Big Backyard Kingswood Play System F23310 User manual

INSTALLATION AND OPERATING INSTRUCTIONS
kingswood PLAY sYsTEM – F23310
10 - 14 Hrs
To reduce the risk of serious injury or death, you must read and
follow these instructions. Keep and refer to these instructions
often and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 29’3” x 28’ (8.9 x 8.5 m) area requires Protective Surfacing. See page 3.
MAXIMUM VERTICAL FALL HEIGHT - 7’6” ft. (2.3 m)
CAPACITY - 10 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries,
day cares or parks
Rev 2/2/2011
3403310
Two person
assembly
Table of Contents
Warnings and Safe Play Instructions . . . . . . . . . . pg. 2
Protective Surfacing Guidelines . . . . . . . . . . . . . . pg. 3
Instructions for Proper Maintenance . . . . . . . . . . pg. 4
About Our Wood – Limited Warranty . . . . . . . . . . pg. 5
Keys to Assembly Success . . . . . . . . . . . . . . . . . . pg. 6
Part ID ..................................pg. 7
Installation of I.D./Warning Plaque . . . . . . . . Final Step
WARNING
18’ 8” (5.7 m)
14’ 5” (4.4 m)
Solowave Design
375 Sligo Rd. West, PO Box 10
Mount Forest, ON Canada N0G 2L1
General Inquiries:
8:00am - 4:30pm EST
Toll Free: 1-877-966-3738
[email protected]
29' 4"
28'
17' 3"
13' 5"
18’ 8” (5.7 m)
14’ 5” (4.4 m)
28' 5"
28'
17' 3"
13' 5"
3403310 Rev 11/08/2012
To reduce the risk of serious injury or death, you must read and
follow these instructions. Keep and refer to these instructions often
and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 28’5” x 28’ area requires Protective Surfacing. See page 3.
MAXIMUM VERTICAL FALL HEIGHT - 7’6”
CAPACITY - 10 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.
WARNING
Solowave Design
375 Sligo Rd. West, PO Box 10
Mount Forest, ON Canada N0G 2L0
General Inquiries:
8:00am - 4:30pm EST
Toll Free: 1-877-966-3738
[email protected]

 2 [email protected]
Warnings and Safe Play Instructions
CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred
while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying
with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using
this play system. Go over the warnings and safe play instructions regularly with your children and make certain that they
understand and follow them. Remember on-site adult supervision is required for children of all ages.
Observe capacity limitations of your play-set. See
front cover.
Dress children with well fitting and full foot enclosing
footwear.
Teach children to sit with their full weight in the center
of the swing seat to prevent erratic swing motion or
falling off.
Check for splintered, broken or cracked wood; missing,
loose, or sharp edged hardware. Replace, tighten and or
sand smooth as required prior to playing.
Verify that suspended climbing ropes, rope ladders, chain
or cable are secured at both ends and cannot be looped
back on itself as to create an entanglement hazard.
On sunny and or hot days, check the slide and other
plastic rides to assure that they are not very hot as to
cause burns. Cool hot slide and rides with water and wipe
dry prior to using.
Do not allow children to wear open toe or heel footwear
like sandals, flip–flops or clogs.
Do not allow children to walk, in front, between, behind
or close to moving rides.
Do not let children twist swing chains or ropes or loop
them over the top support bar. This may reduce the
strength of the chain or rope and cause premature failure.
Do not let children get off rides while they are in motion.
Do not permit climbing on equipment when it is wet.
Do not permit rough play or use of equipment in a
manner for which it was not intended. Standing on or
jumping from the roof, elevated platforms, swings,
climbers, ladders or slide can be dangerous.
Do not allow children to swing empty rides or seats.
Do not allow children to go down slide head first or
run up slide.
WARNING
WARNING – Safe Play Instructions
2
SERIOUS HEAD INJURY HAZARD
Installation over concrete, asphalt, dirt, grass, carpet
and other hard surface creates a risk of serious injury
or death from falls to the ground. Install and maintain
shock absorbing material under and around play-set as
recommended on page 3 of these instructions.
COLLISION HAZARD
Place play-set on level ground at least 6 feet from any
obstruction such as a garage or house, fences, poles,
trees, sidewalks, walls, landscape timbers, rocks,
pavement, planters, garden borders, overhanging
branches, laundry lines, and electrical wires. (See
OBSTACLE FREE SAFETY ZONE on cover)
CHOKING HAZARD
Prior to assembly, this product contains small parts.
DO NOT allow children less than 5 years of age near or
around loose nuts, screws, washers, plastic bags and
other small parts.
STRANGULATION HAZARD
• NEVER allow children to play with ropes, clotheslines,
pet leashes, cables, chains or cord-like items when using
this play-set or to attach these items to play-set.
• NEVER allow children to wear loose fitting clothing,
ponchos, hoods, scarves, capes, necklaces, items with
draw-strings, cords or ties when using this play-set.
• NEVER allow children to wear bike or sport helmets
when using this play-set.
Failure to prohibit these items, even helmets with chin
straps, increases the risk of serious injury and death to
children from entanglement and strangulation.
TIP OVER HAZARD
Choose a level location for the equipment. This can reduce
the likelihood of the play set tipping over and loose-fill
surfacing materials washing away during heavy rains.
DO NOT allow children to play on the play-set until the
assembly is complete and the unit is properly anchored.

 3 [email protected]

 4 [email protected]

 5 [email protected]

 6 [email protected]
Keys to Assembly Success
Part Identification Key
On each page, you will find the parts and
quantities required to complete the assembly
step illustrated on that page. Here is a sample.
Symbols
Throughout these instructions symbols are provided as important reminders for proper and safe assembly.
Proper Hardware Assembly
Lag screws require drilling pilot
holes to avoid splitting wood. Only
a flat washer is required. For ease of
installation liquid soap can be used
on all lag-type screws.
For bolts, tap T-Nut into hole with
hammer. Insert the hex bolt through
lock washer first then flat washer then
hole. Because the assemblies need to
be squared do not completely tighten
until instructed. Pay close attention to
diameter of the bolts. 5/16” is slightly
larger than 1/4”.
Once the assembly is tightened, watch for exposed
threads. If a thread protrudes from the T-Nut, remove the
bolt and add washers to eliminate this condition. Extra
washers have been provided for this purpose.
This identifies information that requires special
attention. Improper assembly could lead to an
unsafe or dangerous condition.
Where this is shown, 2 or 3
people are required to safely
complete the step. To avoid
injury or damage to the
assembly make sure to get help!
Check that assembly is square
before tightening bolts.
Use a measuring tape to assure
proper location.
Check that set or assembly is properly level
before proceeding.
Pre-drill a pilot hole before
fastening screw or lag to prevent
splitting of wood.
This indicates time to tighten bolts, but
not too tight! Do not crush the wood.
This may create splinters and cause
structural damage.
Use
Help
Use
Help
Measure
Distance
Square
Assembly
Use
Level
Pre-drill
1/8” Bit
Tighten
Bolts
No Yes
CAUTION – Protrusion Hazard
Tools Required
6
Shovel Level #2 & #3 Phillips
or Robertson
Safety
Glasses
Drill (1/8”
3/16” Bit)
Measuring
Tape
Hammer Ratchet 1/2”,
7/16” & 9/16”
Square
Ruler
Step
Ladder
12342X Post 2 x 4 x 83”

 7 [email protected]
1 inch = 25.4mm
SOLO)WAVE DESIGN HARDWARE
For example:
BOLT LENGTH 4½ (4.5) inches long
114mm long
1 inch = 25.4mm
25.4mm
4.5 inches x
DIAMETER CONVERSION
LENGTH CONVERSION
=
BOLT DIAMETER 5/16 (0.31) inches 0.31 inches x 25.4mm = 8mm
For example:
HARDWARE LENGTH CHART
inches vs millimetres
6 152
5½ 140
5 127
4½ 114
4 102
3½ 89
3 76
2½ 64
2 51
1½ 38 1¼ 32
1-1/8 29
1 25.4
7/8 22 3/4 19 1/2 12.7
1/4" (6mm) Flat Washer
1/4" (6mm) Lock Washer
1/4"(0.25) = 6mm Hex Bolt
1/4" (6mm) T-Nut
5/16"(.31) = 8mm Lag Screw
5/16" (8mm) Flat Washer
1/4"(0.25) = 6mm Lag Screw
1/4" (6mm) Flat Washer
5/16" (8mm) Flat Washer
5/16" (8mm) Lock Washer
5/16"(.31) = 8mm Hex Bolt
5/16" (8mm) T-Nut
3/8"(.38) = 9.5mm Lag Screw
3/8" (9.5mm) Flat Washer

 8 [email protected]
1 x 2 1 x 4 1 x 5
1 x 6
1 x 3
1/2 x 4
5/4 x 6
5 1/2"
139.7
1"
25.4
11.1
.44
82.6
3 1/4"
4 x 4
3 1/2"
88.9
3 1/2"
88.9
4 1/2"
114.3
5/8"
15.9
15.9
5/8" 1 3/8"
34.9
2 x 6
5 3/8"
136.5
1 1/2"
38.1
15.9
5/8" 3 3/8"
85.7
60.3
2 3/8"
15.9
5/8"
1505mm
SOLO)WAVE DESIGN WOOD PROFILES
LENGTH CONVERSION
For example:
1 inch = 25.4mm
BOARD LENGTH 59¼ (59.25) inches 59.25 inches x 25.4mm =
Dimensions in brackets [mm] represent millimetres.
5/4 x 4
3 1/2"
88.9
1"
25.4
5 3/8"
136.5
5/8"
15.9
2 x 4
3 3/8"
85.7
1 3/8"
34.9
5/4 x 5
4 1/2"
114.3
1"
25.4 2 x 3
2 1/2"
63.5
1 3/8"
34.9
5/4 x 3
63.5
2 1/2"
25.4
1"
2 x 2
1 1/2"
38.1
1 1/2"
38.1

 9 [email protected]
(1) SL Floor 2 x 4 x 41½"

A3
Box 3

1 x 4 x 5"
P11
(2) Rock Wall Block
Box 3

(1) SW Floor 5/4 x 6 x 41½"
A9
Box 1
(1) Middle Floor 1 x 5 x 41½"

A7
Box 3

(2) Long Post 2 x 4 x 87"
A1
Box 2

(1) SL Ground 1 x 5 x 41½"
A2
Box 1

(2) Roof Picket 15" 1 x 2 x 15"
P2
Box 3
(2) Roof Picket 11" 1 x 2 x 11"

P1
Box 3

(1) Roof Picket 41" 1 x 2 x 41"
P0
Box 1

(2) Roof Picket 19" 1 x 2 x 19"
P3 Box 3

Box 3(1) SL Top 1 x 6 x 41½"
A4
Box 3

(2) Roof Picket 23" 1 x 2 x 23"
P4
Box 3

(1) Roof Picket 26" 1 x 2 x 26"
P5
Box 3

(1) SW Ground 1 x 5 x 78"
A8
Box 1
(2) Roof Picket 33" 1 x 2 x 33"

P8
Box 2

(2) Roof Picket 37" 1 x 2 x 37"
P9
Box 2

(2) Roof Picket 29" 1 x 2 x 29"
P7
Box 1
(2) Roof Picket 25" 1 x 2 x 25"

P6
Box 1

(1) Access Floor Joist 2 x 3 x 25"
B7
Box 3
(2) Floor Front Back 2 x 4 x 45½"

B4
Box 2
(2) Lower Diagonal 2 x 3 x 37"

B2
Box 2

(1) Floor Joist 5/4 x 4 x 46"
B6
Box 2
(2) Ground Front/Back 1 x 5 x 75½"

B3
Box 1
(1) CE Gap Board 1 x 6 x 38¾"

B5
Box 3
(4) Short Post 2 x 4 x 84"

A5
Box 3
Part Identification 5HGXFHG6L]H

(4) Lower Post 2 x 3 x 56"
B1
Box 1

A6
(1) Inner Floor 5/4 x 4 x 41½"


 10 [email protected]
3610839
(20) CE Gap Boards 1 x 4 x 38¾"
B0
Box 3
(1) Ladder Bottom 5/4 x 4 x 20"
3660822
D4
Box 2
(1) Wall Front 5/4 x 6 x 76"
3660958
C2
Box 1
3660966
(4) Roof Block 2 x 4 x 17"
C1
Box 1
3660959
(1) Joist 2 x 3 x 25"
B9
Box 3
(1) Center Floor Joist 5/4 x 4 x 25"
3660977
B8
Box 1
Part Identification (Reduced Size)
(4) Post Support 1 x 4 x 41"
3660957
C7
Box 3
(1) Right Access 2 x 3 x 55"
3660940
D1
Box 2
(1) CE Gap Board 1 x 4 x 38¾"
3620839
C8
Box 1
(1) Wall Back 1 x 6 x 76"
3660960
C3
Box 3
(1) Top Front 5/4 x 5 x 45½"
3660961
C6
Box 3
(1) Left Access 2 x 3 x 55"
3660953
D2
Box 2
(1) Middle Top 1 x 4 x 41½"
3660968
C5
Box 3
3660436
Box 1(1) SW Top 5/4 x 6 x 41½"
C4
(2) Rock Rail 5/4 x 4 x 51"
3660714
D6
Box 2
(2) Rock Side 2 x 2 x 49"
3660715
D5 Box 1
(3) Tennon Dowel 1⅛ x 18⅝"
D3 Box 1
8

 11 [email protected]
Part Identification (Reduced Size)
3610738
(4) Rock Board B 1 x 6 x 23½"
D9
Box 3
(2) Cedar Wall 1 x 4 x 28"
3625265
E1
Box 1
(1) Tarp Ridge 2 x 2 x 30½"
3660963
R5 Box 1
(22) Cedar Roofing 3/8 x 3½ x 47½"
3625155
R7
Box 2
(2) Roof Fascia 1 x 4 x 48½"
3660942
R8
Box 2
(2) Left Roof Support 2 x 3 x 39¾"
3660972
R2
Box 2
(2) Roof Side 2 x 3 x 49"
3660944
R6
Box 2
Box 1
3660962
R4 (1) Tarp Upright 2 x 2 x 24½"
(2) Right Roof Support 2 x 3 x 39¾"
3660967
R1
Box 2
3610737
(5) Rock Board A 1 x 6 x 23½"
D8
Box 3
(1) Front Wall 1 x 4 x 33"
3660974
E2
Box 2
(1) Lower Wall 5/4 x 6 x 33"
3660970
E3
Box 1
(4) Window Gap 1 x 2½ x 13
3660954
E4
Box 1
(2) Cedar Wall Board 1 x 6 x 34¼"
3620301
E5
Box 3
(2) CE Wall Board 1 x 5 x 23½"
3625254
E6
Box 3
(1) CE Wall Board 1 x 5 x 13"
3620305
E7
Box 3
(2) CE Wall Board 1 x 4 x 13"
3620303
E8
Box 3
(6) Window Brace 5/4 x 2 x 9¼"
3660950
E9 Box 3
(4) CE Wall Boards 1 x 6 x 23½"
3620702
F2
Box 1
(2) Lower Chalkwall 1 x 4 x 45½"
3660971
F3
Box 2
3660459
(1) Wall Mount 2 x 4 x 32¾"
F1
Box 1
(2) Cedar Wall 1 x 4 x 23½"
3620705
F4
Box 3
(2) Seat Table Support 2 x 6 x 16¾"
3660701
T1
Box 3
(1) Cafe Seat 5/4 x 6 x 27¼"
3610952
T2
Box 1
(2) Table Top 1 x 6 x 29"
3610949
T3
Box 1
(2) Roof Joist 2 x 2 x 38¾"
3660943
R3
Box 1
9

 12 [email protected]
3200184
Box 1
(1 pkg of 4)
Triangle Plate
(2) Glider Hanger
Box 1
Box 1
(1 pkg of 2)
Hand Grip
(6) Ground Stake 2 x 2 x 14"
3660318
X6
Box 1
(1) Chalk Panel
3750704
Box 1
(1) Greenbrook Canopy
(1) Space Glider Body
Box 1
3320268
Box 1
(2) Space Glider Handle
3320177
Box 1
3320175
Arch Window
(1 pkg of 3)
Screws included
Rocks w/ Hardware
(1 pkg of 9)
3320211
Box 1
(1) Cafe Frame
3750840
(1) Cafe Canopy
Box 1
(2) Long Belt Swing
Box 1
Box 1
3318120
3200202
Box 1
3724931
(4) Glider Rope & Chain
(1) Blow Molded
Slide
Accessories
3533860
Part Identification (Reduced Size)
(2) SW Post 2 x 4 x 92½"
3664922
X2
Box 2
(2) SW Beam 2 x 6 x 94½"
3664926
X1
Box 1
(1) SW Upright 2 x 4 x 50½"
3664920
X3
Box 1
(1) SW Support 5/4 x 4 x 48½"
3664921
X4
Box 1
3664919
(1) SW Rail Block 2 x 4 x 5 "
X5
Box 3
10
Part Identification (Reduced Part Size)
1X 3310148 Slide 48" High Rail -Green
1X 3320386 Rocks (5pk) 3-Green 2-Yellow
1X 3200202 Glider Hanger (2pk)
1X 3320356 Big Backyard I.D Plaque w hardware
2X 3724943 42" Belt Swing Yellow w.welded chain
1X 3200184 Triangle Plate (4pk) Green
1X 3533860 39" Glider Rope & Chain (4pk) w. welded chain
1X 3202000 Swing Hanger Bolt Thru. (4 pk)
1X 3201103 (4pk) Corner Brace Set
1X 9750111 Chalk Wall Tarp
1X 9750110 Springfield Canopy
1X 3320268 Space Glider Body Yellow
2X 3320177 Space Glider Handle Green
Part Identification (Reduced Part Size)
1X 3310148 Slide 48" High Rail -Green
1X 3320386 Rocks (5pk) 3-Green 2-Yellow
1X 3200202 Glider Hanger (2pk)
1X 3320356 Big Backyard I.D Plaque w hardware
2X 3724943 42" Belt Swing Yellow w.welded chain
1X 3200184 Triangle Plate (4pk) Green
1X 3533860 39" Glider Rope & Chain (4pk) w. welded chain
1X 3202000 Swing Hanger Bolt Thru. (4 pk)
1X 3201103 (4pk) Corner Brace Set
1X 9750111 Chalk Wall Tarp
1X 9750110 Springfield Canopy
1X 3320268 Space Glider Body Yellow
2X 3320177 Space Glider Handle Green
(1) Back Beam 2 x 6 x 83⅝"
X7
3621825
Accessories
3664920
X3
(1) SW Upright 2 x 4 x 50½"
3664922
X2
(2) SW Post 2 x 4 x 92½"
Part Identification (Reduced Size)
(2) Long Belt Swing
(1) Cafe Canopy
(1) Cafe Frame
3664921
X4
(1) SW Support 5/4 x 4 x 48½"
(1) Big Backyard
Plaque
3664919
X5
(1) SW Rail Block 2 x 4 x 5⅜"
(3) Arch Window
(1) Chalk Panel
(2) Glider End
(1) Front Beam 2 x 6 x 83⅝"
X1
3621826
(1) Slide Top
(1) Slide Bottom
(11) Rocks w/ Hardware
(1) Greenbrook Canopy
(6) Ground Stake 2 x 2 x 14"
3660318
X6
(1) Glider Seat

 13 [email protected]
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H1 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H7 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H5 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H2 
Hardware Identification$FWXDO6L]H
+H[%ROW[)ODW:DVKHU)ODW:DVKHU

LOCK 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
G1 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H3 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H9 
1\ORN1XW
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H6 

+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
G4 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H8 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
H4 
+H[%ROW[
/RFN:DVKHU)ODW:DVKHU71XW
G5 
11

 14 [email protected]
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
18pc. TN2 -5/16"T-Nut- (9285300)
5pc. BN1 -1/4"BarrelNut-(9248200)
37pc. TN1 -1/4"T-Nut-(9285200)
42pc. LW1 -1/4"LockWasher-(9253200)
42pc. FW2 -5/16"FlatWasher-(9251300)
47pc. FW1 -1/4"FlatWasher-(9251200)
15pc. FW0 -3/16"FlatWasher-(9251100)
24pc. FW3 -#8FlatWasher-(9251500)
20pc. -S1 -WoodScrew#8x1-1/8"-(9290514)
93pc. -S2 -WoodScrew#8x1-1/2"-(9260512)
8pc. -S22 -TrussScrew#8x7/8"-(9269505)
2pc. -Z -HexBolt5/16x6"-(9277360)
4pc. -G7 -HexBolt5/16x5-1/2"-(9277352)
5pc. -G5 -HexBolt5/16x4-1/2"-(9277342)
6pc. -PB2 -PanBolt1/4x1-1/4"-(9274211)
18pc. LW2 -5/16"LockWasher-(9253300)
12pc. LN2 -5/16"LockNut- (9283300)
14pc. -S6 -PanScrew#12x1"-(9264610)
15pc. -S7 -PanScrew#12x2"-(9264620)
10pc. -S4 -WoodScrew#8x3"-(9290530)
19pc. -S3 -WoodScrew#8x2-1/2"-(9260522)
Hardware Identification(ActualSize)
4pc. -S15 -WoodScrew#8x1-3/4"-(9260513)
5pc. -S10 -PanScrew#8x1"-(9264510)
38pc. -S5 -PanScrew#8x1/2"-(9264504)
G25
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
Hardware Identification (Actual Size)
5/16" Flat Washer
S2 (320) Wood Screw #8 x 1-1/2" (9260512)
S3
(24) Wood Screw #8 x 2-1/2" (9260522)
S4
(49) Wood Screw #8 x 3" (9260530)
S9
(24) Pan Screw #12 x 2" (9264620)
S1
(25) Wood Screw #8 x 1-1/8" (9260514)
S5
(29) Pan Screw #8 x 1/2" (9264502)
(4) Bolt-Thru Swing Hangers
(3202000)
(29)
#8 Flat Washer
(9251500)
(2) Hex Bolt 5/16 x 7-1/4" Zinc 5/16" Flat Washer
Nylok Nut
Z
3(16) Lag Screw 1/4 x 3" - 1/4" Flat Washer
9262230
1½ (4) Lag Screw 1/4 x 1 1/2" - 1/4" Flat Washer
9262212
(76)
1/4" T-Nut
(9285200)
⅜
(4) Lag Screw 3/8 x 3" - 3/8" Flat Washer
9262830
(13)
5/16" T-Nut
(9285300)
(94)
1/4" Flat Washer
(9251200)
(70)
1/4" Lock Washer
(9253200)
(37)
5/16" Flat Washer
(9251300)
(13)
5/16" Lock Washer
(9253300)
(12)
5/16" Nylok Nut
(9283300)
S8
(8) Pan Screw #12 x 1" (9264610)
S7
(2) Pan Screw #12 x 3/4" (9264603)
S6
(66) Truss Head Screw #8 x 7/8" (9229505)
(2) Spiral Wave Bracket
(9201500)
(4)
3/8" Flat Washer
(9251800)
12
9277471
1X 3202000
Swing Hanger Bolt
Thru. (4 pk)
1X 3202000
Swing Hanger Bolt
Thru. (4 pk)

 15 [email protected]
THIS IS THE TIME FOR YOU TO SORT, IDENTIFY, AND COUNT ALL YOUR HARDWARE, WOOD
PIECES AND ACCESSORIES. THIS WILL ASSIST YOU IN YOUR ASSEMBLY.
WHEN THE PARTS IDENTIFICATION IS COMPLETED, YOU ARE READY TO START ASSEMBLY.
IF YOU NEED ASSISTANCE CONTACT THE CONSUMER RELATIONS DEPARTMENT AT
1-877-966-3738
[email protected]
• FILL THIS OUT BEFORE YOU DISCARD YOUR CARTONS
• THE CARTON I.D. STAMP IS LOCATED ON THE END OF EACH CARTON
• YOU WILL NEED THIS INFORMATION IF YOU CALL CONSUMER RELATIONS DEPARTMENT
PRODUCT NUMBER: F23300
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 1)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 2)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 3)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 4)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 5)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 6)
STOP
Additional Parts List (Box 1):
1. Warning I.D. Plaque c/w hardware (3320356)
13
F23310

 16 [email protected]
8X
Square
2X
Hardware
SL Ground 1 x 5 x 41½"
Wood Parts
1X
Tighten
H5
A1
A2
Then
1X
SL Top 1 x 6 x 41½"A4
Hex Bolt 1/4 x 4"
Long Post 2 x 4 x 87"
1X
Bolts
2X
SL Floor 2 x 4 x 41½"A3
Assembly
H8 Hex Bolt 1/4 x 4¾"
Attach (A2) SL Ground, (A4) SL Top using (H5)
Bolts to the (A1) Long Posts and (A3) SL Floor
using (H8) Bolts to (A1) Long Post.
Square the Assembly before fully tightening
Bolts.
H5
A1
A2
A3
H8
A1
A4
H5
BOLTING EXAMPLE
STEP 1 Slide Wall Assembly
14

 17 [email protected]
Use factory drilled
hole as a guide
Predrill 1/8"
pilot hole
Predrill Pilot Holes for Lag Screws
A6
3
Then Tighten
2X
Hardware
Hex Bolt 1/4 x 4"
2X
Assembly
Middle Floor 1 x 5 x 41½"
Lag Screw 1/4 x 3"
2X
H5
Short Post 2 x 4 x 84"
Square
Wood Parts
1X
1X
2X A5
Inner Floor 5/4 x 4 x 41½"
Bolts
A7
H7 Hex Bolt 1/4 x 4½"
Predrill 1/8" pilot holes for the Lag Screws using factory
drilled holes as guides. Finally, fasten (A7) Middle Floor
with 3" Lag Screws.
Attach (A6) Inner Floor using (H7) Bolts, and (A7) Middle Floor
using (H5) Bolts to the (A5) Short Posts. Square the Assembly
before fully tightening Bolts.
Fasten Lag Screws
STEP 2 Middle Wall Assembly
A7
A5H7
A5
H5
A6
BOLTING EXAMPLE
3
A7
15

 18 [email protected]
BOLTING EXAMPLE
A5
Lower Post in next
A8 A9
H5
step.
A5
H5
A5
H7
Place (4) 1/4" T-Nuts
in empty holes. They
will become trapped by
Swing Wall AssemblySTEP 3A
STEP 3B
Bottom edges
to be flush
33
3
3
S4
S4
H1
H1
B1
B2
B2
A5
A5
A8
A9
B1
Note:
(B1) is mounted
to (A5) on edge.
Assembly
(A5)
Then
Wood Parts
before
4X
Hex Bolt 1/4 x 4"
(H7)
fully tightening Bolts.
Square the Assembly
Hex Bolt 1/4 x 4½"
Square
Wood Screw #8 x 3"
2X
Bolts to the
3
SW Ground 1 x 5 x 78"
Short Post 2 x 4 x 84"
Assembly Bolts
10X
Attach Lower Diagonals, Lower Posts
Hex Bolt 1/4 x 2"H1
A9
A8
4X
Lag Screw 1/4 x 3"
SW Floor 5/4 x 6 x 41½"
T-Nut 1/4"
Lower Diagonal 2 x 3 x 37"
Short Posts.
H5
2X
Tighten
Wood Parts
1X
2X
Square
Hardware
Hardware
B1
Then
1X
2X
Lower Post 2 x 3 x 56"2X
A5 Attach (A8) SW Ground using (H5) Bolts and (A9)
SW Floor using
H7
B2
S4
4X
Attach (B1) Lower Posts to the (A5) Short Posts,
flush with the bottom edge, using (S4) Screws.
Then, attach (B2) Lower Diagonals to (A8) SW
Ground using (H1) Bolts. Square the Assembly and
predrill 1/8" pilot holes for the Lag Screws using
factory drilled holes as guides. Finally, fasten (B2)
Lower Diagonal and (A9) SW Floor to (A5) Short
Posts using 3" Lag Screws.
Use factory drilled
hole as a guide
Predrill 1/8"
pilot hole
Predrill Pilot Holes for Lag Screws


 19 [email protected]
BOLTING EXAMPLE
STEP 4 Connect Wall Assemblies
H1
B3
H3
B4
Swing Wall
B4
H1
H1
Middle Wall
B3
Slide Wall
H1
H3
Tighten
Assembly
4X
(H1)
Hex Bolt 1/4 x 2¾"
Ground Front/Back 1 x 5 x 75½"
B4
(H3)
H1
Hardware
2X
12X
Front/Back, using
Floor
Bolts
Wood Parts
Bolts.
Floor Front/Back 2 x 4 x 45½"
2X
Then
Bolts and
Hex Bolt 1/4 x 2"
Square
(B4)
B3 Using help, connect the Swing Wall, Middle Wall
and Slide Wall Assemblies with (B3) Ground
Front/Back using
H3
Use
Help


 20 [email protected]
STEP 5 $WWDFK)ORRU-RLVWV
5X Wood Screw #8 x 1½"
&HQWHU)ORRU-RLVWDQG
S4
1X
S2
,QQHU)ORRUXVLQJ
16X
$FFHVV)ORRU-RLVW(B8)
(A6)
6/)ORRUDQG
+DUGZDUH
:RRG3DUWV
$WWDFK
-RLVWEHWZHHQ
(B7)
B51X
Floor Joist 5/4 x 4 x 46"
B6
(A3)
6FUHZV
CE Gap Board 1 x 6 x 38¾"
(B9)
B71X
Center Floor Joist 5/4 x 4 x 25"B8
Joist 2 x 3 x 25"
Wood Screw #8 x 3"
B9
(S4)
1X
Access Floor Joist 2 x 3 x 25"
1X
$WWDFK(B5)&(*DS%RDUGWRWKH(B4))ORRU)URQW%DFNVZLWK
(S2)6FUHZV7KHQSRVLWLRQ(B6))ORRU-RLVWIOXVKZLWKWKH
ERWWRPRI(B5)DQGDWWDFKWR(A9)6:)ORRUDQG(A7)0LGGOH
)ORRUZLWK(S4)6FUHZV
B8
%
S4
S4
B5
$
B6
B9
S4
$
S2
B7
%
S2
$ S4
$
S2
