Beyerdynamic DT 900 PRO X User manual

For more information download the manual at:
www.beyerdynamic.com/pro-x
beyerdynamic GmbH & Co. KG
Theresienraße 8 • 74072 Heilbronn / Germany
Tel. [phone] •[e-mail]
PRO X Inructions (08.21) • 695319 • Printed in Germany • Subject to change without notice

The lockable connecting cable is
fitted with a 3-pin mini XLR cable
connector to the headphones. For
correct assembly, the small release
button of the cable mu face to
the outter site of the headphones.
When connecting the cable, make
sure that the cable connector locks
in place of the ear cup.
To pull of the headband pad,
please carefully pull on the
silicon rap until all hooks
of the headband pad are
released from the headband.
HOW TO
CONNECT
THE CABLE
HOW TO
CHANGE
THE HEAD
BAND PAD
ACCESSORIES AND SPARE PARTS
Accessories and replacement
equipment can be found at:
www.beyerdynamic.com/pro-x
SUPPLIED
ACCESSORIES
1 x raight cable, 3 m
1 x raight cable, 1.8 m
1 x drawring bag
To pull of the earpad please
carefully pull apa the gap
between housing and ear
pads using your fingeips
or a narrow blunt object.
HOW TO
CHANGE
THE EAR
PADS
When you want to
change the cable,
please press the small
button for release and
simultaneously pull o
the cable connector
from the headphones.
To put on the earpad
please make sure that
the snap-in nose of
the ear pad sits in the
right place. Then
press gently with the
palm of your hand
again the ear pads until
the ring snaps into place.
To put on the head-
band pad please
make sure that the
snap-in nose on the
right side sits in the
right place. Then press
gently the pad into the
headband until the
hooks snap into place.
THANK YOU FOR
CHOOSING THE PRO X
STUDIO HEADPHONES.
Please take some time to read
carefully through this document.
If you have technical problems
while using the headphones or
need fuher guidance, please
visit our FAQ website at
suppo.beyerdynamic.com
ENJOY THE SOUND!
Your beyerdynamic
PRO X Team