Biamp BPAK User manual

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA
W: www.biamp.com
BPAK (Backpack Clip Kit)
Installation Guide
PRODUCT DESCRIPTION
The BPAK Backpack Clip Kit allows a Tesira AMP-450BP, AMP-450P, TCM-X
or TCM-XA to be attached to the top of a Desono C-IC6 back can.
C-IC6 with Tesira unit
secured with backpack
clips and conduit cover
Tesira Unit
(Amp-450BP shown)
CI-C6
585.0111 24JUL2020
Clips and M3 screws
(2 each)
Cover
(for conduit usage)
Kit Contents

page 2
INSTALLATION
3. A cover is provided for conduit usage. Punch out and feed wiring
through the opening, and connect per the device instructions. Insert
tabs into the slots on the Tesira unit and tighten the thumb screw to
secure the cover to the C-IC6 enclosure.
1. Attach clips
2. Fully slide unit into clips
M3 Flat Head Screw
Backpack Clip
Use this hole for seismic
wire attachment or to
further prevent movement
on the back can