John Lewis Iona 83607705 Product manual

John Lewis Iona Round Dining Table Ø 1000x760 mm
Stock number: 83607705
H76 W100 D100cm

Thank you for purchasing the Iona Round Dining table. Please read the instructions and warnings carefully
before use, to ensure safe and satisfactory operation ofthis product.
At John Lewis, we are committed tomaking great products possible.
From our in-house Design Team, to our Buyers, we work together tobring great design tolife.
Our expert Product Technologists work collaboratively with our buyers and suppliers toassure the legality, safety
and quality of the product we sell.
We are all committed todesigning and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments youmay have.
The John Lewis Team
Time to assemble
1 Hour
People to assemble
Tools required
1

Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
2

Your table
Ref
Description
Dimensions
Qty
Top table H7.9W100 D100cm 1
Side leg H73.7 W6.2 D6.2cm 4
Internal dimensions
Stock Number: 83607705
Table overall size: H76 W100 D100cm
1
2
2
2
2
2
1
3

Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref
Description
Dimensions
Qty
Flat washer 16mm x 1mm 8
Nut 16mm x 6mm 8
A
B
0
10
20
30
60
50
70
40
mm
4

Product assembly
Iona Round Dining table
83607705
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
A
B
C
1
2
1
2
2
+
1
2
2
+
5

Iona Round Dining table
83607705
Step 3 Final Assembly
Parts, fittings and tools
6

Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut- for example, the ‘medullary ray’
which can appear on oak furniture is a mark of good quality timber- these are just characteristics of the natural
beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts
by the way slivers area arranged.
All timber and veneer surfaces will change colour and mellow overtime. New furniture will initially vary in shade
from items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre. Spray
polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up over
time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and
ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home
heating can cause damage such as warping.
Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
7