm X 30mm
CUNA 4 EN 1
DL1302B4NR
Ø1/4" X 15mm X 51mm
Ø1/4" X 15mm X 80mm
PERNO
14 PZAS
PERNO
6 PZAS

LISTA DE PIEZAS
A B C
D E F
G H
SOPORTE ANTERIOR
1 PZA
SOPORTE DE COLCHÓN
1 PZA
LADO IZQUIERDO
1 PZA
LADO DERECHO
1 PZA
PANEL ANTERIOR
1 PZA
PATA IZQUIERDA
1 PZA
PATA DERECHA
1 PZA
CABECERA
1 PZA
CUNA 4 EN 1
DL1302B4NR