
IGBT DIGITAL PLASMA CUTTER 110/220V
BESTARC MANUAL
DIGITAL TIG/STICK WELDER
BTC450NP
This Manual for Digital Plasma Cutter:
BTC450NP
EC DECLARATION OF CONFORMITY
We hereby declare that our machines for industrial and professional use as stated below.
Model: BTC450NP
Conforms with EMC Directives: 73/23/EEC and 89/336/EEC
European Standard: EN/IEC60974
Please read and understand this instruction manual carefully before the installation and operation
of this equipment. The contents of this manual may be revised without prior notice and
without obligation. This instruction manual is issued on 11 st Nov 2022
Dear Customer,
Thank you for purchasing our Digital Plasma Cutter, Read this manual thoroughly.
Incorrectly installed or improperly grounded equipment is a hazard, and can cause serious
damage.Properly install and ground this equipment according to this manual and national, state,
and local codes.