BestCon RM4C pro S User manual

Quick Setup Guide
Smart Remote Hub
RM4C pro S / RM4C pro / RM4C
[e-mail]
www.mybestcon.com
bestcon official

4
10
What’s included
After opening package, please check contents as below (unit: mm).
with sensor
cable
Sensor
accessory
USB cableUSB cable with sensor Mounting board
overall length: 1000±50 overall length: 1000±50 size: 28.5 x 28.5 x 5
USB cable
with sensor Bluetooth
DeviceModel
RM4C x1
x1 /
/
/
/
√√√
√√
√√
RM4C pro x1 /
RM4C pro
USB
cable
Mounting
board
1

LED indicator Reset buttonPower input
(Micro USB)
Front
Top Bottom
Back
POWER RESET
50.1
45.7
Overview
2(unit: mm)

POWER RESET
•
When the device is in any condi-
tions, press and hold the reset
button for 5s until the LED indicator
flashes intermittently.
Reset for AP Setup
Flashes intermittently
Device is in Auto-discovery
mode(Bluetooth)
Device is also in AP Setup mode
Flashes slowly then o Device is being set up and added to
network
Flashes
slowly continuously
Device is failed to connect to network
or disconnected from network
Flash once IR/RF signal is sent
Status Indication
Indications
3

Please use standard 5V Micro USB power supply not less than 1A to power the device.
DO NOT use multi-port shared USB power supply.
NOTE
Add Device
4
POWER RESET
Power on
USB power source
Internet & Wi-Fi RouterDownload APP
2.4GHz
Download “BestCon” App from the App Store or Google Play by searching.
Open the App, sign up an account and follow the wizard to set up your home
for first use.
A smartphone or tablet running iOS 11 / Android™ 5.1 or higher.
A 2.4GHz Wi-Fi network with Internet connection.
Power on the device and make sure the LED indicator is flashing intermittently.

Please use standard 5V Micro USB power supply not less than 1A to power the device.
DO NOT use multi-port shared USB power supply.
Mounting to drywall
USB power source
Mounting
5
Sensor accessory
NOTE

[e-mail]
www.mybestcon.com
bestcon official