Bindertek Dealer Solutions Bisley+ Desk User manual

Page 1 of 2
Bisley+ Desk Assembly Instructions
What You’ll Need
Assembly
(A) 1 desktop, (B) 1 Bisley Steel Home File Cabinet, and (C) 2 hairpin legs with (D) 2 oor protectors.
Hardware package includes: (E) 1 hex wrench, (F) 8 button head bolts, and (G) 2 rubber grips.
1. Place the (A) desktop on a level soft surface with the 16 bolt holes facing up.
2. Place (C) hairpin legs over existing bolt holes and screw in to place using the (E) hex wrench with (F) button head
bolts, use 4 button head bolts per leg (see diagram).
3. Screw in (G) rubber grips by hand on the other side, in the two holes nearest the center.
4. Once assembled and tightened fully, ip the desktop over (with the help of a second person).
5. Position the assembled desktop with hairpin legs over the (B) cabinet so that the legs are to the left or right of
the cabinet (either placement will work). Lower the side with rubber grips onto the Bisley Cabinet. You can easily
reposition the desk by rotating the desktop and legs to the other side (see images below).
Bottom side of desktop
or
&
&
Bisley left side alignment Bisley right side alignment
Note: assemble on a level soft surface with at least two people to ensure safe assembly and to prevent damage.
A
A
B C
A
C F
F
C
G
G
B C
EF G
D

6. Align the edge of the (A) desktop with the edge of the (B) Bisley Cabinet. Center the cabinet under the desktop
and ensure both (G) rubber grips are resting on top of the cabinet (see diagram).
7. Optional step: place (D)  oor protectors under the (C) hairpin legs if using desk on a wood or tile  oor.
Page 2 of 2
Bisley+ Desk Assembly Instructions
Assembly Continued
Enjoy your new Bisley+ Desk!
Center
Align edges
G
C&
A B