Bestsign OF1601 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: OF1601
THANK YOU FOR PURCHASING
Important Safety Instructions:
● Please read all instructions before beginning assembly
● Please make sure receive all the parcels to start the assembly
● For your safety and convenience,assembly by two people is recommended
● Use the parts and hardware lists to identify and separate each of the components included
● Save all packing materials until assembly is completed to avoid the accidental discarding
of smaller parts or hardware

X 1 X 1 X 1 X 1 X 1
X 2 X 9 X 1 X 4 X 1
X 3X 3X 3
PARTS LIST
X 3 X 3
X 1X 1 X 1 X 1 X 1
X 2X 1 X 1 X 1 X 1
X 1X 1 X 1 X 1 X 4

HARDWARE LIST
Name Part Qty. Spare Name Part Qty. Spare
AR
31 18
BS
31 1 4
CT
48 1 4
DU
2 4
EV
2 1
FW
64
G10 1
HY
2 1 2
IZ
1 12
JAA
32
KBB
34 2
LCC
22 6
MDD
16 2
NEE
16 2
OFF
54 2 1
PGG
41
Q6
1/2" Screw
9/16" Screw
2" Screw
1-1/2" Screw
5/6" nail
9/16" Screw
1" Screw
7/8" Screw
Bumper
Ø10x4mm
1-7/8" Screw
1
1
1
2
2
X5/8" Screw

STEP 1
STEP 2
x18pcs
x8pcs

STEP 3
STEP 4
x10pcs
x5pcs
123

STEP 5
STEP 6
x5pcs
1
2
3
x8pcs
Finished Side
Inclined Plane
Inclined Plane

STEP 7
STEP 8
x6pcs
Groove
Peel off the adhesive sticker's protective paper and bond it onto
the designated position before secure with nails.
x1pcs
x1pcs
x6pcs
21

STEP 9
STEP 10
With assistant carefully flip the other side.
x2pcs
x4pcs
x18pcs
Peel off the adhesive sticker's protective paper and bond it onto
the designated position before secure with nails.
21
21
x1pcs
x1pcs
x6pcs
21
Peel off the adhesive sticker's protective paper and bond it onto
the designated position before secure with nails.

STEP 11
STEP 12
x8pcs
x8pcs

STEP 13
STEP 14
x2pcs
x2pcs
x1pcs
x4pcs
123
x4pcs

STEP 15
STEP 16
x4pcs
1
2
3
x8pcs
Finished Side
Inclined Plane
Inclined Plane

STEP 17
STEP 18
x6pcs
Groove
Peel off the adhesive sticker's protective paper and bond it onto
the designated position before secure with nails.
x1pcs
x1pcs
x6pcs
21

STEP 19
STEP 20
With assistant carefully flip the other side.
x2pcs
x2pcs
x12pcs
Peel off the adhesive sticker's protective paper and bond it onto
the designated position before secure with nails.
21
21
x1pcs
x1pcs
x6pcs
21
Peel off the adhesive sticker's protective paper and bond it onto
the designated position before secure with nails.

STEP 21
STEP 22
x8pcs
x3pcs
An assistant is required.
Es necesario un ayudante.
Un assistant est nécessaire.
Holes 15 mm in diameter
face the other side

STEP 23
x3pcs
An assistant is required.
Es necesario un ayudante.
Un assistant est nécessaire.

STEP 24

STEP 25
STEP 26
x13pcs
x3pcs
x13pcs
1
2
3

STEP 27
STEP 28
x8pcs
x4pcs
5/6" nail
x1pcs

STEP 29
STEP 30
x4pcs
Finished edge
Borde terminado
Cote fini
x1pcs
x2pcs
x2pcs
x4pcs
1" Screw

STEP 31
DO NOT Insert
Hinge beneath mount
Installation
1
34
2
Adjustment