
1. Take the pool and accessories out of the carton with care. Spread the pool
out onto the selected site.
2. Close the water valve.
3. Insert all the Top Rails into the pole sleeve on the top of the pool. (Fig.1)
Please see the structure photo for detailed directions.
4. Insert both ends of Top Rails into the Connector. Then insert Bolt into the
top of the Connector. (Fig.2) Repeat this procedure for remaining parts.
(Fig.3)
Note: In each Connector, ensure both Top Rails are properly inserted.
5. Attach all Footings to the bottom of the Vertical Pool Legs. Then insert the
Vertical Pool Legs into the bottom of the Connectors. (Fig.4)
6. Test frame to ensure all connections are secure before filling with water.
(Fig.5)
7. Add 1’’ (2 cm) of water into the pool to cover floor. Once pool floor is slightly
covered, gently smooth out all wrinkles. Start at the center of the pool and
work your way clockwise to the outside.
8. Continue to fill the pool until it reaches the water fill line located on the
pool’s interior. Please kindly pay the upmost attention to not over fill the
pool for security reasons.
Dismantling
1. Open water valve on the bottom of the pool, water will drain automatically.
(Check local regulations for drainage by-laws). Then dismantle pool frame
to release water. Make sure you release most of the water within 20
minutes.
Note: Only adults should drain the pool!
2. Air dry the pool.
ATTENTION: Do not leave the drained pool outside.
Repair
If your pool is damaged, use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
Pool Maintenance
Warning: If you do not adhere to the maintenance guidelines covered here in,
your health might be at risk, especially that of your children.
• Change the pool water frequently (particularly in hot weather) or when
noticeably contaminated, unclean water is harmful for the users.
• Please contact your local retailer for chemicals to treat water in your pool.
Be sure to follow the chemical manufacturer’s instructions.
• Proper maintenance can maximize your pool’s lifespan.
• See packaging for water capacity.
Cleaning and Storage
1. After use, clean surfaces gently with a damp cloth.
Note: Never use solvents or other chemicals that may damage the product.
2. Remove all accessories and spare parts of the pool, clean and dry them.
3. Once pool is completely dry, sprinkle with talcum powder to prevent the
pool from sticking together and fold the pool carefully. If pool is not
completely dry, mould may develop, which will damage the pool liner.
4. Store liner and accessories in a cool, dry place out of children’s reach, with
a moderate temperature between 5°C / 41°F and 38°C / 100°F.
5. During rainy season, pool and accessories should be stored as instructed
above.
6. Improper draining of the pool might cause serious personal injury and/or
damage to personal property.
7. Check the product for damage at the beginning of each season and at
regular intervals when in use.
KMART AUSTRALIA - 690 SPRINGVALE RD, MULGRAVE, VIC 3170 AUSTRALIA.
KMART NEW ZEALAND - REGIONAL OFFICE C/O KMART PAPATOETOE STORE
HUNTERS PLAZA, GREAT SOUTH RD, PAPATOETOE, AUCKLAND, NEW ZEALAND.
©2018 Bestway Inflatables & Material Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten/Tutti i diritti riservati
®™ Trademarks used in some countries under license to/
Marques ®™ utilisées dans certains pays sous la licence de/
Marcas comerciales ®™ utilizadas en algunos países bajo la licencia de/
®™ Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/
®™ Marchi utilizzati in alcuni paesi concessi in licenza a
Bestway Inflatables & Material Corp., No.3065 Cao An Road, Shanghai, 201812, China.
Manufactured,distributed and represented in the European Union by/
Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/
Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell'Unione Europea da
Bestway (Europe) S.r.l., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy
Distributed in North America by/Distribués en Amérique du Nord par/Distribuido en Norteamérica por
Bestway (USA) Inc., 3411 E. Harbour Drive, Phoenix, Arizona 85034, United States of America
Tel:1-855-838-3888 (For U.S. and Canada)
Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, 98-104 Carnarvon Street, Silverwater, NSW 2128, Australia
www.bestwaycorp.com
Made in China / Fabriqué en Chine / Fabricado en China / Hergestellt in China / Prodotto in Cina
For support please visit us at:
www.bestwaycorp.com/support
2