Bintronic SA-7556 User manual

Apple HomeKit
Instruction Manual
Scan me for
video instruction!

Table of Contents
Control Box Introduction ------- P1
Home Hub -------------------------- P2
HomeKit Specifications ---------- P3
Smart Curtain connection ------- P4
Adding-in Device ------------------ P6
Change the name ------------------ P8
Smart Curtain Control ----------- P9
Add Scene --------------------------- P10
Add Automation ------------------- P11
Home Setting ----------------------- P12
Add People -------------------------- P13
Re-setting ---------------------------- P14
Trouble-shotting -------------------- P15
WIFI Connection Advice --------- P17

HomeKit
Re-Set Key
Status Indicator
DC Power Input Port
Control Box Introduction
Motor Control Signal Port
Motor Power Adapter Port
Blink – Connection Mode
On – WIFI connection on
Off – WIFI connection off
On – Smart Curtain turned on
Off – Smart Curtain turned off
P1

HomeKit
Home Hub
Home Hub is necessary if remote control is required.
HomePod (mini), Apple TV and iPad could be used as the
Home Hub. Please select 1 of the above 3 as the Home Hub.
P2

Product
Model
Operating
Temperature
Operating
Humidity
Working
Voltage
Wireless
Technology
HomeKit
Specifications
P3

Smart Curtain connection to Control Box: Step (1)
4-pin Signal Cable of the Smart Curtain,
connected to [control] port.
HomeKit
Smart Curtain & Control Box
P4

Smart Curtain connection to Control Box: Step (2)
2-pin Power Cable of the Smart Curtain,
connected to [power in] port
HomeKit
Smart Curtain & Control Box
P5

HomeKit
Adding-in Device
Click on
“Add
Accessory”
Home
P6

Scan QR CODE on the
control box.
Manually enter the
code (8 digits).
or
HomeKit
Adding-in Device
P7

Change the name
to “Smart Drape”
or “Smart Roller
Shade.”
HomeKit
Change the name and other settings
P8

HomeKit
Smart Curtain Control
Click on
Device to
open or
close it.
Press and hold
Device to enter
the percentage
mode.
P9

HomeKit
Add Scene
Custom
your
scene
name.
Select
accessories
to include
in this
scene.
Click on it
to add
scene.
P10

HomeKit
Add Automation
Click on
Automation
Control
accessories
using GPS
Control
accessories
at certain
time
When the
accessory
is being
controlled
P11

HomeKit
Home Settings
Click on
Home
Settings.
Switch
between
connected
homes.
P12

HomeKit
Add People
Add
Home…
Click on
“Home
Setting.”
Invite people
by entering
their Apple
IDs and send
invitation.
P13

HomeKit
Re-setting
Re-set Procedures
1. Delete Device from APP
2. Press and hold Re-set button
Use a paper clip to gently press the [Re-set] button next to the indicator
for about 10 seconds; you may re-set your Smart Curtain when the
green LED blinks quickly and goes out for approximately 1 second.
3. Re-scan to add it in.
This shall be done in
Power ON condition.
P14

HomeKit
Troubleshooting
P15

HomeKit
Simple Troubleshooting
1. Shut off smart curtain and control box for 30
seconds and re-start them.
2. Shut off WIFI router for 30 seconds and re-
start it.
3. Re-start Home Hub and iPhone.
4. Re-set control box and re-scan to add it in.
P16

WIFI Connection
Installing multiple HomeKit Devices
Enterprise-class or higher router is recommended
EX: Unifi
P17