BilJax XLB-3522A User manual

33-090
1
33-090
43’ BOOMLIFT-DC
Bil-Jax XLB-3522A
* SAFETY CHECKLIST:
TOWING
•Check hitch coupler condition and be sure it secures to the ball hitch.
•Check safety chains.
•Check brake cable.
•Check tires for proper inflation.
•Check all trailer lights.
•Make sure the booms and basket are locked in transit.
SPECIFICATIONS:
24 Volt –DC Electric Brakes: Mechanical Surge
Work Height: 43’2” Platform Dimesions: 43” x 30’ x 48”
Platform Height: 37’2” Platform Capacity: 500 lbs.
Maximum Outreach: 22’6” Outrigger Footprint: 12’ x 10’
Outreach from Outrigger Edge: 17’5” Stowed Dimension: 77”H x 16’6”L x 5’6”W
Boom Rotation: 700° Weight: 3150 lbs.
110 Volt Battery Charger
Hydraulic Pressure: 2756 psi
Hydraulic Capacity: 9.75 Gal.

33-090
2
OPERATING:
1. DO NOT USE LIFT IN AREAS WHERE USER OR UNIT CAN COME IN CONTACT WITH LIVE POWER
SOURCE (Maintain and assure a proper safety clearance)
2. While moving the boom lift into position, make your self aware of obstructions or dangers.
Watch for overhead wires and maintain a large zone of safety from the wires.
3. Make sure the boom lift is on level ground, set the parking brake and unhook boom from
vehicle ball hitch.
4. Make sure operating manual, ANSI manual and AME manual are in the storage box on the
lift.
5. Chocking the wheels is highly recommended until out riggers are set.
6. Turn the key switch at the operating control panel to the “Ground Position” (may be a picture)
in order to operate the unit from the ground position.
7. Make sure the battery indicator shows a complete charge.
8. Set each outrigger making sure that all of the outrigger green lights have come on. If they
have not, the unit is not level. Re-set the outriggers until all green lights are on.
9. Unlock all both boom locks.
10. Make yourself familiar with all controls. First operate the unit in the “Ground Position”
before climbing into the personnel basket to operate.
11. Check to make the sure the on/off and safety switches are working properly on both the
ground controls and at the basket controls.
12. Check the condition of the personnel basket.
13. Check all safety devices, hydraulic/air/fuel system for leaks, cable/wiring harnesses for
damage, stickers and control markings are clear and legible, other items as specified in
operating manual.
14. Locate and use emergency stop function.
15. Put on safety harness and lanyard. Attach the lanyard to the basket.
16. Wear safety glasses, long sleeve shirts, long pants and closed shoes.
TROUBLE SHOOTING:
If unit will not operate:
•Has the boom lift been unhitched from the vehicle?
•Check battery indicator to check for charge. The unit can be plugged in while in
operation.
•Are both of the wheels off of the ground?
•Make sure all outrigger lights are on. If a light is out, the unit will not run.
•Make sure both red safety stop switches have been pulled out. If one is depressed, the unit
will not operate.
•Check safety switches on boom and boom cradles to be sure they are functioning properly.
•If machine still fails to operate, send unit back to the store for substitution.
If the outriggers will not rise to transport position:
•The boom or basket has not been completely lowered to allow the unit to settle into the
safety switch. Lower all booms and basket completely down into stowed position. Try
again.