Betso BOWTIE User manual

User manual
BETSO BOWTIE
Wideband omnidirectional antenna designed for use on a sound bag
1© Copyright BETSO ELECTRONICS Ltd.

User manual
BETSO BOWTIE
Contents
1. Recommended accessories......................................................................................3
2. Safety instructions.................................................................................................3
3. Technical specifications..........................................................................................3
4. EC Declaration of conformity..................................................................................4
Used symbols
Indicates text that has only in ormative character. I you overlook this
in ormation, it can't result in product damage by it's mishandling.
Indicates text that has important instruction character. I you overlook this
in ormation, it may result in product damage not covered by warranty.
© Copyright BETSO ELECTRONICS Ltd. 2

User manual
BETSO BOWTIE
Thank you that you have purchased the product BETSO!
Please pay su icient attention to the ollowing user manual o your new product
BETSO. Following these instructions, you will avoid the possible damages o your new
device and at the same time, they will be presented to you all the available eatures that
allow you to take advantage o the potential o the product.
For the latest in ormations about our products BETSO please contact your local
distributor or visit our website http://www.betso.eu.
1. Recommended accessories
For the latest in ormations about our products BETSO please contact your local
distributor or visit our website http://www.betso.eu.
2. Safety instructions
To clean the device, use a dampened piece o cloth. Never use any chemical
solvents!
3. Tec nical specifications
Antenna type Passive
Frequency range 470 MHz to 700 MHz
Inbuilt ilter low pass 700 MHz
Antenna structure gain 1.8 dBi (@ 600 MHz)
Antenna directivity as a dipole
Antenna polarization Linear
Antenna VSWR Excellent < 1.2 (@ 600 MHz)
Mechanic construction CNC milled, anodized aluminium alloy and glass-
rein orced epoxy laminate
Mounting 1/4" thread
Dimensions (h x w x d) 170 x 111 x 14 mm (6.7" x 4.4" x 0.55")
Weight approx. 76 g (0.2 lb.) without holder and cable
3© Copyright BETSO ELECTRONICS Ltd.

User manual
BETSO BOWTIE
4. EC Declaration of conformity
BETSO ELECTRONICS s.r.o.
Ke Drackam 1603, 156 00 Praha 5 - Zbraslav, Czech Republic
Reg. Number: 28955706
declares that this device
BETSO BOWTIE
speci ication: Wideband omnidirectional antenna designed or use on the sound bag
requency range: 470 – 700 MHz
con orms to the essential requirements o the ollowing applicable European Directives and their
associated norms:
Directive 2001/95/EC (General Product Safety)
EMC Directive: 2014/30/EU
RoHS: 2011/65/EU
Con ormity assessed via Annex III. using a Technical Construction and Results o measurements.
January 2020
Ing. Jan Zastera
general manager
E-mail: [email protected]
© Copyright BETSO ELECTRONICS Ltd. 4