BilJax Multi-Stage AS-2100 User manual

HOW TO REPLACE
AS2100 DECK SURFACE
1
How to Replace AS2100 Deck Surface5/11/2021

PLACE DECK ON ITS TOP
2
How to Replace AS2100 Deck Surface5/11/2021

REMOVE (2) SCREWS
ALONG 4’ SIDES
3
How to Replace AS2100 Deck Surface5/11/2021
REMOVE REMOVE
REMOVE

PULL OFF SIDE RAIL
ASSEMBLY
4
How to Replace AS2100 Deck Surface5/11/2021

TURN OVER DECK
SLIDE OUT DECK FLOOR
5
How to Replace AS2100 Deck Surface5/11/2021
LOOSEN OTHER SCREWS
IF DECK FLOOR IS DIFFICULT TO REMOVE

SLIDE IN
NEW DECK FLOOR
6
How to Replace AS2100 Deck Surface5/11/2021

TURN DECK OVER
PUSH ON SIDE RAIL
ASSEMBLY
7
How to Replace AS2100 Deck Surface5/11/2021

FASTEN SIDE RAIL
ASSEMBLY WITH SCREWS
8
How to Replace AS2100 Deck Surface5/11/2021
FASTEN FASTEN
FASTEN
TIGHTEN ALL SCREWS BEFORE RE-USE.
DO NOT OVER TIGHTEN.

CARE FOR DECK SURFACE
9
How to Replace AS2100 Deck Surface5/11/2021
Deck surface is a high-density polyethylene (HDPE) overlay, laminated to plywood.
The surface is chemical, moisture and mold resistant
that can be spray cleaned with mild solvents.
The quad-ripple surface has excellent wearing capabilities and provides a low-skid surface.
Exposure to humid or wet conditions may cause moisture damage.
You should avoid exposure to extremely high or extremely low moisture conditions.
Standing water on surface of panels may cause color distortion.
Color distortion may also occur when panels are exposed to excessive heat source
that exceeds 130°F (54°C).
Optimum storage conditions are 60°F (16°C) to 75°F (24°C) and
35% to 55% relative humidity.
If you should need to replace your deck surface, the part numbers are:
0105-10-7 Plywood Quad-Ripple - 48in x 96in- Black (4’ x 8’ deck)
0105-12-7 Plywood Quad-Ripple - 48in x 48in- Black (4’ x 4’ deck)