Bestarc BTC500DP-3G User manual

IGBT DIGITAL PLASMA CUTTER 110/220V
BESTARC MANUAL
DIGITAL PLASMA CUTTER
BTC500DP-3G
This Manual for Digital Plasma Cutter:
BTC500DP 3 Generation
EC DECLARATION OF CONFORMITY
We hereby declare that our machines for industrial and professional use as stated below.
Model: BTC500DP 3G
Conforms with EMC Directives: 73/23/EEC and 89/336/EEC
European Standard: EN/IEC60974
Please read and understand this instruction manual carefully before the installation and operation
of this equipment. The contents of this manual may be revised without prior notice and
without obligation. This instruction manual is issued on 12 st DEC 2022
Dear Customer,
Thank you for purchasing our Digital Plasma Cutter, Read this manual thoroughly.
Incorrectly installed or improperly grounded equipment is a hazard, and can cause serious
Damage, Properly install and ground this equipment according to this manual and national, state,
and local codes.

PARAMETER:
This is 50Amps digital plasma cutter with pilot arc function.
14mm Quality Cutting thickness at Stainless Steel.
Inverter with Industrial Rated, Lightweight and Portable.
FEATURES
• Latest IGBT Inverter Technology
• Safe torch connection
• High quality cutting torch with quality cable
• Industrial application
• Tolerant to variable power supply
• Quality Air regulator with preset air pressure
• Suitable to cut all electrically conductive materials
• Light weight and compact
• Strong metal housing
What included in package:
• 1 × Plasma cutter
• 1 × Cutting torch
• 1 × Earth clamp with cable
• 2 × Tip (Nozzle)
• 2 × Electrode
• 1 × Air hose

Function:
1. Air Gauge show air pressure.
2. AIR/CUT: AIR for checking if air coming into machine. CUT for Cutting.
3. 110/220V/PT Knob: Adjust the current for 110V/220V, Adjust the time for post air.
4. 2T/4T: Control torch working method, PT for adjust the time of post air blow out for torch head

PLASMA CUTTING TORCH PARTS

BESTARC
PLASMA CUTTER