Besantek BST-DL116 User manual

BST-DL114 / BST-DL115/BST-DL116/BST-DL117
Wireless Monitor Temperature Humidity
Data Logger
Manual
V1.0
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

CONTENTS
Chapter I product introduction ....................................................................1
1.1 Product Features....................................................................................................................................1
1.2 Range of Application...............................................................................................................................2
1.3 Performance parameters........................................................................................................................2
1.4 BST-WDL07 wireless basE station appearance diagram ......................................................................2
1.5 Wireless data logger with LCD display...................................................................................................3
1.6 Wireless data logger LCD Symbol Description ......................................................................................3
1.7 Install battery .........................................................................................................................................4
Chapter II Software Usage Guide.................................................................5
2.1 Install software........................................................................................................................................5
2.2 Set RJ45 module in BST-WDL07 wireless basic station.......................................................................5
2.3 BSTServer software ...............................................................................................................................6
2.3.1 Open and running software..........................................................................................................6
2.3.2 System Settings...........................................................................................................................7
2.3.3 Communication Settings..............................................................................................................7
2.3.4 User Managemen ........................................................................................................................8
2.3.5 Partition managemen...................................................................................................................8
2.3.6 Device managemen.....................................................................................................................9
2.3.7 Real-time curve button...............................................................................................................10
2.3.8 Text display button ..................................................................................................................... 11
2.3.9 Previous area / next area button................................................................................................ 11
2.3.10 Monitor list button..................................................................................................................... 11
2.4 View and export the data to be uploaded............................................................................................. 11
Chapter III Precaution.................................................................................14
3.1 Precaution.............................................................................................................................................14
3.2 FAQ.......................................................................................................................................................14

1
Chapter I Product Introducon
Besantek wireless temperature and humidity recorder design of a high-speed, intelligent temperature and
humidity recorder. The instrument uses wireless data transmission method to collect and record temperature an
d
humidity data. It comes with record memory, can store 8192 sets of data, can realize remote real-me monitoring
of warehouses, laboratories, refrigerators, cold storage and other environments, using 2.4G wireless network to
send data without wiring, simple operaon, reliable performance.
1.1 Product Features
（1）Zigbee to RJ45 wireless relay technical parameters
Wireless transmission rate: 115200bps.
The number of wireless recorder can be Max connected to 32 units.
Support frequency band number: 15 frequency bands
Wireless Interface: Zigbee ad hoc network, automacally find the best link to transmit data
built-in RJ45 interface, will receive the wireless data from LAN and transmit data to the server
Can be used as relay / gateway at the same me, used for receiving wireless s ignal sent by wireless
temperature and humidity recorder.
Power : 12V DC adapter
(2) Wireless recorder technical parameters
Wireless transmission rate: 115200bps.
LCD resoluon: temperature 0.1 ℃/ humidity 0.1% RH.
Sound and light alarm (LED lights + buzzer). More than any channel set the upper and lower limits, then
automacally alarm.
Switzerland imported integrated temperature and humidity sensor.
recording interval: 2s-24h
Support connue transferring from breakpoint funcon.
Wireless transmission rate: 115200bps, the maximum transmission distance: 50-500 meters (test data in
empty without blocking environment).
Use Zigbee 2.4G wireless network

2
1.2 Range of Application
Widely used in agricultural research, food, medicine, warehouses, cold storage, refrigerator, computer room,
chemical industry, meteorology, environmental protecon, electronics, laboratory and other fields of temperature
and humidity monitoring.
1.3 Performance parameters
1.4 BST-WDL07 wireless base station appearance diagram
Model Measurement
Accuracy
Measurement
Range
Probe Type
(T:Temperatur; H:Humidity)
Capacity of
Records
BST-DL114 ±0.5℃/±3%RH
-20～70℃
0
～
100%RH
T&H
8,192
BST-DL115 ±0.5℃/±3%RH
-40～85℃
0～100%RH T&H External
BST-DL116
±0.5℃-40～85℃Double T External
BST-DL117
±2℃-100～200℃Thermocouple Type K

3
BST-WDL07
Ethernet interface(RJ45)
12V DC power interface
Antenna
1.5 wireless data logger with LCD display
LCD display Wall-mounted back cover
LCD indicator Back cover screw-fixed posion
USB port & DC power Jack (9-12V)
1.6 LCD Symbol Description
Battery symbol DC power symbol
Signal symbol Auto logging symbol
Wireless symbol Selectable ℃/℉symbol
Temperature display area Humidity symbol
Humidity display area

4
1
.7 Install battery
Loosen the back cover screw with the screwdriver, and install 4*1.5V AA batteries according to th
e
d
irecon of the battery.
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

5
Chapter II Soware Usage Guide
2.1 Install software
（1）Put Monitor soware CD-ROM into the drive, copy BSTServer soware to the computer hard disk.
(note: do not install in C disk, prevent the operang system crash data loss, is beneficial to protect
data.)
（2）open the folder and find the BSTServer
2.2 Set RJ45 module in BST-WDL07 wireless basic station
BST-WDL07 connect 12V power supply and RJ45 network port, open Lanconfig in the folder, pop-up interface
as shown below:
(1) Click [Search ] to search the device, the right half of the interface will display the name and IP address of
wireless basic staon that has been connected to LAN. Note: The LanConfig soware uses the UDP
broadcast protocol to search the module, ensuring that the firewall or anvirus soware does not block
the software.
(2) select the serial number of the selected BST-WDL07 wireless base staon and double-click to obtain the
property.
(3) Instrument Name: can be modified according to actual needs.(Note: the factory seng is the instrument
serial number)
(4) Work Model: : set to TCP Client mode.

6
(5) Baud Rate: set to 115200
(6) DHCP Mode Relay Service: select Disable offstate. It is recommended to choose a fixed IP address to ensure
network stability.
(7) IP Address/Net Make/IP Gateway: modify IP informaon, the Gateway should be consistent with the current
LAN, and the IP Address is BST-WDL07 wireless base staon IP address(note: this IP should not conflict with
other instrument IP)
(8) Server IP: This IP address is the same as the fixed IP address of the controlling computer.
(9) Server Port: The default is 4588 Same as the TCP listening port of ToMonitor soware
（
10）Click [Synchronize] to submit changes, a "Change Device Informaon Success" dialog box will pop up, and
click to confirm finally.
2.3 ToMonitor software
2.3.1 Open and running soware
The instrument is powered on, the BST-WDL07 is powered on and connected to the Ethernet.
Double click , Click [Login] button to enter the login interface as shown below, the inial user
name and password are "admin" (not case-sensive).
Aer successful login to ToMonitor soware, the toolbar and menu keys are all acvated, as shown below:

7
2.3.2 System Setngs
Click , The following dialog box will pop up:
(1) custom soware name: customize the soware tle name according to actual requirements.
(2) Set the window arrangement number.
(3) record keeping interval
2.3.3 Communicaon Setngs
Click , The following dialog box will pop up:
Wireless Server Port Setngs:
a. TCP listening port (RJ45): 4588 (BST-WDL07 wireless base staon to set this port)
(1)
(2)
(3)

8
b. USB Port (USB): port selecon COM1 ~ COM9(RS485 base staon to set this port, the Port number is
consistent with the USB Port number that connects devices)
2.3.4 User Management
Click , Pop-up the following dialog box, add the user name as needed:
2.3.5 Paron management
Click ,Pop-up the following dialog box, add parons as needed:
a
b

9
Note: After add a new recorder must be divided into regions, otherwise the window page will not display the
new recorder monitoring
2.3.6 Device management
Click , The following dialog box will pop up:
Type of instrument

10
(1) [Basic Setngs] Logger parameter setngs
Name: can be named according to the actual situaon, the name of each instrument can not be repeated.
Serial Number: Enter the 10-digit serial number posted on the instrument.
Instrument Type: Set to "Wireless Instrument".
Sampling interval (minutes): The refresh interval of instrument data can be set according to the actual situaon.
The number of sensors: select a single channel shows only 1 (only display the data of a channel, single
temperature recorder can select this), select dual channel display 2 (display two channels of data, temperatur
e
and humidity recorder can select this ).
（2）[Sensor I]
High : the upper limit can be set. When the set value is exceeded, the monitoring value is displayed in the red font
.
Please set the alarm mode to send the alarm informaon according to the actual demand.
Low : the lower limit can be set. When the set value is exceeded, the monitoring value is displayed in red font.
Please set the alarm mode to send the alarm informaon according to the actual demand.
Type: temperature/humidity (please choose according to the type of purchase recorder).
（3）[Sensor II]
High / low : The upper limit and lower limit can be set according to the actual situaon. When the setng value is
exceeded, the monitoring value will be displayed in red font, meanw hile, the alarm informaon will be sent
according to the setng alarm mode.
Type: temperature / humidity
Sound & Light Alarming: Optional working hours are off or open all the me.
Add button funcon: First, select one of the recorder in the dialog box, the properes displayed, enter a new
name and serial number, other parameters set according to the actual situaon, and then click to increase.
Apply button funcon: First, select one of the recorder in the dialog box, set the relevant parameters according t
o
the actual situaon, click the Modify button will pop up to modify the success dialog box, and then click OK.
Delete button funcon: First, select one of the recorder in the dialog box, click the delete button will pop up to
delete the success dialog box, and then click OK.
Exit button: Click the Exit button to exit the Device Management dialog box.
2.3.7 Real-me curve button
Click , The window is displayed as a curve, as shown below:

11
2.3.8 Text display button
Click , The window is displayed as a text number, as shown below:
2.3.9 Previous area / next area button
Click , can switch the window page to view monitor data, the keyboard up and down leand right
buttons can also be switched.
2.3.10 Monitor list button
Click , Show or hide the paron list
2.4 View and export the data to be uploaded
（1）Click BSTClient in BESANTEK software folder and open the software, as shown below:

12
(Note: When ToClient is opened, it is used when ToMonitor is open, otherwise, it will prompt to connect to th
e
server failed and can not view the data)
（2）Login system
(note: the port number is the number of [LAN] add 1, the number of [LAN] shown under ToMonitor, user nam
e
and password are admin)
（3）Click [Query] icon, the following dialog box will pop up. To select the instrument to query, select the
time period to be queried, click [Start Search]
Click connecon
Select instrument
Start Search
Select me period

13
（4）The following dialog box will pop up to check the corresponding data analysis diagram.
（5）Click [ DATALIST ] icon, the following dialog box will pop up and view the real-me data.
（6）Click [PDF] to export the query data to PDF file, and click [BMP] to export the analysis diagram t
o
BMP image file.
Click to view the data

14
Chapter III Precauons
3.1 Precauons
The data logger waterproof grade is IP34, if has water on the case, do not connect USB, to prevent th
e
electronic circuit short circuit under the influence of water. Short circuit may cause damage to th
e
instrument.
The data logger uses ABS fireproof plasc shell, to prevent the corrosion of acid and alkali and othe
r
chemicals for shell.
If it fails, it must be repaired by an authorized professional. Do not repair or modify it by yourself.
The device configured 4*1.5V lithium battery, it can’t be charged and don’t allow short circuit,
otherwise it may be dangerous. Waste battery should be properly handled to protect the environment.
3.2 FAQ
LCD display dim
Cause: The battery is low or the ambient temperature is too low or too high.
Soluon: replace the battery. If it is caused by ambient temperature, please take out the recorde
r
immediately and avoid damage to the recorder.
LOG symbols disappear
Cause: When the battery is low, there will not be enough power to maintain the recording funcon.
Soluon: replace the battery.
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com