U-Line H-1376 User manual

PAGE 1 OF 2 0521 IH-1376
WORK STOOL
1-800-295-5510
uline.com
π
ASSEMBLY
PARTS
1. Insert glides into legs of five-star base. Turn base
upright. Insert gas lift into center of base.
(See Figure 1)
Figure 1
Base
Gas Lift
Glide
2. Slide footring onto the gas lift and tighten knob to
secure. (See Figure 2)
Figure 2
Footring
Gas Lift
Knob
Back Cushion x 1 Back Cushion Post x 1 Seat Cushion x 1 Footring x 1
Gas Lift x 1 5-Star Base x 1 Glide x 5

PAGE 2 OF 2 0521 IH-1376
ASSEMBLY CONTINUED
3. Loosen knob on mechanism on bottom of seat
cushion. Insert back cushion post into corresponding
slot on mechanism and tighten knob to secure.
(See Figure 3)
Figure 3
Back Cushion Post
Knob
Seat Cushion
4. Align back cushion with post and use knob to attach
loosely through slot. Set back cushion at preferred
height and tighten knob to secure. (See Figure 4)
Figure 4
Back Cushion
Knob
5. Slowly lower stool assembly onto the gas lift. Press
down on seat to secure. (See Figure 5)
Figure 5
Stool
Assembly
Gas Lift
STOOL ADJUSTMENTS
1
2
3
4
1. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
2. Back Height – To adjust back height, loosen
knob and slide the back up or down. Set back at
preferred height and tighten knob to secure.
3. Seat Depth – To adjust seat depth, loosen knob and
slide the back in or out. Set back at preferred seat
depth and tighten knob to secure.
4. Footring Height – To adjust footring height, loosen
knob and slide the footring up or down. Set footring
at preferred height and tighten knob to secure.
1
-800-295-551
0
uline.com