Monster Rockin' Roller 4 User manual

MODEL: RR4
USER MANUAL
MUSIC WITHOUT LIMITS
1-800-976-0677 •[e-mail] • MyMonsterAudio.com
Monster and the Monster logo are registered trademarks of Monster Inc., and it’s subsidiaries in the U.S. and other countries, used under license.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
NWS, NOAA, and the NOAA Radio logo are registered trademarks of the National Weather Service in the United States and used with kind permission.

PACKAGE CONTENTS
THANK YOU FOR
CHOOSING MONSTER
Rockin’ Roller 4 AC Power Cable
(Length: 8’)
AUX Cable
(Jack: 3.5mm; Length: 6’)
Microphone
(Jack: ¼”; Length: 8’)
2-Piece Stacking Lock
Assembly
(incl. Screws x8)
User Manual &
Quick Start Guide
Included with your Rockin’ Roller 4 purchase:
Congratulations on your Rockin’ Roller 4 indoor/
outdoor wireless speaker. Please take your time to
explore all of the features and utilities we have built
into this product.
We put all of our products through rigorous testing
and quality control. We take great pride in presenting
this product to you now. For your peace of mind,
we oer a one-year limited warranty against
manufacturing defects and workmanship. Please
refer to the warranty section of the user manual for
more details.
For more information on all of our products,
please visit: MyMonsterAudio.com.
FOLLOW US:
@MyMonsterAudio
@MyMonsterAudio
/MyMonsterAudio

PRODUCT CONTROLS 1
POWER & BATTERY
•Power/Charging 2
•AC Pass Through Outlet 2
•Battery Level Indicator 2
•USB Power Banks 2
AUDIO
•Bluetooth Pairing 3
•NFC Pairing (Android Devices) 3
•¼” Guitar/Mic Inputs & Gain/Echo Controls 4
•AUX-IN (3.5 mm) 4
•True Wireless System (TWS) 4
•Bass/Treble Adjustment 5
•AM/FM Radio 5
•NOAA Weather Radio (NWR) 5
•Equalizer Presets (Bluetooth/AUX-IN ONLY)5
TABLE OF CONTENTS
•Saving Radio Stations (AM/FM/NOAA) 6
•Line Out (3.5mm) 6
FEATURES
•Standby Mode 6
•Telescoping Handle 6
•Stacking System 7
•LED Lights 7
TROUBLESHOOTING 8
SPECIFICATIONS 9
IMPORTANT SAFETY INSTRUCTIONS 10
LIMITED WARRANTY 11
FCC WARNING STATEMENT 12

SOURCE
TWS
SOURCE
TWS
1
Control Panel
Side Panel
LED Display
Control Panel
1. MIC ¼” Input
2. MIC/GUITAR ¼” Input
3. GAIN Knob (x2)
4. ECHO Knob (x2)
5. USB Power Bank (x2)
6. LED Display
7. LINE OUT
8. AUX IN
9. BASS/TREBLE Button
10. BLUETOOTH Button
11. LED LIGHT Button
12. ARROW Buttons
13. SOURCE Button
14. NUMBER Buttons
15. TWS Button
16. VOLUME Knob
LED Display
17. SSD Display
18. AM Indicator
19. FM Indicator
20. STANDBY Indicator
21. NOAA ALERT Indicator
22. BLUETOOTH Indicator
23. TWS Indicator
24. APP Indicator
Side Panel
25. BATTERY Indicator Button
26. BATTERY Level
Indicator LEDs
27. BATTERY LOW
Indicator LED
28. AC OUTLET Port
(Pass Through)
29. INPUT POWER Port
30. POWER ON/OFF Switch
1 2 3 45
PRODUCT CONTROLS
6
7 8 9 10 11 12 13 15 1614
25
28
29
27
26
30
17 18 19
20 21 22 23 24

2
IMPORTANT: Before first use, charge for ~6 hours.
•Flip the switch UP to turn ON
the speaker.
(“HI” will appear on the LED
display. The speaker will connect
to the last selected source.)
•Flip the switch DOWN to
turn OFF the speaker.
Battery Level Indicator
•Press the button above the
LED indicators to check the
current battery level .
•Green LEDs indicates a full
to low battery.
•Flashing RED LED indicates
the battery is very low and
needs to be charged.
The indicator is only active while the speaker is on.
– Indicator shows current battery level each time
the speaker is turned ON.
AC Pass Through Outlet
•Connect the AC OUTLET
port to an external device
to power that device
through the speaker.
The speaker must be connected to a power
source in order to use AC pass through.
(See Power/Charging Speaker.)
POWER & BATTERY
Full Charge – achieved in 7 hours while powered OFF
– achieved in 15 hours while powered ON.
Power/Charging
•Connect the INPUT
POWER port to an external
power source using the
included power cord.
DO NOT use the speaker’s AC Outlet port
– it will not charge or power the speaker.
USB Power Banks
USB
•Connect up to two devices
to the speaker via the
5V/2.1A USB ports to charge
those devices from the
speaker’s internal battery.
(USB cable not included.)
USB ports are for charging ONLY
– they will not make audio connections.

(Press)
(Press)
3 ft.
“Bluetooth”
“Bluetooth”
“Pairing”
“Pairing”
Bluetooth Pairing NFC Pairing (Android Devices)
3
“Connected”
1Enable NFC on the music
device you wish to pair.
2Press the BLUETOOTH
button to set the speaker to
Bluetooth mode.
“Connected”
MONSTER RR4
AUDIO
1 Place your mobile device
within 3 feet of the speaker.
Make sure Bluetooth is enabled
on your mobile device.
2Press the BLUETOOTH
button to set the speaker to
Bluetooth mode.
~30 feet max connection range after paired.
Moving devices outside this range may cause
disruption or signal loss.
~30 feet max connection range after paired.
Moving devices outside this range may cause
disruption or signal loss.
The speaker will automatically enter pairing mode.
The speaker will make audible
and visual LED confirmation.
Bluetooth icon will flash in
pairing mode.
3 Select “MONSTER RR4” on
your mobile device to pair
with the speaker.
The speaker will make audible
confirmation and the Bluetooth
Icon will stop flashing.
If the Bluetooth icon is NOT flashing, press and hold the BLUETOOTH button
to manually enter pairing mode.
The speaker will automatically enter pairing mode.
The speaker will make audible
and visual LED confirmation.
Bluetooth icon will flash in
pairing mode.
If the Bluetooth icon is NOT flashing, press and hold the BLUETOOTH button
to manually enter pairing mode.
3Place your music device
directly on the speaker’s
NFC logo until paired.
The speaker will make audible
confirmation and the Bluetooth
Icon will stop flashing

2
1
10 ft.
TWS
TWS
(Press)
(Press)
“Connected”
True Wireless System (TWS)
Wirelessly connect two Rockin’ Roller 4 speakers together.
1Place two Rockin’ Roller 4
speakers within 10 feet of
each other.
2Connect your music device
to one of the speakers via
BLUETOOTH.
Leave the second speaker in
BLUETOOTH mode without
connecting to a device.
3Press the TWS pairing
button on both speakers to
activate TWS pairing. The
speakers will automatically
connect with each other.
Speaker will make audible
confirmation. TWS icons will be
displayed on both speakers LED
displays when connected.
To disconnect a speaker,
press the TWS button.
12
4
“AUX IN”
AUX
IN
AUX-IN (3.5mm)
•Connect a music device
to the AUX IN port with a
standard 3.5 mm jack. The
speaker will automatically
change to AUX mode.
Speaker will make audible and
visual LED display confirmation.
“Connected”
~30 feet max connection range after paired.
Moving devices outside this range may cause
disruption or signal loss.
or MIC
MIC
GUITAR
•Connect an instrument,
microphone, or other device
to the MIC/GUITAR or MIC
port(s) with a standard ¼
inch jack.
•Turn GAIN and ECHO
control knobs clockwise
to increase their eect,
and counter-clockwise to
decrease their eect.
The device(s) will automatically transmit audio playback
through the speaker in the current mode.
Each ¼ inch port has its own GAIN and ECHO knobs
that can be adjusted independently.
¼” Guitar/Mic Inputs & Gain/Echo Controls
Devices plugged into the ¼ inch ports will
transmit audio playback in all modes/sources.
(-) (+)
G
E

5
(Press) or
(Press)
“NOAA”
SOURCE
NOAA Weather Radio (NWR)
Access a network of nationwide radio stations
that broadcast local weather information.
1Press the SOURCE button
to change the speaker to
NWR mode.
Speaker will make audible and
visual LED display confirmation.
2Press the ARROW buttons to
change stations.
Raise the antenna to a vertical position
for improved reception. Stations and signal
strength vary depending on location.
•Press the VOLUME knob
once to turn NWR alerts
o (NOFF). Press again to
turn NWR alerts back on
(N ON). Works in any audio
source mode.
(Press)
(Press)
(Press)
or
(Press or Hold)
“Radio” “Radio”
or
SOURCE
AM/FM Radio
1Press the SOURCE button
to change the speaker to
AM or FM RADIO.
Speaker will make audible and
visual LED display confirmations.
2Press the ARROW buttons
to change radio frequency.
Press and hold the ARROW
buttons to scan for a station.
•Press a NUMBER BUTTON
(1-5) to change the
speaker’s equalizer settings.
Setting will show on the
speaker’s LED display.
Equalizer Presets (Bluetooth/AUX-IN ONLY)
BUTTON SETTING LED
1FLAT E-1
2JAZZ E-2
3ROCK E-3
4POP E-4
5CLASSIC E-5
BASS
TREBLE
BASS
TREBLE
•Press the BASS/TREBLE
button ONCE to enter bass
level mode.
•Press the BASS/TREBLE
button TWICE to enter
treble level mode.
•Turn the VOLUME knob
clockwise to increase
or counter-clockwise to
decrease the bass/treble
levels (-06 to 06).
Bass/Treble Adjustment
(Press x2)
(Press x1)
(-) (+)
Pressing the BASS/TREBLE button a third
time will revert to the audio source mode.
The menu will revert to the audio source mode
after ~5 seconds of being idle.

6
FEATURES
(Press & Hold
~3 seconds)
(Turn)
Standby Mode
Telescoping Handle
•Press and hold the
VOLUME knob for ~3
seconds to put the speaker
in standby mode.
LED indicators will shut o.
Power icon will turn on.
•Press any button or turn the
VOLUME knob to wake the
speaker up from standby.
•Pull the telescoping carry
handle UP and away from
the speaker to extend it.
•Press the BUTTON on
the grip area to adjust
the carry handle to a
comfortable length.
The speaker will automatically enter standby
mode after ~15 minutes of inactivity or lack
of connection. Standby mode can be manually
enabled in any mode.
DO NOT use the carry handle when speakers
are stacked. The handle is graded to only carry the
weight of one Rockin’ Roller 4 speaker.
(Hold)
/ /
1
Saving Radio Stations (AM/FM/NOAA)
•Save the current radio
station by pressing and
holding one of the NUMBER
BUTTONS (1-5).
The LED display will confirm the
saves station (P-1, P-2, etc.)
Press the NUMBER KEY
while in radio mode to
go to the corresponding
SAVED station.
(Press) 1
LINE
OUT
(External Line-In)
•Connect a second speaker
to the Rockin’ Roller 4 via
the LINE OUT port with
a standard 3.5 mm jack.
Audio playback will transmit
through the Rockin’ Roller
4 and the second speaker
simultaneously.
LINE-OUT (3.5mm)

Stack two Rockin’ Roller 4 speakers on top of each other.
7
Stacking System
1Place the FIRST Rockin’
Roller 4 on a stable, non-
slippery surface.
2Lift the SECOND Rockin’
Roller 4 on top of the first
speaker and slide the
“hooked” feet in first.
3Pull the latch UP
to release the locking
mechanism on the
bottom speaker.
5Swing the locking arm UP
and into the top speaker’s
mounting hook.
6Push the latch DOWN until
it locks securely into place.
Some assembly required. Make sure the upper
and lower locking brackets are installed with all 8
screws tightly in place.
(Press) (x1) (x2) (x3) (x4)
(Hold)
C-8 C-3C-1
C-6
C-2
C-5
C-4 C-7
25%50%75%100%
LED Lights
•To turn on the LED lights,
press the LIGHT button. Press
up to four times to increase
the brightness level (25%,
50%, 75%, 100%). Press
again to turn o the LED lights.
•To change the LED light color,
press and hold the LIGHT
button to activate color
selection (C-1,C-2, etc.). Turn
the VOLUME knob to change
the color mode.
C-8= White C-1= Rainbow
C-2= Red C-3= Blue
C-4= Green C-5= Purple
C-6= Yellow C-7= Turquoise
Color selection display will revert to source
display after ~2 seconds of being idle.
LED lights revert to white color and o when the
speaker is turned o or enters standby mode.