BikeMaster RJ-48021 User manual




InstructionDisclaimer

Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer’s instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at [email protected] or
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.

Digital
Torque Wrench
••••••••••••••••••••
•• • •••••••••••••••••••••••••
• • •
o
1 Prodw; Inca Ions
2.CompOtl
nls no F alUres
:3 H WI LJSe O,gilal TorqUe Weer en.
3-4 0 10
3-5. How to
3-6' Turn Off
3-7. Memory
4 Imporlmen saff!gu rds
•••••••••••••
• • •••
n it (I N-
USER
MANUAL
1.0 Nov. 2011

Product Specifications
Model No. : RJ·48021
±2%
Accuracy
Memory
50
0.1
Display resolution 20-200 N-m (14.8 -147.5Ib-ft)
Display Range 1/2 inches
Drive Peak/Track
~ era tion Mode
Unit Selection kg-m, Ib-in, Ib-ft, N-m
480mm
Length 1.2kg
Weight
Gear Teeth
36
Key 5
Battery AAA x 3
110hrs (continuous operation)
Battery Life
Operating Ambient Temperature -10°C -60°C (13.9°F -139.9°F)
Storage Temperature -20°C -
70 °C (-4°F -157.9°F)
15 to 90% noncondensing
Operating relative humidity
Auto shut
off 120 seconds (if do not use wrench.)
Model No. : RJ-48083
Accuracy ± 2%
Memory
50
Display resolution 0.1
Display Range 10-100 N-m (74 - 75Ib-ft)
Drive 3
/8 inches
Operation Mode PeakiTrack
Unit Selection kg-m, Ib-in. Ib-ft. N-m
Length
Weight 480mm 1.2kg -
~ ear Teeth 36
Key 5
Battery
1-=:- '
.. ~attery Li fe
Operating Ambient Temperature
AAA x 3
110hrs (continuous operation)
-10°C -60°C (13.9°F
-139.9°F )
Storage Temperature -20°C -70°C (-4°F -157.9°
F)
Operating relative humidity
Auto shut off 15
to 90% noncondensing
120 seconds (if do not use wrench.) .-

Components and Features
LED
+ (Increase)
Drive
LED
IMemory
I
Buzzer
Peak/Track
I
Battery Cap

--
How to use Digital Torque Wrench
III How to select" Unit",
Press "M" and" PIT" button together and release to select different torque units.
- ,
: - ~~
i
1. When you chang units the target setting will also be changed to the new units value.
2. This electronic torque wrench contains 4 unit selections.
(kg-m, in-
Ib , ft-Ib, N-m).
EllHow to select" Torque Value ",
~
-- -- - ~
-- ~-
~ _ ~1tD
1. Increase (+): 1. Press and hold the (+) button to increase the current target value.
2. The target will show for 10 seconds.
3. After 10 seconds the LCD display 0.00.
2. Lower (-): 1. Press and hold the (-) button to lower the current target value.
2. The target will show for 10 seconds.
3. After 10 seconds the LCD display 0.00.
1. When you are approaching 20 % before the target you will see a flash of red light and hear
an intermittent buzzer warring you that you are approach
in g the target value.
2. When you are target value you will see light and hear buzzer. Stop pulling.
3. 1st flash of light : When you are using the digital torque wrench.
2nd flash of light : When you are approching 20% before the target value.
3rd flash
of light: When you are target value you will see 3 pcs flash light.

How to use Digital Torque Wrench
If you press "M" and " ~" button together.
Turn off the digital torque wrench please.
III Battery Install and Replacement.
1. AAA x 3pcs
2. Keep the end thread clean and dry for a good contact.
3. Open the battery cap.
4.
Remove the old batt er ies.
5. Insta
ll 3 pcs AAA Batteries in the handle (with the "+" sign facing upwards).
Battery
Cap
6. Screw the battery cap .
1.
When batteries are Iowa" (S;J " icon will light.
2. Remove the batteries if stored for a long period of time.
3. Battery life
depends on battery quality and the amo unt of the lights and buzzer are used.
4. Typical life is up to 110 hours
III Power On.
1. Press and release the " ~ " bu tton to turn the wrench on. The LCD panel shows" cr RCE "
2. After 2 seconds the L.C.D panel Show " 00 .0".
3. Swing the Wrench .
4.
The L.C.D displays the torque value measured .
If you do not use the wrench for 80 seconds the wrench will auto matically shut off.