Biamp Vocia VA-8150CV User manual

VA-8150CV and VA-4300CV
OPERATION MANUAL
585.0406.90B
APRIL 2016

VA-8150CV / VA-4300CV Product Description
The VA-4300CV is a digital networked four channel constant voltage 70V/100V amplifier. It is CobraNet
enabled and capable of delivering audio power at 300 Watts per channel. The VA-4300CV also has dual
Ethernet ports for redundant CobraNet connectivity, comprehensive failover capabilities, and dual power
inputs. The VA-4300CV also has comprehensive failover capability with device-to-device and channel-to-
channel failover.
The VA-8150CV is a digital networked eight channel constant voltage 70V/100V amplifier. It is CobraNet
enabled and capable of delivering audio power at 150 Watts per channel. The VA-8150CV also has dual
Ethernet ports for redundant CobraNet connectivity, comprehensive failover capabilities, and dual power
inputs. The VA-8150CV also has comprehensive failover capability with device-to-device and channel-to-
channel failover.
Vocia VA-8150CV —это восьмиканальный цифровой сетевой усилитель, работающий с линиями
постоянного напряжения 70 и 100 Вольт.
Vocia VA-4300CV—это четырехканальный цифровой сетевой усилитель, работающий с линиями
постоянного напряжения 70 и 100 Вольт

VA-8150CV / VA-4300CV Setup and Installation
Setup and Use
The Vocia software provides an intuitive interface for configuration of the VA-8150CV and VA-4300CV
Amplifiers. The information supplied by this manual relates to physical connections and assignment. For
more details on software setup, please consult the Vocia Help File.
Installation
The unit requires one 3.5 inch (88.9mm) high and 19 inch (483mm) wide rack space with 17.5 inch
(444mm) depth. Mounting the unit using four screws with washers will prevent marring of the front panel.
PVC or nylon washers are appropriate.
Install the unit away from heat sources, such as vents and radiators, and in rooms with adequate
ventilation. Ensure that air can circulate freely behind, beside, and above the unit. Do not exceed the
maximum ambient operating temperature of 18°-108° F (-8° - 42°C). Be aware of conditions in an
enclosed rack that may cause the temperature to exceed ambient room conditions.

VA-8150CV / VA-4300CV Front
System Indicators
The LED indicators on the front panel of the amplifier provide information and operational status of the
amplifier and its associated output channels. LED layout and features vary between amplifier models.
LED’s are grouped to show chassis status indication and amplifier channel status indication. Please see
the Front Panel View section for details on the different configurations between the various amplifier
models.
Amplifier Chassis Indicators
These indicators relate to the entire amplifier unit (chassis).
AC Power
AC power is a green LED indicator. This will illuminate when a Mains supply is applied to the unit.
DC Power
DC Power is a green LED indicator. This illuminates when an auxiliary DC supply is applied to the unit via
either or both Auxiliary power inputs.
CAUTION
Refer to the caution in the Rear Panel Auxiliary Power section
Amp Fault
An amber LED illuminates when a chassis fault has occurred.
Flashing Amber LED - Warning -the amplifier chassis is not operating within normal limits. If the
condition causing the Warning is not corrected, chassis failure may occur.
Solid Amber LED - Fault - the amplifier chassis has failed - audio may have stopped.
Activity
Activity indicates the configuration status of the Amplifier.
LED off - the unit is not active.
Green LED - the unit is configured.
Flashing Amber LED - the unit is active but has no configuration.
Amber LED - the unit is configured as a redundant device in a failover configuration.
Red LED - indicates a configuration load failure.
Status
Status indicates the health of the amplifier hardware.
Green LED - indicates that the unit powered up normally.
Amber Flashing LED - shown briefly during the power-up self-test.
Red LED - the unit experienced a problem during the power-up self-test.

Amp Channel Indicators
These indicators relate to each amplifier channel.
Activity
The Activity LED will illuminate when the channel is configured.
Green LED - configured and actively passing audio.
Amber LED - channel is acting as a standby channel for failover applications.
Amber flashing LED - the amplifier channel has failed or there is a speaker line fault and audio
may have stopped.
Signal
The Signal LED will illuminate when the amplifier output channel is configured and passing audio.
Green LED - passing audio within operational limits. Audio levels between -36 dBFS and -6 dBFS.
Amber LED - Passing audio levels between -6 dBFS and -2 dBFS.
Red LED - indicated clipping. Levels above -2 dBFS.

VA-8150CV / VA-4300CV Rear
2
1
3 4 5 6
7
Conventions
All numbered audio, relay and power connectors on the rear panel of the amplifier are configured with the
lowest output or input on the right of the chassis as viewed from the rear of the unit.
AC Power Socket
Provides for connection of the appropriate power cord. Each amplifier uses a switch mode power supply
that has an operating voltage range of 100-240V at 50/60 Hz.
CAUTION
Do not remove or defeat the ground prong on the power cord, as this will constitute a shock hazard. Equipment should be
connected to a mains socket outlet with a protective earthing connection. This plug is the main disconnecting device and should
remain readily operable. There are no user interchangeable parts. Please contact Biamp Technical Support or your local distributor
for all service requirements.
Auxiliary Power
The VA-8150CV and VA-4300CV support 48V DC Auxiliary power connections.
This Connection allows dual DC power inputs to be used. Dual DC supply capability allows the amplifier
to meet standards that call for redundant power supplies. If an amplifier is required to operate without a
DC supply, the Auxiliary supply fault monitoring must be disabled in Vocia software. A loss of supply fault
is indicated via the Vocia software and by a blinking amber ‘Amp Fault’ indicator on the front panel of the
affected device. The power supplies used for the amplifier must meet the voltage range and current
requirements detailed in the specifications table. Local standards, norms or codes may require the use of
certified power supplies and may require observance of minimum ‘on battery’ running times both for
standby and maximum power conditions.
NOTE
Dual redundant Auxiliary power supplies must each independently meet the total power requirements of the amplifier
The pluggable terminal blocks provided will accommodate a wire gauge size of 8 AWG
maximum. External over-current protection must be provided, according to the current carrying capacity
of the connecting wires, and in no case greater than 30 Amps. Do not ground or connect to Chassis either
the positive or negative Auxiliary Power connections. The Auxiliary power must be floating with respect to
ground.
CAUTION
Due to potential energy hazard, connections to the Auxiliary Power DC inputs must be made by a qualified electrician or other
qualified person as required to conform with all local codes.

Network Connections
The amplifier is a CobraNet device. A Primary and Secondary CobraNet connection is provided for this.
All CobraNet routing and bundle assignments are processed by the Vocia devices locally. Vocia makes
dynamic use of available bundles in CobraNet. A 100Base-T Ethernet switch (not repeater hub) is
required when networking multiple units. CobraNet utilizes standard CAT5, CAT5e, CAT6, or CAT7
cabling, which has a specified maximum length of 328 feet (100 meters). Additional Ethernet switches, or
switches which provide fiber-optic interface, can be used to extend the physical distance between units
within a network. Please note that CobraNet limits network extensions to seven hops (one-way
transmissions) within a network. The CobraNet network connection is configured with the primary
connector on the left and the secondary (redundant) connector on the right. The primary and secondary
CobraNet ports are provided to facilitate connection redundancy. Each connector provides two LEDs that
indicate Ethernet link and network activity.
Left LED
Right LED
Description
None
None
No Data Connectivity or CobraNet activity
None
Green
Link established
Flashing yellow
Green
Link established and CobraNet activity detected; The unit is acting as a CobraNet Performer
Flashing yellow
Flashing green
Link established and CobraNet activity detected; The unit is acting as a CobraNet Conductor
Flashing yellow
None
CobraNet fault. Check cabling and configuration for errors
Device ID Switches
The VA-8150CV and VA-4300CV units represent separate Vocia device types.
The rotary ID switches give the unit a unique Device ID. The switches are in hexadecimal format. All units
of the same device type must have a unique Device ID to function properly within a Vocia Paging World.
The Factory Default Device ID is 01. A Device ID of 00 is invalid and cannot be used.
To assign a Device ID of hex 07, leave the MSB switch on 0 and turn the LSB switch to 7. Device ID
switches should be set using a 0.1 inch (2.5mm) to 0.12 inch (3.0mm) flat blade screwdriver.
NOTE
Changes made to the Device ID while connected to the network require a power cycle of the device in order to take effect.
Device-to-Device Failover
All amplifiers support Device-to-Device amplifier chassis failover in case of fault. The redundant amplifier
must be the same model as the primary amplifier. A Failover Link Cable must be connected between the
primary and the redundant amplifier as shown below. Connect ground to ground and Pin 1 of the primary
amplifier to Pin 2 of the redundant amplifier; connect Pin 2 of the primary amplifier to Pin 1 of the
redundant amplifier
Page Active Relay
Via the Page Active Relay connectors, one Form A (single pole, changeover) relay is presented per
channel on the VA-8150CV. Similarly, two such relays per channel are presented for the VA-4300CV
(relays operate in tandem) Each PAR connector is an eight way 3.5mm pluggable screw terminal block.
The Page Active relay connections are labeled as follows:
C –Relay Common.
NO –Normally Open.

Amplifier Output Connections
Speaker Connection
To minimize power loss, use a speaker cable of appropriate gauge for the load impedance. For long
speaker cables, to minimize high frequency loss, choose a low capacitance cable. Use the supplied plug-
in barrier strip connectors to connect loudspeaker level outputs. If stranded speaker wire is used, be sure
to incorporate all strands into the connector, as stray strands can short to the adjacent terminal or
chassis. Do not leave excessive bare wire outside the terminals, as this can lead to shorts. Use of the
supplied cable restraints is required to secure the cable in the connector. To facilitate parallel wiring, each
connector allows for the connection of two loads to each amplifier channel.
Rated Load Table
The total output load connected to any channel must not be less than the rated impedance load for that
channel, as detailed below. Operating the amplifier in excessive overload may cause power supply safety
limiting.
70V Setting
100V Setting
VA-4300CV
16Ω
33 Ω
VA-8150CV
33 Ω
66.7Ω
CAUTION
All Speaker wiring connections should be made by qualified personnel and with the amplifier power removed. The 100V output
requires Class 3 wiring. Please refer to a qualified electrician or other qualified person according to local codes.

VA-8150CV / VA-4300CV Fault Detection
Output Fault Detection
Vocia amplifiers employ multiple out-of-band (inaudible), high frequency tones for fault detection. To
prevent the possibility of interference with these tones, recorded audio messages or audio content with
continuous or swept tonal components (e.g. alert tones) should be band limited at 15 kHz during
recording. In addition, signal levels should be adjusted to minimize clipping as severely clipped signals
may also affect these out-of-band fault detection tones.
Failover Modes
The Vocia Amplifiers support a Device-to Device, Channel-to-Channel and 3-to-1 / 7-to-1* failover mode.
Only one type of failover mode can be implemented per amplifier.
Failover is triggered by one of the following conditions:
Chassis fault on primary amplifier
Channel fault on primary amplifier
Loss of power to the primary amplifier
Loss of CobraNet link to primary amplifier
Loss of Failover Link connection
ELD-1 / PLD-2 speaker line fault if enabled in software
Only faults (Chassis and Channel) trigger the failover mechanism. Abnormal conditions that do not
immediately impair audio appear as warnings, but do not trigger failover.
The redundant amplifier may be wired in parallel to the existing speaker line or it can be connected to a
redundant speaker line. Relays isolate the output terminals on the secondary amplifier unit. Relays are
normally open. When a configuration is received, relays close on the primary unit and remain open on the
redundant unit. On failover, the relay states are reversed.
*7-to-1 failover on VA-8150CV only
Device-to-Device Failover wiring with Parallel Speaker wiring
After replacing the faulty amplifier, a power cycle is required to recover from failover. This can be done
either by physically repowering the amplifiers or by performing a ‘device reset’ in the Vocia software via
the amplifier test tab. The amplifiers are required to be reset within 10 seconds of each other in order for
the primary device to resume control.

Channel-to-Channel Failover
All amplifiers support Channel-to-Channel failover. This is configured in the Vocia Software in the
amplifiers General Setting as 1:1 Failover. In this configuration, channel pairs can be specified and
adjacent channels will act as a redundant backup.
Channel failover is triggered by one of the following conditions:
Over temperature
Short Circuit fault
Channel Failure fault
ELD-1 / PLD-2 speaker line fault if enabled in software
The primary amplifier channel will resume control after the fault condition is cleared and the unit is re-
powered.
-
+- +
1
-
+- +
2
Amplifier Output connections
-
+- +
1
-
+- +
2
Amplifier Output connections
A B
Failover
Channel
Primary
Channel
-
+- +
1
-
+- +
2
Amplifier Output connections
Failover
Channel
Speaker Speaker Redundant Speakers
Failover
Channel
3:1 and 7:1 Failover
The VA-4300CV amplifier supports 3:1 channel redundancy. This is configured in the Vocia Software in
the amplifiers general setting as 3:1 failover. In this configuration channel 4 will act as a redundant
backup for channel 1, 2 or 3.
The VA-8150CV amplifier supports 2 x 3:1 or 7:1 channel redundancy. This is configured in the Vocia
Software in the amplifiers general setting. In 2 x 3:1 configuration, channel 4 will act as a redundant
backup for channel 1, 2 or 3 and channel 8 will act as a redundant backup for channels 5, 6 and 7. In 7:1
configuration channel 8 acts as a redundant backup for channels 1 to 7. The first channel to fail will take
priority on the redundant channel.
The primary amplifier channel will resume control after the fault condition is cleared and the unit is re-
powered.
-
+- +
1
-
+- +
2
Amplifier Output connections
A
B
-
+- +
3
-
+- +
4
C
Redundant
Channel –
No Connection

VA-8150CV / VA-4300CV Current Draw
AC current draw for 240V operation
TOTAL OUTPUT POWER
(Watts)
CONFIGURED
CHANNELS
IDLE
(Amps)
1/8 POWER
PINK NOISE
(Amps)
1/3 POWER
PINK NOISE
(Amps)
FULL POWER
SINE WAVE
(Amps)
VA-8150CV
0 (Not configured)
0
0.3
NA
NA
NA
150
1
0.3
0.4
0.6
1.1*
300
2
0.4
0.5
0.9
1.9*
450
3
0.4
0.7
1.2
2.7*
600
4
0.5
0.8
1.5
3.6*
750
5
0.5
1
1.8*
4.6*
900
6
0.6
1.2
2.1*
5.5*
1050
7
0.6
1.3
2.4*
6.4*
1200
8
0.7
1.5
2.7*
7.4*
VA-4300CV
0 (Not configured)
0
0.2
NA
NA
NA
300
1
0.3
0.5
1
1.8*
600
2
0.4
0.8
1.6
3.6*
900
3
0.5
1.1
2.3*
5.5*
1200
4
0.6
1.3
3.1*
7.4*
* Burst mode only. Protective thermal limiting will reduce long-term AC current and continuous power output.
AC current draw for 100V operation
TOTAL OUTPUT POWER
(Watts)
CONFIGURED
CHANNELS
IDLE
(Amps)
1/8 POWER
PINK NOISE
(Amps)
1/3 POWER
PINK NOISE
(Amps)
FULL POWER
SINE WAVE
(Amps)
VA-8150CV
0 (Not configured)
0
0.5
NA
NA
NA
150
1
0.7
0.9
1.5
2.5*
300
2
0.8
1.3
2.2
4.6*
450
3
0.9
1.7
3
6.8*
600
4
1.1
2.1
3.8
8.9*
750
5
1.2
2.5
4.6*
11.1*
900
6
1.4
2.9
5.4*
13.2*
1050
7
1.5
3.3
6.2*
15.4*
1200
8
1.7
3.7
7*
17.8*
VA-4300CV
0 (Not configured)
0
0.4
NA
NA
NA
300
1
0.7
1.2
2
4.6*
600
2
0.9
1.9
3.7
9*
900
3
1.1
2.6
5.4*
13.6*
1200
4
1.4
3.3
7.1*
17.3*
* Burst mode only. Protective thermal limiting will reduce long-term AC current and continuous power output.

VA-8150CV / VA-4300CV Current Draw
DC current draw for 48V operation
TOTAL OUTPUT POWER
(Watts)
CONFIGURED
CHANNELS
IDLE
(Amps)
1/8 POWER
PINK NOISE
(Amps)
1/3 POWER
PINK NOISE
(Amps)
FULL POWER
SINE WAVE
(Amps)
VA-8150CV
0 (Not configured)
0
0.6
NA
NA
NA
150
1
0.9
1.3
2
4.4*
300
2
1.1
2
3.7
8.2*
450
3
1.4
2.7
5.4
12.2*
600
4
1.7
3.5
7.2
16.2*
750
5
1.9
4.3
8.8*
20.1*
900
6
2.2
5.1
10.5*
24.1*
1050
7
2.5
5.9
12.3*
28.1*
1200
8
2.7
6.7
13.9*
32.2*
VA-4300CV
0 (Not configured)
0
0.4
NA
NA
NA
300
1
0.9
1.8
3.2
8*
600
2
1.3
3.2
6.5
15.9*
900
3
1.7
4.6
9.9*
23.8*
1200
4
2.1
6.1
13.1*
31.8*
* Burst mode only. Protective thermal limiting will reduce long-term DC current and continuous power output.

VA-8150CV / VA-4300CV Specifications
Specification Table
Connection:
Dual RJ45 with shielded Ethernet
cable (CAT5, 5e, 6 or 7)
Dimensions:
Height:
3.5 Inches (88.9mm)
Width:
19 Inches (483mm)
Depth:
17.5 Inches (444mm)
VA-8150CV Weight:
24 lbs (10.9 kg)
VA-4300CV Weight:
22.3 lbs (10.1 kg)
Environment:
Ambient Operating Temperature
18-108°F
(-8-42°C)
Humidity
0 - 95%
Altitude
0 - 10000 Feet MSL
(0 - 3000 Meters MSL)
Compliance:
UL Listed- USA and Canada E305194
FCC Part 15 Subpart B class A
CE Marked
RoHS Compliant
RCM Marked
VA-8150CV Audio Specification
Channels:
8 - fixed
Watts per channel:
150W
Intermodulation distortion:
(SMPTE at continuous power)
<0.35% at 100V
<0.40% at 70V
VA-4300CV Audio Specification
Channels:
4 - fixed
Watts per channel:
300W
Intermodulation distortion:
(SMPTE at continuous power)
<0.35% at 100V
<0.65% at 70V
Common Audio Specification
Frequency Response (20Hz to 20kHz):
+0,-1dB,
THD+N (20Hz to 10kHz):
<0.3%
Signal-to-Noise Ratio:
(20Hz to 10kHz, unweighted at rated power):
>100dB
Inter Channel Isolation:
(20Hz to 20kHz at rated power):
>80dB
Amplifier Topology
Output type (Constant Voltage only):
70V / 100V
Class:
D
VA-8150CV and VA-4300CV Power
AC
100V-240V, 50H 60 Hz
3.6A - 1.5A
DC:
Dual 48V
6.7A
Speaker Line Monitoring
Passive end of Line monitoring (PLD-2)
Active end of Line monitoring (ELD-1)
Impedance monitoring
Pilot tone generation
Extended Audio Delay
Up to 32 Seconds (10km / 32,000ft)

VA-8150CV / VA-4300CV Specifications
Block Diagram

Notes Page

Notes Page

IMPORTANT SAFETY INSTRUCTIONS
Lightning Bolt: Hazardous Live voltages present when this unit is in operation. Do not touch terminals marked with
this symbol while the unit is connected to live power.

do so will compromise safe operation of this unit

WARNING

WARNING – 100 Volt Speaker terminals marked with the symbol are Hazardous Live. External wiring connected to these terminals

WARNING
provide a protective earthing connection.
Disconnect Device
CAUTION

Intended for Installation and Service by Skilled Personnel Only:
CAUTION



CAUTION
• 
• 
Wall Mounting Instructions – Wall mounted products must be securely fastened to drywall or similar surface using a minimum of 4 wood

sheet metal screws located in metal studs or wood screws extending a minimum of ½ inch into wood studs.
Explanation of Graphical Symbols:
1) Read these instructions.



5) Do not use this product near water.





produce heat.
9) Do not defeat the safety purpose of the grounding-type plug.
A grounding type plug has two blades and a third grounding
prong.


replacement of the obsolete outlet.


where they exit from the product.

manufacturer.



building structure.

the cart and product combination to avoid injury from tip-over.

unused for long periods of time.





has been dropped.

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

símbolo mientras la unidad se encuentre conectada a una salida activa de energía.


Aspas de ventilador en movimiento peligrosas Desenchufe el producto antes de realizar reparaciones y aléjelo de las
aspas en movimiento de los ventiladores.

1) Lea estas instrucciones.


4) Siga todas las instrucciones.



según las instrucciones del fabricante.





tercera punta con conexión a tierra.
La tercera punta se provee para su seguridad. Si el enchufe

electricista para reemplazar la toma obsoleta.


convenientes y el punto donde salen del producto.

fabricante.

base o 



la combinación del carro con el producto para evitar
lesiones en caso de una caída.

va a utilizarlo por largos períodos de tiempo.
14) Todas las reparaciones deben ser realizadas por personal





ha caído.
ADVERTENCIA 

ADVERTENCIA  están activas y son peligrosas.

ADVERTENCIA
funcionen correctamente para brindar una conexión a tierra de protección.
Desconexión del dispositivo – El enchufe de alimentación eléctrica se utiliza para desconectar esta alimentación y deberá poder accionarse
fácilmente.
PRECAUCIÓN

para las conexiones de los circuitos de telecomunicaciones.

PRECAUCIÓN



PRECAUCIÓN
códigos locales.
• 
• 
Instrucciones para el montaje sobre la pared




CONSIGNES DE SÉCURITÉ IMPORTANTES





en mouvement.

1) Lisez attentivement les présentes instructions.


4) Respectez toutes les consignes données.








la terre. Le connecteur est reconnaissable par ses deux broches








fabricant.

ou chariots capables de supporter le poids du produit et



avec précaution pour éviter de le renverser.








AVERTISSEMENT 

AVERTISSEMENT – Les bornes des haut-parleurs 100 V comportent le pictogramme signalant une tension dangereuse. Toute connexion

AVERTISSEMENT

Débranchement de l’appareil

MISE EN GARDE

).
Installation et interventions réservées au personnel compétent:
MISE EN GARDE




MISE EN GARDE

• 
• 
Consignes pour le montage mural




WICHTIGE SICHERHEITSHINWEISE


Ausrufezeichen: Ersetzen Sie Bauteile (z. B. Sicherungen) nur entsprechend den vom Hersteller angegebenen


fernhalten.

1) Lesen Sie diese Hinweise.


4) Befolgen Sie die Hinweise.







9) Sicherheitsfunktion des geerdeten Steckers nicht umgehen.
Ein geerdeter Stecker hat zwei Stromkontakte und einen dritten
Erdungskontakt.


einem Elektriker austauschen.



















ACHTUNG 


ACHTUNG – 100-Volt-Lautsprecherklemmen mit dem Symbol 
nur von geschulten oder beaufsichtigten Personen vorgenommen werden.
ACHTUNG

Trennen des Geräts
VORSICHT

Brandrisiko zu reduzieren.
Ausschließlich für Einbau und Wartung durch geschultes Personal vorgesehen:
VORSICHT



VORSICHT

• 
• 
Anweisungen zur Wandmontage


