Bike-Lift TWIN-ARMS MTA 516 User manual

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 1
EN
EC Use and Maintenance Manual
Scissor lifting platform
TWIN-ARMS MTA 51
Model Version


MTA516-002 COMPRESSED AIR PUMP


MTA516-003 ELECTRO-HYDRAULIC PUMP


MTA516-004/R ELECTRONIC WITH REMOTE CONTROL
Bike-Lift EUROPE s.r.l.
via Don Milani, 40/42
43012 anguinaro di Fontanellato (PARMA) – Italy
Website: www.bikelifteurope.it
E-mail: [e-mail]

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 2
EN
Summary
1
1.1 Pref ce ............................................................................................................................................... 4
1.2 Prohibitions........................................................................................................................................ 5
1.3 W rr nty ............................................................................................................................................ 5
1.3.1 W rr nty conditions .................................................................................................................. 5
1.3.2 Insur nce ................................................................................................................................... 5
1.4 M nuf cturer identific tion .............................................................................................................. 6
1.5 Technic l ssist nce nd sp re p rts ................................................................................................ 6
1.6 EC Decl r tion of conformity ............................................................................................................ 7
1.7 Norm tive references ........................................................................................................................ 8
1.8 Key ..................................................................................................................................................... 9
2 M chine description .................................................................................................................... 10
2.1 M chine n me ................................................................................................................................. 10
2.2 M chine identific tion ..................................................................................................................... 10
2.3 M chine description ........................................................................................................................ 11
2.4 Intended use .................................................................................................................................... 12
2.5 Technic l specific tions ................................................................................................................... 13
3 S fety section .................................................................................................................................... 15
3.1 Environment l working v lues ........................................................................................................ 15
3.2 Sound level ...................................................................................................................................... 15
3.3 Residu l risks ................................................................................................................................... 15
3.4 Oper tor protections ....................................................................................................................... 16
3.5 S fety systems ................................................................................................................................. 16
3.6 Pictogr ms ....................................................................................................................................... 17
4 Tr nsport nd h ndling section ....................................................................................................... 18
4.1 Tr nsport, h ndling nd stor ge ..................................................................................................... 18
4.2 P ck ging nd tr nsport .................................................................................................................. 18
4.3 Unlo ding nd h ndling ................................................................................................................... 18
4.4 Receipt nd check ............................................................................................................................ 19
4.5 Stor ge ............................................................................................................................................. 19
5 Inst ll tion section .......................................................................................................................... 20
5.1 Power ............................................................................................................................................... 20
5.2 Putting into service .......................................................................................................................... 21
Inform
t
ion section
................................
................................
................................
.............................
4

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 4
EN
6 Dism ntling/scr pping section ........................................................................................................ 22
6.1 Dism ntling ...................................................................................................................................... 22
6.2 Mech nic l dism ntling ................................................................................................................... 22
6.3 Scr pping .......................................................................................................................................... 22
7 Oper tion section ............................................................................................................................. 23
7.1 Lo ding oper tions .......................................................................................................................... 24
7.1.1 Oper tion with re r wheel suspended ................................................................................... 24
7.1.2 Oper tion with front wheel suspended .................................................................................. 24
7.1.3 Oper tion with both wheels lifted ........................................................................................... 25
7.2 Unlo ding oper tions ...................................................................................................................... 25
7.3 Lifting types ...................................................................................................................................... 26
7.3.1 COMPRESSED AIR PUMP - element code - 002 ....................................................................... 26
7.3.2 ELECTRO HYDRAULIC PUMP - element code - 003 .................................................................. 26
7.3.3 ELECTRONIC WITH REMOTE CONTROL - element code 004/R 27 ........................................... 24
8 M inten nce section ........................................................................................................................ 28
8.1 Lubric tion ....................................................................................................................................... 28
8.2 Bleeding of the hydr ulic circuit ...................................................................................................... 28
8.3 Piston repl cement .......................................................................................................................... 29
8.4 Cle ning............................................................................................................................................ 30
8.4.1 Initi l cle ning .......................................................................................................................... 30
8.4.2 Gener l cle ning of the m chine ............................................................................................. 30
8.4.3 Cle ning of the work re s ...................................................................................................... 31
8.5 Problems nd remedies ................................................................................................................... 31
8.5.1 AIR PUMP ................................................................................................................................. 32
8.5.2 ELECTRIC PUMP ........................................................................................................................ 34
9 Accessories ........................................................................................................................................ 36
SPARE PARTS - TECHNICAL DRAWINGS ........................................................................................................... 37

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 5
EN
1 Information section
1.1 Preface
The E Use and Maintenance Manual is a document issued by Bike-Lift Europe s.r.l. as an
integral part of the Machine.
The purpose of this publication is to provide the operator with efficient and safe instructions
regarding the use and maintenance.
This Manual must be read entirely before starting any operation concerning the
installation, use, maintenance and putting out of service of the machine; therefore
it is necessary to be kept intact over time.
In order to properly store the Manual it is recommended to:
 Use the manual without deteriorating it;
 Do not remove, add, change or rewrite any part of the Manual; any modifications must
be made only by Bike-Lift-Europe s.r.l.;
 Keep the Manual in areas protected against humidity in order not to compromise its
durability over time;
 Deliver the Manual to any other user or subsequent owner of the Machine.
Workers in charge of using this machine must have all the necessary information
and must receive proper training.
The manual and relative documentation are confidential by law with the prohibition of
reproduction or transmission to third parties without receiving the explicit authorization of
the manufacturer.
As a partial exception to the above mentioned, a copy of this Manual kept in the vicinity of the
Machine is allowed for prompt reference, in case the original document is stored in a different
place, in order to guarantee better keeping over time.
Drawings, data and specifications contained in this manual can be modified at any time by the
company, without prior notice.
In case of significant changes of the machine due to the installation of new parts, Bike-Lift
Europe s.r.l. will compile an updated Manual that will be sent to the ustomer together with
the purchased part.

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 6
EN
1.2 Prohibitions
The installation, use, maintenance and putting out of service of the device with means, objects,
actions and anything else not provided for in this manual is considered improper and
therefore the manufacturer declines all responsibility for the consequences that may occur
regarding people, animals and objects.
It is expressly FORBIDDEN the use of the Machine by Operators who do not
know the regulation and procedures described in the Manual and by
unauthorized people (hereinafter referred to as "non-operators").
It is also forbidden the use of the machine by children and the non-operators or children must
not stand near the machine during all phases of the machine's life.
The putting out of service of the protection systems or anything else provided by the
manufacturer to protect the operators is the sole responsibility of the Purchaser or the
Machine's User.
Any mechanical, electrical or functional change of the Machine (not provided for in this
Manual) regarding the control systems, the logic of controls, the circuits present and the
safety systems is prohibited without the prior written authorization of the manufacturer.
1.3 Warranty
Bike-Lift Europe s.r.l. will not be held responsible for inconveniences, breakages, accidents,
etc. due to lack of knowledge or failure to apply the procedures specified in this Manual. The
same applies to the execution of modifications, changes or for the installation of accessories
not previously authorized.
1.3.1 Warranty conditions
Bike-Lift Europe s.r.l guarantees its products for 12 months, except for the commercial
components that are guaranteed by the manufacturers.
All worn parts are excluded from the warranty.
The warranty is limited to the replacement, ex-works Bike-Lift Europe s.r.l, of those parts that
are recognized as defective by Bike-Lift Europe s.r.l due to a material or manufacturing defect
and do not include labor or travel expenses required for their replacement.
The recognition of the warranty is void if the anomaly is due to an inappropriate use of the
product, if the installation was not carried out according to the provisions of the company or if
non-genuine parts were installed.
It also becomes void if the product has been submitted to performances exceeding those
indicated by Bike-Lift Europe s.r.l.
1.3.2 Insurance
All Bike-Lift-Europe s.r.l products are insured with an R P policy with a price ceiling of
€ 3.000.000. Damages caused by negligence or tampering are excluded.

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 7
EN
1.4 Manufacturer identification
Bike-Lift EUROPE s.r.l. via Don Milani, 40/42, 43012 Sanguinaro di Fontanellato (PARMA)
– Italy
Website:
www.bikelifteurope.it
E-mail:
[email protected]
Tel: [phone] Fax: [phone]
1.5 echnical assistance and spare parts
To order spare parts, it is recommended to specify exactly the following data:
 Model and serial number of the machine;
 ode number and part name;
 Required quantity;
 Shipping means, address and telephone number; For
replacements use only genuine spare parts.
Do not wait until the components are completely worn before replacing them.
AUTION: THE RE IPIENT WILL BE HARGED FOR THE REPLA EMENT TOGETHER
WITH THE SHIPPING OSTS.
We recommend that you always contact Bike-Lift Europe s.r.l. for all those Assistance and
maintenance operations that are not described or indicated in this Manual.

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 8
EN
1.6 EC Declaration of conformity
(Annex II, part 1, section A of directive 2006/42/EC)
Manufacturer:
Company: ike-Lift EUROPE S.r.l.
Address: Via Don Milani, 40/42 - 43012 Sanguinaro di Fontanellato (PR) - Italy
Declares under its sole responsibility that the machine:
Designation: MAX Twin Arms 516 Lifting platform
Model: MTA516-002
Serial number:
Year:
Function: Lifting of motorcycles for vehicle maintenance operations
Complies with the essential safety requirements of the following Directive:
 200 /42/EC – Machineries Directive
Complies with the requirements of the following Harmonized Standards:
 UNI EN ISO 12100:2010 - Safety of machinery - General principles of design - Risk assessment
and risk reduction
 UNI EN 1493:2010 – Lifts for vehicles
Person authorized to prepare the Technical Sheet:
Name: Alessandro Tozzi
Address: Via Don Milani, 40/42 - 43012 Sanguinaro di Fontanellato (PR) - Italy
Alessandro Tozzi
Legal Representative

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 9
EN
1.7 Normative references
The machine is identified by the E marking drawn up according to the specifications of the
Machinery Directive 2006/42/E and subsequent updates.
Reference Title
2006/42/E Machinery Safety Directive
2014/30/E Electromagnetic ompatibility Directive (EM )
2014/35/EU Low Voltage Directive (LVD)
EN ISO 12100 (2010)
Safety of machinery - General principles of design - Risk
assessment and risk reduction.
UNI EN 349 (1993+A1:
2008)
Safety of machinery -
Minimum spaces to avoid the crushing of
body parts.
EN 1493 (2010) European standard on vehicle lifting platforms
EN 60204-1 (2016)
Directive on the state of the art for the design and
construction of the electrical equipment of machines,
including the switchboard connected to the machines.
EN 982 (2009)
Safety of machinery - Safety requirements related to systems
and their components for hydraulic fluid and pneumatic
transmissions
-
Hydraulic fluid
UNI 1285-68 alculation of metal pipes resistance subject to internal
pressure

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 10
EN
1.8 Key
LIF ING PLA FORM: hydraulic/electric/pneumatic lifting system (additional to the scissor
lifting system) for the maintenance and repair of motorcycles. The specific identification of
the lifting platform is indicated on the cover.
OPERA OR: In compliance with Directive 2006/42/E and subsequent updates, it is
specified that the term "operator" means the person (s) in charge of installing, operating,
adjusting and cleaning the lifting platform. The maintenance and repair operations of the
lifting platform are the responsibility of competent personnel.
SYMBOLS
MEANING
Yellow tri ngle pictogr m gener lly indic tes W rning /Risk, e.g. risk of high temper tures,
risk of crushing the h nds, ...
BLUE round pictogr m gener lly indic tes n Oblig tion, for ex mple the oblig tion to
we r cert in PPE (goggles ...) or the Oblig tion to re d the User M nu l.
Round red Prohibition pictogr m indic tes in gener l Prohibition, for ex mple, person
ccess prohibition, prohibition of h nd ccess while the vehicle is moving.
Indic tes th t the oper tion c n be performed by speci lized personnel uthorized by the
Employer.
P rticul r import nce indic tion th t requires ttention.
Specifies n oper tion th t c n only be performed by tr ined personnel, or fter h ving
re d nd consulted specific oper ting instructions.

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 11
EN
2 Machine description
2.1 Machine name
Additional lift to the lifting platform system for the maintenance and repair of motorcycles with
a maximum capacity of 350 kg.
The handling of Bike-Lift-Europe s.r.l lifting platforms can be done through one of the following
systems:
- compressed air system;
- electro-hydraulic system;
- electronic system with remote control
This manual refers to the model of lifting platform indicated on the cover
2.2 Machine identification
Figure 1 - Example of a plate affixed to the machine
The identification data of the machine are indicated on the plate placed on the structure and
shown in the attached declaration of conformity.
Refer to these details for ordering spare parts and for any kind of contact with the manufacturer
It is absolutely forbidden for the user to remove or alter this plate. Any modification or
removal of the plate will void any warranty.
The machines can be subject to updates or small aesthetic changes and therefore have
different details than those shown, without prejudice to the descriptions and procedures
contained by this Manual.

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 12
EN
2.3 Machine description
The machine known as Additional component 516 is a suitable equipment to support
motorcycles during the maintenance and repair phase in a comfortable and safe way, being
fixed to the work surface of the platform.
The basic parts of the lifting platform (see Figure 2) are:
Figure 2 - Model of a lifting platform
- An automatic vise for the front wheel (yellow)
- The additional lifting component (blue) that can be anchored on the scissor lifting
platform and slides along the guides;
- ouplings for sliding belts (green)
- Non-return valve.

Operating manual No. 057-2-6-0013-R0
Version 2021
Page 13
EN
-
2.4 Intended use
Disseminate the instructions described in this chapter to all personnel involved
in the preparation and use of the machine.
The machine is designed for additional lifting of motorcycles for maintenance purposes.
The machine has been designed and built for the specified use; a different use and
non-compliance with the technical parameters set by the Manufacturer may be
dangerous for the operators.
It can be used in the mechanical motorcycles repair shops both for the mechanical part and
for the bodywork.
The Operator must always work in proper lighting conditions and wear clothes and
protections appropriate to the task performed (typical activity of mechanical workshop)
The working position of the operator during the ascent and descent phases is in the area
around the machine at the safety distance allowed by the cable length of the control panel.
It is absolutely forbidden to lift motorcycles while leaning on the side
kickstand
Do not try to lift motor vehicles weighing more than the maximum capacity
of the platform.
Do not try to lift four-wheeled vehicles, using two lifting platforms placed
side by side.
Do not stand under the suspended motorcycle.
Any other use different from the one indicated is to be considered as not
planned and may cause damage to the machine and Operators. It is therefore
FORBIDDEN .
The machine must always be operated by only one Operator.

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 14
EN
2.5 echnical specifications
(see exploded di gr m tt ched to this m nu l)
TWIN ARMS – MTA 516 OMPONENT
PARAMETER VALUE
Maximum bearing 500 kg
Maximum height 120 cm
Minimum height 19 cm
Safety positions number 7
Length 220 cm
Hydraulic arms max. bearing 350 kg
Hydraulic arms max. height 70 cm
Hydraulic arms min. height 35 cm
Lifting surface size 210x75 cm
Total space of the lifting platform 210x99 cm
Ascent ramp size 82x45 cm
Total space of the lift 220x99 cm
Weight 280 kg
The following additional data are available depending on the type of handling:
2.5.1.1 MTA 516 – MTA516-002
AIR PUMP (AIR-HYDRAULI )
PARAMETER VALUE
Air pressure 7-10 Bar
Air consumption 300 Lt/Min.
2.5.1.2 MTA 516 – MTA516-003
ELE TRO-HYDRAULI ONTROL UNIT
PARAMETER VALUE
Available power supplies
230Volt- 50Hz Europe
200Volt-50/60Hz
Japan
110Volt-60Hz USA
Power 1,1 kW
Available controls Series button panel

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 15
EN
3 Safety section
3.1 Environmental working values
The use environment of the machine must be well lit, must not present explosion hazards of
any kind and must be protected from atmospheric precipitations.
The machine works properly within the following values:
 Ambient temperature between 5° and 40° ;
 Ambient humidity between 30% and 90% without condensation;
STORAGE: if the machine has been unpacked, store it in a closed space protected from bad
weather conditions.
3.2 Sound level
During the normal conditions of use some measurements were made at the workplace and
around the machine at a distance of 1 m and at 1.6 m height above the ground.
The survey was carried out with a sound level meter, complying with IE 651 standard, class
1 and the result of the assessment was lower than the minimum limit of action required by the
regulations in force.
3.3 Residual risks
The use of the lifting platform is the absolute prerogative of professional
operators and specialized technicians, in compliance with the
requirements
of M chinery Directive 2006/42/ EC nd subsequent upd tes.
Operators must be in full possession of all physical and mental abilities during the
performance of their tasks on the machine; they must not, for example, be under the influence
of sedatives, drugs or alcohol.
Before carrying out the work, the Operators must be perfectly aware
of the position and operation of all the controls and specifications of
the machine indicated in the "E Use and Maintenance Manual".
It is forbidden to use the lifting platform for a purpose other than those provided by the
manufacturer. Always pay attention to the danger and/or warning signs placed on the machine
or in adjacent areas.
The machine must always be operated by only one Operator
placed at the safety distance allowed by the cable length of the
control panel.
The operators standing areas must always be kept clean and free of any oily residues to allow
an easy and safe passage.
The putting out of service of the protection and safety devices for protecting the operators is

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 16
EN
the sole responsibility of the Purchaser or the Machine's user.
Finally, we remind you that the handling, installation, use, maintenance and putting out of
service of the machine represent a source of danger if these operations are not performed in
compliance with the requirements of this Manual or without the necessary caution and
attention required.
(More details regarding the Risk Assessment to be requested from the Manufacturer).
3.4 Operator protections
3.5 Safety systems
BEFORE EA H USE OF THE OMPONENT, MAKE SURE THAT
IT IS FIRMLY FIXED ON THE S ISSOR LIFTING PLATFORM.
The single lifting piston has a non-return valve that locks the cylinders in case the oil cable is
blanked.
Follow the safety instructions for securing the lower lifting system.
(an excerpt of the safety instructions for the 500 kg scissor lifting platform is reported- Bike-
Lift Europe s.r.l)
Before starting any type of work on the motorcycle lifting platform,
the operator must wear appropriate personal protective equipment
(PPE), such as gloves and safety footwear.
Always wear work clothing normally used in the mechanical
workshop activity.
In order to make the machine safe during the ascent phase:
1- Allow the anchoring bar to move freely around the perimeter of the toothed bar
on the base;
2- When the selected position is reached, leave the bar uncoupled; this will act as a
mechanical stop in case of an uncontrolled fall of the structure.
In order to make the machine safe during the descent phase:
1- Hook the anchoring bar to the appropriate lock in order not to hinder the
correct descent of the system;
2- If the system is brought to the lower stroke (therefore in a position of minimum
height), the bar will automatically release to allow the ascent; otherwise, select
the chosen position to hook the bar which will act as a mechanical stop in case
of an uncontrolled fall of the structure.

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 17
EN
During the use of the lifting platform it is very important to pay the utmost attention to the
ascent and descent maneuvers. During the ascent/descent phase the operator is required to
distance from the lifting platform according to the length allowed by the control panel cable.
The personnel who are not in charge of using the motorcycle lifting platform must not pass or
stand in the operating area of the machine.
The machine must always be operated by only one Operator.
Once the motorcycle is loaded on the lifting platform, position it in a vise, then
place the additional lifting component under the bike, lift the arms and fasten them
firmly to the bike.
GIVEN THE BEARING VALUE INDI ATED ON THE PLATE:
Do not exceed the load capacity of the lifting
platform; Use it only to lift objects;
Do not modify the lifting platform;
The load must always remain firm and stable.
3.6 Pictograms
Danger of crushing hands with the lifting platform arms.
When the platform is at the desired height, insert the locking bar to prevent it
from falling down accidentally.
Load the motorcycle only when the platform and the additional lifting component
are completely lowered;
Before lifting it, make sure that nothing is supported by the ramp;
Do not lean the rear wheel of the motorcycle on the ramp during and after lifting.

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 18
EN
4 Transport and handling section
4.1 ransport, handling and storage
CAU ION: Disseminate the instructions described in this chapter to all personnel
involved in the transport and handling of the machine.
For safety reasons, the moving parts must be locked before transport.
4.2 Packaging and transport
The machine is not sold separately from the lifting platform to which it has been connected. It
is supplied with a cardboard packaging placed on the pallet. Besides the scissor lifting
platform and its additional elements, the package includes the additional MTA516 component,
the automatic vise for the front wheel and the joints for the rear wheel belts (Figure 3).
Figure 3 - Example model of lifting platform and MTA component
The machine is tested and in perfect condition.
AT USTOMER'S REQUEST AND IN ORDER TO AVOID DAMAGE TO THE LIFTING PLATFORM
DURING TRANSPORT AND HANDLING A WOODEN ASE PA KAGING IS ALSO AVAILABLE,
WHI H HAS AN ADDITIONAL OST OMPARED TO THE STANDARD FREE PA KAGING.
4.3 Unloading and handling
All lifting and unloading operations must be carried out in compliance with current safety
regulations.

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 19
EN
The cardboard and wooden packaging must be lifted using a forklift truck, by inserting the
forks inside the wooden supports.
During the unloading phase, in any case, pay attention to the vehicles and people in transit.
Make sure there are not many holes in the floor or on the high slope ramps for the vehicle
used, in relation to the load carried; always proceed at low speed with the means of transport.
The unloading from the wooden pallet of the cardboard packaging containing the lifting bench,
carried out manually by no less than four Operators equipped with workshop gloves, must be
done near the location where the machine will be installed.
4.4 Receipt and check
The packaging is made of suitable material and is carried out by expert personnel, but during
the journey it is possible to be deteriorated or damaged.
Upon receipt of the machine, immediately check if the packages are clearly damaged. If so,
accept the goods with reserve, by making photographic evidence of any damage.
Open the box by cutting the clips and the closing adhesive tape.
Make sure all the material shown on the delivery note is actually present.
Make sure the parts of the machine have not been damaged during transport and notify any
damage within 5 days of receipt. arrier by REGISTERED LETTER (and notify Bike Lift Europe
s.r.l.), by presenting photographically documented evidence.
4.5 Storage
Pending to be unpacked and installed, the machine must be stored in a suitable environment
in order not to alter its operation.
 Store the packed machine in a closed or covered area above the ground by using
sleepers or similar objects.
 Room temperature and humidity: -5°/75 ° Relative humidity between 30% and 90%.
 Do not overturn the packaging.
 If the machine is stored without packaging, it must be positioned firmly on wooden
sleepers and covered with a cloth.
 Do not stack anything on the machine.
It is recommended that the unloading or handling operations to be carried out
with a forklift truck by a single Operator equipped with workshop gloves, safety
footwear and protective helmet, as required by current regulations.
This Operator must pay maximum attention to all transport phases.
Do not allow any other person to stand in the operation area of the forklift truck
in order to prevent the accidental fall of the boxes from being dangerous.

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 20
EN
5 Installation section
The machine must be installed in compliance with the safety regulations and instructions
included in this chapter.
CAU ION: OMPLETELY remove the wooden sleepers located under the
lifting platform by removing the fixing screws before using the machine.
The machine does not need a basis, but requires a flat and horizontal floor. The floor must be
able to support a minimum weight of 500 kg/m
2
•
The motorcycle lifting platform must be placed in such a way as to allow the Operator to easily
repair the motorcycles.
The lifting platform must therefore be installed by taking into account the minimum distances
from walls or other possible boundaries (boundaries are imaginary lines that delimit the work
or safety areas of other machines or structures).
The ascent/descent ramp must be positioned so that the bike can be easily lifted. The ramp
must not be directed towards an obstacle that is too close to the motorcycle lifting platform.
CAU ION: It is absolutely forbidden to position the lifting platform on
bumpy or inclined ground.
Bring the machine to the place of installation by using a mechanical lift, unpack it and place it
in the chosen area.
To install the machine, fix it to the floor with 4 dowels M1O x 100 mm, using the appropriate
holes (used to fix the sleepers).
5.1 Power
Foot pump - onnect the hydraulic hose to the nipple on the front side of the pump.
Air pump - onnect the compressed air circuit to the lifting platform.
Electric pump - onnect the electric cable to the power grid using the plug (not supplied),
according to the regulations in force in the ountry of use. The socket must be grounded.
TECHNICAL DATA OF THE ELECTRIC MOTOR:
Use voltage: 220/230 V. Frequency: 50 Hz. Absorbed power: 1kW Use voltage:
110/115 V. Frequency: 0Hz. Absorbed power: 1kW

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 21
EN
WARNING: In the electronic or electro-hydraulic version, the lifting platform is
equipped with an electronic board that transforms the low-voltage current to
prevent the electrocution risk. A fuse calibrated on the amperage of the stable
230V power supply is located inside this board.
It is forbidden to replace/tamper with this fuse with one of a higher
resistance/amperage
5.2 Putting into service
The tests to be carried out before using the machine have the task of verifying that the
mechanical and electrical installation (in the electro-hydraulic pump versions) has been
carried out correctly and there are no breakages or damages that could compromise the
proper functioning and the performance of the machine.
Make sure:
 There are no signs of obvious breakage or damage to the mechanical structures;
 The mechanical safeties previously described are functioning;
 The connecting pipe between the pump and the hydraulic cylinder does not have any
cracks and is in good condition;
 All the seegers placed on the pins are installed correctly
In the versions equipped with electro-hydraulic pump, also check that:
 The electric cable and plug protections (not supplied, but to be installed by the User in
compliance with the ountry's regulations) are in perfect condition;
 The power plug is properly inserted in the socket;
 The electrical power wiring between the pump and the socket is well positioned, not
twisted, does not interact with the passage routes or the storage spaces and does not
interfere with other machineries;
 The connection to the electrical system is suitable for power and amperage in order to
power the electro-hydraulic pump (refer to the data on the plate shown on the lifting
platform).
arry out the connection following the instructions contained in the manual supplied with the
pumps.